Distillation Columns Datasheet 3a3l1g

DISCOVER

WITH

UOP Series: Heat & Mass Transfer Operations

Distillation Columns – UOP3

Considerable advances in the instrumentation and control of distillation columns have been made in recent years, prompted by the advent of computer-linked systems ed by software packages for handling plant operating data. To reflect these advances, Armfield has developed two new state-of-the-art laboratorybased distillation columns that allow safe handson practical training for student engineers and plant operators:> A continuous or batch operation, computercompatible column (model reference UOP3CC) which allows a full range of demonstrations from the introductory stages of a process engineering course through to the more complex demonstrations of modern control strategies.

© Armfield Ltd. 2011

> A batch-only operated version (model reference UOP3BM) manually controlled, permits comprehensive study of the basic principles of distillation. > Both units are designed for safe options using flammable solvents.

NEW & IMPROVED UOP3CC Unique* 8 point sample & feed sieve plate column sections Sample & feed points at every tray Column sections available as a retrofit to existing UOP3CC units

The Armfield UOP3CC has been significantly improved with the addition of sampling ports on each of the trays. Previously, the thermocouple was removed in order to take a sample. The new sampling ports enable vapour or liquid samples to be drawn from each of the sieve plates by simply inserting a hypodermic needle into the septum seal whilst the distillation is in full, continuous operation. In addition, sample ports can be utilised as additional feed positions on each sieve plate. The ports are now fitted as standard, and are available as a retrospective install to existing UOP3CC units. Armfield for more details.

Above: Computer interfaced distillation column UOP3CC shown with safe area console

The latest version of this data sheet is available at:

www.armfield.co.uk/uop3

issue 7

Fig. 1: Column pressure drop as a function of boil-up rate

Fig. 2: Column overall efficiency as a function of boil-up rate

Fig. 3: McCabe-Thiele construction for batch distillation at total reflux (methylcyclohexane-toluene mixture, atmospheric pressure, boiler power 1.0kW)

LABORATORY WORK ASSIGNMENT CAPABILITIES For Batch Distillation Column UOP3BM under manual control: n pressure drop across the column as a function of boil-up rate (Fig. 1) n column efficiency as a function of boil-up rate, at total reflux (Fig. 2) n plate-to-plate temperature profiles along the column n McCabe-Thiele construction of operating line (Fig. 3) n distillation at constant reflux ratio: variation of top product composition with time (Fig. 4) n mass balance across the system n manual control of reflux ratio, for example to achieve a top product of specified composition n comparison of packed column with sieve plate column performance Note: These capabilities can also be performed with UOP3CC.

Fig. 7: Reflux separator during azeotropic distillation of a water/organics mixture

Training on the UOP3CC. One-to-one and group training is available at Armfield or at point of installation.

Fig. 4: Batch distillation: variation of composition with time at fixed reflux ratio of 5:1 (methylcyclohexane-toluene mixture, atmospheric pressure, boiler power 1.1kW)

For Computer-Interfaced Distillation Column UOP3CC only - continuous operation, manual or computer operation: n includes all demonstrations listed for UOP3BM under ‘Batch Distillation Column’ n continuous, steady state distillation including temperature profiles and McCabe-Thiele analysis n distillation under reduced pressure conditions (Fig. 5 - page 6)

n comparison of packed and plate column continuous operation (Table 1) n effect of feed pre-heat (Fig. 6) n effect of feed position (Table 2) n demonstration of azeotropic distillation (Fig. 7) n computer control assignments: - the on-line use of mimic diagrams (Fig. 8) - setting up data logging and subsequent analyses of captured data including use of spreadsheets (Fig. 9) - batch distillation at constant reflux ratio (Fig. 10 - page 6) or varying with time - batch distillation with reflux ratio control from a column temperature (Fig. 11 - page 6) - continuous distillation with 3-term control of reboiler heater from a column temperature - continuous distillation with top temperature controlling reflux ratio - continuous distillation with temperature control of reboiler heater and reflux ratio (two- loop control

UOP3CC Safe area console

n proprietary controller demonstrations: - PLC control of reboiler heater and/or reflux ratio and alarm functioning (requires Armfield PCT19BR unit incorporating an industry-standard PLC) (Figs. 13 & 14)

- demonstration of PC supervision of PLC and PID controllers - an introduction to distributed control systems - PID analog control of reboiler heater from column temperature (requires Armfield PCT20H unit incorporating an industry-standard controller

Fig. 8: On-line mimic diagram during batch distillation at constant reflux ratio [Table]

system)

- optimum controller settings for changes in feed rate, composition or temperature - alternative, -originated control algorithms - process dynamics e.g. monitoring and controlling plant start-up/shut down for continuous operation

Acknowledgements: Figs 1, 2, 3 and 4 and Table 2: Results taken from Armfield UOP3CC Distillation Column in the Process Laboratories of the Department of Chemical Engineering, University of Aston, U.K. courtesy of Dr. J. D. Jenkins

Fig. 9: Typical results displayed in tabular format

Description Batch Distillation Column (Manual) UOP3BM The unit is a self-contained and fully instrumented distillation facility, suitable for practical laboratory work relevant to the teaching of unit operations. The equipment employs galvanically isolated intrinsically safe circuits and flameproof devices as appropriate, to allow safe distillation of standard test mixtures such as methylcyclohexane-toluene, methyl alcohol-water etc. The equipment consists of two interconnected units: a floor standing process unit and a bench-mounted control console. The following features are included: Process Unit n a 50mm diameter plate distillation column containing 8 sieve plates and downcomers. Every plate includes a temperature sensor positioned to measure accurately the temperature of the liquid on each plate. The sheaths of each plate temperature sensor are not more than 1.5mm diameter, to ensure rapid dynamic response. n a 50mm packed column supplied as a separate item, but readily interchangeable with the plate column by the , for comparative studies of the two types of distillation column. n electrically heated reboiler of sufficient capacity for 1-2 hours of batch operation. The reboiler heater is protected against overheating and by a low level alarm. n an overhead condenser with cooling water flow measurement and adjustment. n a condensate collecting vessel, equipped with double overflow weirs and exit pipes to allow separation of immiscible liquids. n a reflux return valve, solenoid operated, to provide for 0%-100% reflux, adjustable by electrical signal. n a differential manometer connected to the top and bottom of the column, to monitor column pressure drop. n a vacuum system with gauge to allow distillation studies at reduced pressures down to 200mbar(abs). n sampling points throughout the system for composition analyses. n materials of construction for surfaces in with the process fluids are; glass, stainless steel, PTFE or similar solvent-resistant materials. n overall height of the process unit does not exceed 2.5 metres (8.2ft). n lagging is provided, although it is possible to see at least one plate in operation with distillation in progress. n maximum operating temperature inside the column operation is at least 130 ˚C.

Decanter

Condenser Dosing vessel Reflux valve

Top product receiver

T T1

Manometer

Vacuum pump

T2 T3

Cooling water

T4

T5

Column

Feed tanks

T6 T7 T8

Reboiler Heater

Heat exchanger

Vent

Feed pump Bottom product receiver

Temp sensor UOP3CC Only Schematic diagram of Armfield distillation columns

Control Console n monitoring and selectable display of at least 13 system temperatures, including those of the liquid on each tray, the reboiler and across the condenser. n monitoring, display and manual adjustment of: i) the electrical power to the reboiler heater. ii) the reflux ratio setting. n front connections to allow the to connect 0-5 Volt industry-standard analog or programmable logic controllers, to provide on-line control of the boil-up rate or reflux ratio from chosen column temperature measurements. The connection points also allow for the use of standard laboratory chart recorders and data-loggers. (Up to two temperature measurements simultaneously). n mains power connection (single phase 3kW max. supply) protected by Residual Current Device. No-volt protection safety circuits to prevent unintentional start-up. n individual circuits protected against excess current with resetable circuit breakers.

Description Computer-Interfaced Distillation Column UOP3CC This unit incorporates all the features of the manually operated batch column described on opposite page (UOP3BM) but includes the following additional items: Process Unit n two 5 litre feed vessels, with rapid changeover to permit step changes in feed composition to be made. n peristaltic feed pump, range 0-0.25 litres/minute adjustable by voltage input variation to the pump motor controller. n electrically heated reboiler of sufficient capacity for 1-2 hours of batch operation, but equipped with an internal overflow when continuous operation is required. n a bottoms product heat exchanger which may either be water cooled or used as a (variable) feed pre-heater. n alternative column feed points and the ability to vary the inlet feed temperature to the column. n dosing feed vessel, connected to the column for the continuous addition of a third liquid component, which, together with the condensate phase separator vessel, allows study of azeotropic distillation. n temperature sensors in each flow stream entering and leaving the condenser and of the feed, product system and reboiler temperatures. Control Console n monitoring and selectable display of at least 14 system temperatures, including those of the liquid on each tray, the reboiler, across the condenser, and of the feed and product streams. n monitoring, display and manual adjustment of: i) the electrical power to the reboiler heater. ii) the reflux ratio setting. iii) the feed rate setting. n ribbon cable connector at rear of the console allows the use of standard laboratory chart recorders and data-loggers (all measurements simultaneously). n USB connector at the rear of the unit allows connection to a supplied PC, via the integral USB interface. n remote/manual switch is provided on the front of the console to allow simple changeover from PC to front control to be made by the operator. n power and motor control circuits shut down automatically with loss of computer control signals (when in computer control mode).

*Armfield UOP3CC is the only unit on the market with this sampling capability, and the column is unique in that it can use flammable solvents. In addition, sample ports can be utilised as additional feed positions on each sieve plate. Correct at time of product release.

Close-up of new column section

PID controller screen from Armfield software Software n bespoke Windows based software, supplied on CD-ROM, allowing real time data acquisition via USB port, mimic diagram of process tabular and graphical display of results, and export to external spreadsheet. n fully configurable, multiple loop control strategies.

control options include: i) manual control of feed rate, reboiler power and reflux ratio. ii) alarm setting. iii) adjustable PID control of the power to the reboiler heater from a temperature sensor. iv) alternative algorithms for controlling the reflux ratio, in particular by programmed variation with time and from a column temperature. v) ‘two point’ temperature control of reboiler power and reflux ratio simultaneously. n full help facilities including presentation screen to provide a brief overview of the equipment, and detailed texts giving all the information required to run the experiments. For further information on the advanced features of the sophisticated Armfield software visit: www.discoverarmfield.co.uk/data/armsoft

Fig. 14: Hard copy of results

Distillation column control using an Armfield PCT19BR Industrial PLC Unit Comparison of batch distillation for different reflux ratio control strategies

Effect of operating parameters on column temperature profile

(Feed rate of 60ml/min, 60% trichlorethylene/40% methylene chloride, boiler power 0.75kW, reflux ratio 2:1)

Fig. 10: Constant reflux ratio Fig. 5: Effect of reduced pressure

Fig. 11: Reflux ratio controlled by top plate temperature

Measurements in Packed column Plate column

Temp. of top plate 48.4 ˚C 48.0 ˚C

Temp. of boiler 82.5 ˚C 85.0 ˚C

Conditions: Feed: 60ml/min of 60:40 trichlorethylene/methylene chloride Reboiler power: 0.75kW Reflux ratio: 2:1 Ambient feed temperature: 17˚C Atmospheric pressure.

Table 1: Comparison of temperatures across packed and plate columns

Fig. 6: Effect of feed pre-heat

Feed to top of column Time

Compositions, m.f. MCH Feed Overheads

Power

Reflux

Temperatures, ˚C

Bottoms Input, kW Ratio Reboiler

O/H Line Top Plate

13.40 0.293 15.00



0.79

2:1

108.8

103.4

103.5

15.15



0.77

2:1

108.4

103.0

102.7

0.79

2:1

107.1

102.9

103.6

0.75

2:1

107.4

103.0

103.6

15.20

0.472

0.088

15.30



15.35

0.464

0.097

15.50

0.481

0.107

Table 2: Results for an alternative feed position

PCT19BR Industrial PID controller

PCT20H Industrial PID controller

INSTALLATION REQUIREMENTS Solvent resistant level floor. Either a flame-proofed room or in an area where a 2 metre clear and uninterrupted space on each and every side and above the unit can be maintained and into which no potentially spark producing equipment should be allowed to enter. Electrical supply: UOP3BM-A: 220-240V/1ph/50Hz @ 13A UOP3BM-B: 120V/1ph/60Hz @ 25A UOP3BM-G: 220V/1ph/60Hz @ 13A UOP3CC-A: 220-240V/1ph/50Hz @ 13A UOP3CC-B: 120V/1ph/60Hz @ 25A UOP3CC-G: 220V/1ph/60Hz @ 13A Cold water supply: 15 litres/min at 2.0bar pressure (min.) Venting: exhaust line to fume cupboard or to safe discharge area outside of laboratory. NB: The distillation unit is floor mounted and is supplied already connected to the bench- mounting control console by sufficient armoured cable to allow the 2m clear space to be maintained around the column.

ESSENTIAL ACCESSORIES Analytical equipment, suitable for composition analyses of any particular liquid mixture selected by the (e.g. refractometer). For UOP3CC only:PC (not supplied by Armfield) with the following minimum specification: n Windows 98 or later n USB port n Pentium processor n 16Mb RAM n 15Mb Hard disk space n SVGA display (800x600, true colour) Note:

It is not possible to upgrade a UOP3BM unit to a UOP3CC unit, owing to the complexity of the flameproof barriers within the UOP3CC control console.

PCT19BR: PLC unit incorporating Allen Bradley SLC500 complete with proprietary ladder logic set-up program (requiring -supplied PC). This program is initially configured by Armfield for two analogue input/output control loops suited to the UOP3 Distillation Column unit (either BM or CC versions), but may be re-configured by s via their PC. PCT20H: PID controller, incorporating a Honeywell UDC3300 series unit, with voltage/mA input and output for single loop control and alarm configurations. Suitable for both UOP3BM and CC versions. A software package is supplied on disk to demonstrate the basic principles of SCADA whereby a -supplied PC can address the PID controller on-line.

DISCOVER

WITH

ORDERING SPECIFICATION UOP3BM:

ORDERING SPECIFICATION UOP3CC:

Batch Distillation Column (manual):

Computer-interfaced Distillation Column:

•S elf-contained sieve plate distillation column unit including reboiler, condenser and reflux tank, suitable for use with flammable solvents and fully instrumented for batch operation.

• Computer-interfaced Distillation Column:

•T emperatures throughout the process including those on each and every sieve plate are monitored and displayed on a bench mounted control console, via a selector switch. The console also houses controls for the power supplied to the reboiler heater and for reflux ratio settings between 0 and 100%. •T he console front connections allow the use of standard laboratory recorders and data loggers and of industry-standard PID and PLC controllers (not supplied). •A U-tube manometer is incorporated to measure pressure drop over the distillation column. •T he 50mm diameter sieve plate column may be readily interchanged with a packed column supplied as an alternative. •A vacuum system allows operation at reduced pressures down to 200mbar(abs). •T he unit is supplied completely assembled including lagging, and a comprehensive instruction manual describes commissioning, maintenance and instructional assignments.

•S elf-contained sieve plate distillation column unit including feed vessels and pump, reboiler, condenser, reflux separator, product collecting tanks, bottoms product cooler/feed pre-heater, suitable for use with flammable solvents and fully instrumented for both batch and continuous operation. • 8x feed and sample points •T emperatures throughout the process including those on each and every sieve plate are monitored and displayed on a bench mounted control console, via a selector switch. The console also houses controls for the power supplied to the reboiler heater and for reflux ratio settings between 0 and 100%. •T he console front connections allow the use of standard laboratory recorders and data loggers and of industry-standard PID and PLC controllers (not supplied). •T he console is designed to be connected to a PC (not supplied), and software is provided to allow on-line data logging, real time trend monitoring and PID control loops to be set up, monitored and configured by the via a mimic diagram. •A U-tube manometer is incorporated to measure pressure drop over the distillation column. •A vacuum system allows operation at reduced pressures down to 200mbar(abs). •A third feed vessel is supplied such that, with the reflux phase separator, azeotropic distillation may be demonstrated.

• T he 50mm diameter sieve plate column may be readily interchanged with a packed column supplied as an alternative.

• T he unit is supplied completely assembled including lagging, and a comprehensive instruction manual describes commissioning, maintenance and instructional assignments.

OVERALL DIMENSIONS Process Height: Width: Depth:

Unit: 2.25m 0.85m 0.80m

OVERALL DIMENSIONS

Control Console: Height: 0.30m Width: 0.52m Depth: 0.40m

SHIPPING SPECIFICATION Packed Volume: Gross Weight:

3.4m³ 425kg

OD

PR

R

TY

ON AL ARMFIE L

L

D

AR 2 -Y R W

2 years

AN

UCT S

<E X T E N D E D >

WARRANTY

Find us on YouTube! www.youtube.com//armfieldUK Follow us on Twitter, Facebook, LinkedIn and WordPress

Process Height: Width: Depth:

Unit: 2.25m 0.85m 0.80m

Control Console: Height: 0.42m Width: 0.52m Depth: 0.40m

SHIPPING SPECIFICATION Packed Volume: Gross Weight:

Head Office: Armfield Limited Bridge House, West Street, Ringwood, Hampshire. BH24 1DY England Telephone: +44 1425 478781 Fax: +44 1425 470916 E-mail: [email protected]

© 2011 Armfield Ltd. All Rights Reserved

U.S. Office: Armfield Inc. 436 West Commodore Blvd (#2) Jackson, NJ 08527 Telephone: (732) 928 3332 Fax: (732) 928 3542 E-mail: [email protected]

We reserve the right to amend these specifications without prior notice. E&OE 0511/1k/SO2796

3.5m³ 450 kg

Scan QR code* to visit our website * S can with smartphone with QR code scanning software installed.

An ISO 9001 Company

Innovators in Engineering Teaching Equipment

learn more! www.armfield.co.uk