Tekla Extensions 2p6z69

Title

Product version

WraparoundPipeFootprints

20

Export to Revit

20

PDMS Interoperability

20.0, 19.1

Form Face Creator

20

DSTV File Name Modifier

Version independent

Print Drawings to PDF

20.0, 19.1

Tekla Civil Integration

20.0, 19.1, 19.0, 18.1, 18.0

20.0, 19.1, 19.0, Rebar Coupler and Anchor Tools 18.1, 18.0

Model Dimensions

20.0, 19.1, 19.0, 18.1, 18.0,...

Label Tool

20.0, 19.1, 19.0, 18.1, 18.0,...

Transmission Tower Template

20

BIM Publisher

Version independent

Construction Sequencer

20

Layout Point Applicator

20

ETABS A&D Link

20

20.0, 19.1, 19.0, Wall Shoe Connection 18.0, 17.0

SDNF mm to metres

Version independent

Dimensioning Tool

20.0, 19.1, 19.0, 18.1, 18.0.x...

Top in Form Marker

20.0, 19.1, 19.0, 18.0, 17.0

Version Tekla Open API Training Material independent, 20.0, 18....

Copy Uda

20

Extension Gallery

20.0, 19.1, 19.0

Area Reinforcement

20.0, 19.1, 19.0, 18.1, 18.0,...

Erection Sequencer

20.0, 19.1, 19.0, 18.1, 18.0

Attribute Importer

20.0, 19.1, 19.0, 18.1, 18.0,...

20.0, 19.1, 19.0, Tekla India AMC Setup 2013 18.1, 18.0,...

BEC-reports

20

ACN Sequencer

20.0, 19.1, 19.0, 18.1, 18.0,...

Virtual Tour

20.0, 19.1, 19.0

IFC Change Management

20.0, 19.1, 19.0, 18.1, 18.0,...

Shrink Tool

20.0, 19.1, 19.0

Solid2Plates

20.0, 19.1, 18.1, 18.0, 17.0

Rebar Release Manager

Version independent, 20.0, 19....

OBJ Export (Export to Render) 20.0, 19.1, 19.0

Drawing Match Line

20.0, 19.1, 19.0, 18.1, 18.0

Curve dimensioning

20.0, 19.1, 19.0, 18.1, 18.0

Copy Using 3 Points

20.0, 19.1, 19.0

Move Using 3 Points

20.0, 19.1, 19.0

Howick

20.0, 19.0, 18.1, 18.0

Data Exchanger

Version independent, 20.0, 19....

Phase Numbering

20.0, 19.1, 19.0, 18.1, 18.0,...

20.0, 19.1, 19.0, Fabrication Process Organizer 18.1, 18.0,...

Hole Reservation Manager 20.0, 19.1, 19.0

Firm Folder Manager

Version independent, 20.0, 19....

DoubleTee Components

20.0, 19.1, 19.0, 18.0, 17.0

Hollow Core Checker

20.0, 19.1, 19.0

Socle

20.0, 19.1, 19.0, 18.0

Comment tool

Version independent, 20.0, 19....

Truss Cambering Tool

20.0, 19.1, 19.0

Neutral File Import/Export

20.0, 19.1, 19.0, 18.0.x, 18.0...

20.0, 19.1, 19.0, Wall Corner Connection 18.0, 17.0

Double Tee Ridge Beam

20.0, 19.1, 19.0, 18.0, 17.0

Assign sequential UDAs

20.0, 19.1, 19.0, 18.1, 18.0,...

20.0, 19.1, 19.0, Hollow Core Slab To Edge Beam 17.0

Hollow Core Slab Plugins

20.0, 19.1, 19.0

Find Number

20.0, 19.1, 19.0, 18.1

RFI Manager

20.0, 19.1, 19.0, 18.1, 17.0,...

20.0, 19.1, 19.0, Wall to Wall Connection Plugin 18.1.x, 18.1...

Wall reinforcement

20.0, 19.1, 19.0, 18.1, 18.0,...

Floor Layout

20

Zpan Stair Dimensions

Version independent, 19.0, 18....

Component Manager

18.1, 18.0, 17.0 SR3, 17.0 SR1...

Combine Part Marks

20.0, 19.1, 19.0, 18.1, 18.0,...

Bolt Dimension Tools

Version independent, 18.1, 18....

Packaging Tool

20.0, 19.1, 19.0, 18.1, 18.0

20.0, 19.1, 19.0, Lifting Lug and Lifting Lug Manager 18.1, 18.0

Plates From Built-up Section20.0, 19.1

Phase Creator

20.0, 19.1, 19.0, 18.1, 18.0

Pattern Line

20.0, 19.1, 19.0, 18.1, 18.0

Weld path

20.0, 19.1, 19.0, 18.1, 18.0

Mesh Cutting List

20.0, 19.1, 19.0, 18.1, 18.0,...

Wall Elementation Components

Hilti Articlenumber Import

20.0, 19.1, 19.0, 18.1, 18.0,...

Advanced Grid Labels

20.0, 19.1, 19.0, 18.1, 18.0,...

Publish to 3D-PDF

20.0, 19.1, 19.0, 18.1, 18.0,...

Workplane Manager

20.0, 19.1, 19.0, 18.1, 18.0,...

Weld Mark Merge

20.0, 19.1, 19.0, 18.1, 18.0,...

20

Curved Beam

20.0, 19.1, 19.0, 18.1, 18.0,...

Bolt Centerline Export

20.0, 19.1, 19.0, 18.1, 18.0,...

Defined Attribute Definitions 20.0, 19.1, 19.0

Default font in drawings

20.0, 19.1, 19.0, 18.1, 18.0

Clipper

20.0, 19.1, 19.0, 18.1, 18.0,...

Smart3D Interoperability

20.0, 19.1, 19.0

Offshore Ring Plate

20.0, 19.1, 19.0, 18.1

Part Presentation Mark

20.0, 19.1, 19.0, 18.1, 18.0,...

20.0, 19.1, 19.0, Neighbor Grids And Com Marks 18.1, 18.0,...

Section Builder

Version independent, 20.0, 19....

Sketch sheets

20.0, 19.1, 19.0, 18.1, 18.0

Edge Preparation Details

20.0, 19.1, 19.0, 18.1, 18.0

Brace drawing

20.0, 19.1, 19.0

Reference Model Importer 20.0, 19.1, 19.0

Drawing Break Lines

20.0, 19.1, 19.0, 18.1, 18.0

Component Variables

20.0, 19.1, 19.0, 18.1, 18.0

Grid Layout Tool

20.0, 19.1

Beam Marks

20.0, 19.1, 19.0, 18.1, 18.0

Auto Task Suite

20.0, 19.1

20.0, 19.1, 19.0, Workflow Manager (Meridian Prolog) 18.1, 18.0,...

Hyperlink Manager

20.0, 19.1, 19.0, 18.1, 18.0,...

UDA List

20.0, 19.1, 19.0, 18.1, 18.0

Weld Preparation

20.0, 19.1, 19.0, 18.1, 18.0,...

Compare Objects

20.0, 19.1, 19.0, 18.1, 18.0,...

Reference Model Scale

20.0, 19.1, 19.0

Cover Dimension

20.0, 19.1, 19.0, 18.1, 18.0,...

Bar Checker

20.0, 19.1, 19.0

Drawing Symbol Manager 20.0, 19.1, 19.0

Detail Manager

20.0, 19.1, 19.0

Base Plate Applicator

20.0, 19.1, 19.0, 18.1, 18.0,...

Anchor Rod Tools

20.0, 19.1, 19.0, 18.1, 18.0,...

Beam Extruder

20.0, 19.1, 19.0, 18.1, 18.0,...

Node Adder

20.0, 19.1, 19.0, 18.1, 18.0,...

CIP Reinforcement

20.0, 19.1, 19.0, 18.1, 18.0,...

Volume of bolt holes

20.0, 19.1, 19.0, 18.1, 18.0

Erection Drawing

20.0, 19.1, 19.0, 18.1, 18.0,...

Can Drawing Rotation

20.0, 19.1, 19.0

Length of edge preparations20.0, 19.1, 19.0

Folded Part Drawings

20.0, 19.0, 18.1, 18.0, 17.0

Attach Part Wizard

20.0, 19.1, 19.0

GA Part Selection

20.0, 19.1, 19.0, 18.0, 17.0

Model Checker Suite

20.0, 19.1, 19.0, 18.1, 18.0

Welding Tools

20.0, 19.1, 19.0, 18.1, 18.0,...

Offset Tools

20.0, 19.1, 19.0, 18.1, 18.0,...

Apex Haunch

20.0, 19.1, 19.0, 18.1, 18.0

Database Information

Version independent

SDI Export

19.1, 19.0, 18.1, 18.0

19.1, 19.0, 18.1, Measure tool and embed placing 18.0

Version Tekla Structures Configurator independent

Export to Software

19.1, 19.0, 18.1, 18.0.x, 18.0...

Modify Component Input

19.1, 19.0

In-Model Reviewer

19.1, 19.0, 18.1, 18.0, 17.0.x...

BAMTEC Import

19.1, 19.0, 18.1, 18.0, 17.0

FlyThrough

19.1, 19.0, 18.0, 17.0

Import Point Cloud

19.1, 19.0

I-Beam Reinforcement

19.1, 19.0, 18.0, 17.0.x, 17.0...

19.1, 19.0, 18.1, Edge Reinforcement With Meshes 18.0.x, 18.0...

Check And Manage Rebar Tool 19.1, 19.0

Column Scheduler

19.1, 19.0, 18.1, 18.0, 17.0

Wraparound Dimensioning 19.1, 19.0

Rebar Hole

19.1, 19.0, 18.1, 18.0, 17.0

Part Orientation Review

19.1, 19.0, 18.1, 18.0, 17.0.x...

AutoSaveIt

19.1, 19.0, 18.1, 18.0, 17.0.x...

19.1, 19.0, 18.1, 3Dconnexion Device Installer 18.0 RC, 18....

Crane Console

19.1, 19.0, 18.1, 18.0, 17.0

No paint area

19.1, 19.0

Array tools

19.1, 19.0

Phases and Lots to Tasks

19.1, 19.0, 18.1, 18.0, 17.0,...

Drawing snapshot creator 19.1, 19.0

Auto Bolt

19.1, 19.0

Cap Plate Detail

19.1, 19.0, 18.1, 18.0, 17.0

Pipe Doubler Plate

19.1, 19.0, 18.1, 18.0, 17.0

Ring Plate

19.1, 19.0, 18.1, 18.0, 17.0

Offset

19.1, 19.0, 18.1, 18.0, 17.0

19.1, 19.0, 18.1, Channel to channel bolted connection 18.0, 17.0

Bolt Washer Checker

19.0, 18.1, 18.0

Part Cut Review

19.0, 18.1, 18.0, 17.0, 16.1,...

Tool

19.0, Version independent

Framecad Integration

19

Advanced Option Changes

19

Rebar Group Editing Tool

19.0, 18.1, 18.0

GA Drawings Copier

19

Shoring tower and deck

19

Version Copy Unitechnik saved settings independent

Drawing Detail Manager

18.1, 18.0, 17.0, Version inde...

Wall Connection Components 18.1, 18.0

18.1, 18.0, Version Custom Component Dialog Editor independen...

Data Extractor

Version independent, 18.1, 17....

Version Reference Object Import Scripts independent, 18.1, 18....

Extend

18.1, 18.0, 17.0

Drawing Preview

18.1, 18.0, 17.0

18.1, 18.0, 17.0.x, Convert PDF to Reference Object 17.0

Celsa Steel XML Export

18.0, 17.0

Version Point Cloud 2 Reference File independent

Modify Wall

18.0, 17.0, 16.1, 16.0

Formwork Components

18

Version Unitechnik Weld Mesh Converter independent

18.0, 17.0 SR3, 17.0 Drawing Beam End Mark Tool SR1, 17.0...

Materials Handling Components 17.0 SR3, 17.0

Assembly Comparer

17.0, 16.1, 16.0

Import From Tekla BIMsight

17

Tekla Animator

17

Quick Beam

17

Rebar Dimension Tools

Remote SDNF

17

Version independent

Tiltup Layout

17

Mobile Navigation Toolbar

17

Installation Sequence

17

Version Part Attribute Setup (objects.inp) independent, 17.0

Step Iges Converter

Version independent

Ring reinforcement

17.0, 16.1, 16.0

Sandwich ties

17.0, 16.1, 16.0

SFS Intec Fästdon

Version independent

Layout Manager (Trimble) 16.1, 16.0

Directory Browser

16.1, 16.0

easi-edge

16.1

Namvaran CIP Components17.0, 16.1, 16.0

Rapid Prototype Converter

Version independent

COG Dimensioning

16.1, 16.0

Sloping Slab Drainage

General Embeds

16

17.0, 16.1, 16.0

Quality

Modified

Rating

s

Experimental

30 Jun 2014

  (0)

30

Experimental

27 Jun 2014

  (0)

320

Experimental

27 Jun 2014

  (1)

1030

Experimental

25 Jun 2014

  (0)

53

Experimental

15 Jun 2014

  (3)

288

Experimental

12 Jun 2014

  (19)

Tekla Approved

12 Jun 2014

  (0)

422

Experimental

11 Jun 2014

  (8)

1186

Experimental

09 Jun 2014

  (6)

2223

Experimental

09 Jun 2014

  (10)

1961

Experimental

04 Jun 2014

  (5)

1301

159

Experimental

03 Jun 2014

  (7)

549

Experimental

02 Jun 2014

  (1)

126

Experimental

02 Jun 2014

  (1)

117

Experimental

30 May 2014

  (0)

161

Experimental

22 May 2014

  (0)

402

Experimental

22 May 2014

  (0)

185

Tekla Approved

20 May 2014

  (9)

5885

Tekla Approved

20 May 2014

  (2)

623

Experimental

14 May 2014

  (12)

Experimental

14 May 2014

  (0)

18202

59

Tekla Approved

09 May 2014

  (4)

1108

Experimental

09 May 2014

  (3)

1597

Experimental

08 May 2014

  (7)

1389

Experimental

05 May 2014

  (2)

1820

Experimental

02 May 2014

  (5)

1925

Experimental

30 Apr 2014

  (0)

78

Tekla Approved

28 Apr 2014

  (8)

668

Experimental

25 Apr 2014

  (3)

987

Experimental

25 Apr 2014

  (5)

2583

Experimental

23 Apr 2014

  (8)

925

Experimental

21 Apr 2014

  (3)

1661

Experimental

19 Apr 2014

  (1)

565

Experimental

19 Apr 2014

  (2)

581

Experimental

19 Apr 2014

  (2)

1128

Experimental

17 Apr 2014

  (7)

2060

Experimental

16 Apr 2014

  (4)

775

Experimental

16 Apr 2014

  (3)

760

Experimental

15 Apr 2014

  (1)

368

Experimental

14 Apr 2014

  (5)

3322

Experimental

14 Apr 2014

  (15)

2441

Experimental

14 Apr 2014

  (5)

1335

Experimental

10 Apr 2014

  (2)

386

Experimental

10 Apr 2014

  (1)

33

Tekla Approved

10 Apr 2014

  (0)

532

Experimental

10 Apr 2014

  (0)

116

Experimental

10 Apr 2014

  (1)

201

Tekla Approved

07 Apr 2014

  (15)

Experimental

04 Apr 2014

  (2)

5353

450

Tekla Approved

03 Apr 2014

  (7)

933

Experimental

02 Apr 2014

  (0)

313

Experimental

02 Apr 2014

  (0)

310

Tekla Approved

02 Apr 2014

  (7)

795

Experimental

02 Apr 2014

  (1)

218

Experimental

02 Apr 2014

  (0)

89

Experimental

02 Apr 2014

  (11)

1893

Experimental

02 Apr 2014

  (12)

2319

Experimental

01 Apr 2014

  (3)

899

Experimental

01 Apr 2014

  (5)

1978

Tekla Approved

01 Apr 2014

  (0)

147

Experimental

24 Mar 2014

  (3)

1118

Experimental

24 Mar 2014

  (5)

1135

Experimental

24 Mar 2014

  (2)

1880

Experimental

24 Mar 2014

  (10)

1936

Tekla Approved

21 Mar 2014

  (3)

1779

Tekla Approved

21 Mar 2014

  (1)

764

Experimental

21 Mar 2014

  (5)

524

Experimental

21 Mar 2014

  (0)

534

Experimental

19 Mar 2014

  (3)

1167

Experimental

19 Mar 2014

  (5)

1377

Experimental

19 Mar 2014

  (2)

1087

Experimental

19 Mar 2014

  (1)

909

Experimental

19 Mar 2014

  (1)

1280

Experimental

19 Mar 2014

  (1)

1565

Experimental

18 Mar 2014

  (35)

Tekla Approved

17 Mar 2014

  (7)

2549

Tekla Approved

17 Mar 2014

  (2)

2149

12590

Tekla Approved

17 Mar 2014

  (5)

3030

Experimental

17 Mar 2014

  (5)

862

Experimental

17 Mar 2014

  (2)

568

Experimental

17 Mar 2014

  (3)

975

Experimental

17 Mar 2014

  (6)

1826

Experimental

14 Mar 2014

  (2)

587

Tekla Approved

14 Mar 2014

  (2)

809

Experimental

14 Mar 2014

  (4)

1120

Experimental

14 Mar 2014

  (2)

1296

Experimental

14 Mar 2014

  (6)

2675

Experimental

13 Mar 2014

  (6)

717

Experimental

13 Mar 2014

  (5)

2121

Experimental

13 Mar 2014

  (1)

439

Experimental

13 Mar 2014

  (2)

892

Experimental

13 Mar 2014

  (13)

Experimental

13 Mar 2014

  (8)

829

Experimental

13 Mar 2014

  (1)

312

Experimental

13 Mar 2014

  (3)

874

Experimental

13 Mar 2014

  (1)

283

Experimental

13 Mar 2014

  (0)

580

Experimental

13 Mar 2014

  (1)

856

Experimental

13 Mar 2014

  (3)

1120

Experimental

13 Mar 2014

  (15)

4209

2692

Experimental

13 Mar 2014

  (13)

3815

Experimental

13 Mar 2014

  (1)

548

Experimental

12 Mar 2014

  (2)

1100

Experimental

12 Mar 2014

  (0)

475

Experimental

12 Mar 2014

  (4)

1205

Experimental

12 Mar 2014

  (0)

791

Experimental

12 Mar 2014

  (4)

1537

Experimental

12 Mar 2014

  (4)

2363

Experimental

12 Mar 2014

  (4)

2736

Experimental

12 Mar 2014

  (1)

929

Experimental

12 Mar 2014

  (2)

1386

Experimental

11 Mar 2014

  (0)

601

Experimental

11 Mar 2014

  (2)

1450

Experimental

11 Mar 2014

  (0)

225

Experimental

11 Mar 2014

  (0)

222

Experimental

11 Mar 2014

  (4)

2364

Experimental

10 Mar 2014

  (2)

591

Experimental

10 Mar 2014

  (2)

1538

Experimental

10 Mar 2014

  (4)

3236

Experimental

28 Feb 2014

  (1)

2988

Experimental

28 Feb 2014

  (1)

2170

Experimental

28 Feb 2014

  (0)

1306

Experimental

11 Feb 2014

  (2)

324

Experimental

23 Jan 2014

  (0)

311

Experimental

14 Jan 2014

  (2)

946

Experimental

13 Jan 2014

  (2)

499

Experimental

14 Dec 2013

  (7)

5642

Experimental

28 Nov 2013

  (1)

300

Experimental

21 Nov 2013

  (2)

2136

Experimental

20 Nov 2013

  (0)

169

Experimental

31 Oct 2013

  (8)

1918

Experimental

28 Oct 2013

  (2)

695

Experimental

11 Oct 2013

  (0)

704

Experimental

09 Oct 2013

  (0)

490

Experimental

04 Oct 2013

  (1)

200

Experimental

26 Sep 2013

  (3)

898

Experimental

19 Sep 2013

  (1)

590

Experimental

19 Sep 2013

  (1)

1013

Experimental

18 Sep 2013

  (4)

1104

Experimental

18 Sep 2013

  (9)

1885

Experimental

18 Sep 2013

  (9)

2169

Experimental

16 Sep 2013

  (7)

2660

Tekla Approved

16 Sep 2013

  (0)

815

Experimental

16 Sep 2013

  (3)

843

Experimental

13 Sep 2013

  (1)

971

Experimental

11 Sep 2013

  (3)

303

Experimental

16 Aug 2013

  (2)

1008

Tekla Approved

16 Aug 2013

  (5)

2404

Experimental

16 Aug 2013

  (3)

2136

Tekla Approved

16 Aug 2013

  (2)

1566

Experimental

15 Aug 2013

  (7)

2284

Experimental

14 Aug 2013

  (1)

1108

Experimental

26 Jul 2013

  (2)

525

Experimental

22 Jul 2013

  (0)

568

Tekla Approved

20 Jun 2013

  (2)

492

Experimental

12 Jun 2013

  (0)

88

Tekla Approved

23 May 2013

  (1)

303

Experimental

15 Apr 2013

  (5)

1278

Experimental

25 Mar 2013

  (4)

426

Experimental

13 Mar 2013

  (0)

165

Experimental

07 Mar 2013

  (0)

51

Experimental

16 Feb 2013

  (15)

6516

Experimental

19 Dec 2012

  (0)

Tekla Approved

28 Nov 2012

  (21)

3952

Experimental

16 Nov 2012

  (3)

1294

Experimental

09 Nov 2012

  (1)

247

Experimental

09 Oct 2012

  (27)

3206

Experimental

04 Oct 2012

  (2)

1906

Experimental

01 Oct 2012

  (8)

2561

Experimental

04 Sep 2012

  (0)

189

174

Experimental

17 Apr 2012

  (4)

270

Experimental

30 Mar 2012

  (0)

251

Experimental

30 Mar 2012

  (1)

450

Experimental

26 Mar 2012

  (0)

80

Experimental

15 Mar 2012

  (1)

431

Experimental

31 Jan 2012

  (2)

890

Experimental

17 Jan 2012

  (4)

976

Tekla Approved

25 Nov 2011

  (2)

554

Experimental

07 Oct 2011

  (6)

1526

Experimental

07 Jul 2011

  (5)

1048

Experimental

31 May 2011

  (1)

251

Experimental

24 May 2011

  (0)

344

Experimental

10 May 2011

  (0)

193

Experimental

06 Apr 2011

  (0)

396

Experimental

06 Apr 2011

  (5)

599

Experimental

29 Mar 2011

  (8)

1298

Experimental

10 Mar 2011

  (5)

2951

Experimental

14 Feb 2011

  (1)

293

Experimental

14 Feb 2011

  (0)

342

Experimental

11 Feb 2011

  (0)

145

Experimental

10 Feb 2011

  (0)

370

Experimental

09 Feb 2011

  (2)

277

Experimental

04 Feb 2011

  (0)

134

Experimental

04 Feb 2011

  (1)

327

Experimental

04 Feb 2011

  (1)

236

Experimental

04 Feb 2011

  (3)

301

Experimental

04 Feb 2011

  (1)

168

Tekla Approved

04 Feb 2011

  (0)

506

Desription

The wraparound pipe footprint extension can be used to draw the footprints of connecting pipes in unwrapped part drawings.

Simplified IFC export to Revit with software specific settings. This export can be used with the BIM Publisher to set up (scheduled) exports of multiple models at once.Export to Revit previously belonged to the Export package. Tekla Structures export to to Software PDMS is an application which produces a .ifcZIP file. File contains IFC and needed other files. PDMS application will read files and create PDMS objects. Installation file creates Tekla Structures application and PDMS package zip file includes needed files for PDMS. Note: This is still in beta phase and under development. to address: [email protected] Form Face Creator is used to add surface treatment representation of formwork to part surfaces. This enables the to get very accurate reports of the formwork areas in their model, quickly and easily. This tool is developed to help Tekla Structures customers to customize NC file names. Default NC files are being created with only Piece Mark whereas some customers would like to have Project Number, Profile and Material in NC file names. It is all possible with this new tool.

This extension provides a WYSIWYG (what you see is what you get) preview of a selection of drawings and provides options to export them as PDF files, save them as plot files and to print them on a selected printer. This tool imports surface models from Tekla Civil to Tekla Structures and back.The main features of the application are:• Setting the coordinate transformation between Tekla Civil and Tekla Structures, • Importing desired surfaces from Tekla Civil to Tekla Structures as triangle networks, • Inserting beams to defined, • Exporting defined beam surfaces back to Tekla Civil line geometries,

A toolbar to split and/or create couplers at the location of split between two rebars. Also adding end anchors to rebar ends is now possible. Once the couplers and/or anchors are created they can be shown in drawings and can be inquired by reports.

This tool allows s to easily pick faces or lines in the model to quickly measure distances for model review and checking purposes. The all reduces the number of clicks required to get dimensional values compared to the free dimensioning tools in the model. The dimensional values are drawing along the line or all of the edges of a face picked as temporary graphics and can easily be removed by “updating” or “redrawing” a the current view in the model.

This tool allows s to rapidly check individual properties of multiple selected objects in the model at once vs. using reports, the mini toolbar, or custom inquiry tool alone. Any model object types that have defined attributes and report properties can be queried. The can also save away presets for different object types. This speeds up the review and checking of items in the model vs. having to review and check items on drawings. V170.2 Fixed beam parts showing label even with end elevations unchecked. Set of components to model transmission towers. Creates a model template "Transmission Tower" that includes all the components and typical settings. Please look at the documentation attached as well as the help pages in Tekla Assitance to get more information about how to use this components.

The BIM Publisher performs a batch export of multiple models and their drawings in different formats. Available formats are 3D DWG, IFC, DGN and Revit* for models, and DWG and DXF for drawings. Add as many models you need, choose which filters to use and export them with any installed Tekla Structures version starting from version 18.0. You can do this automatically during the night so that everyone in the team will have fresh models in the morning. The Construction Sequencer is intended to provide Project Managers, Steel Erectors and Concrete Contractors with a Building Information Modeling based tool to assist with planning and execution of onsite activities.

Creates layout points for selected and/or filtered model objects based on solid geometry. Works off selected object or can search the model for filtered types. can specify which layout point settings to use for each application of points. Works for columns, beams, reinforcement, footings, pad footings, and reinforcement.

The Tekla Structures/ETABS plugin allows the to easily transfer the structural model data from Tekla Structures & ETABS, and to insert a ETABS model into a blank Tekla Structures model.

The connection places wall shoe, anchor bolt and additional reinforcement. It is typically used between precast staircase wall s.

With Intergraph’s PDS application if a project is started in metres due to real-world coordinate issues then all the SDNF imports have also to be in metres rather than the normal millimetre conversion. This application converts the required dimensions for all cases and works with: Packet 00 - Title Packet Packet 10 - Linear Packet 20 - Plate elements Packet 22 - Hole elements Packet 60 - Curved A video showing the functionality is included with the .

Dimensioning Tool creates dimensions in the selected drawing view based on defined rules. Dimensioning Tool enables to define what should be dimensioned, where the dimensions should be placed, in which order they should be created, and which settings should be used for each dimension.The tool should be used, if the automatic dimensioning does not provide the desired results.The tool is created primarily for dimensioning precast cast unit drawings, but it can be used also in assembly drawings. It can be used in any drawing view: front, top, section views, etc.

This drawing macro creates triangle symbols in GA drawing plane views to show the top in form faces of the columns. In the model the top in form faces are usually the same faces where the lifting loops or anchors are placed for transportation in horizontal position. In versions prior to Tekla Structures 19, the extension is known as Column Top in Form Marker. These are visual Tekla Open API documentation and training materials we will introduce at the 2011 Tekla North American meeting. The basic material is setup for someone new to C#, Visual Studio, and the Tekla Open API but familiar with Tekla Structures. The idea is to make the presentations and content visual with what someone is used to seeing in the model matched with the code it takes to make that in the API. Copies uda from one field to another for each object selected or by filter

The Extension Gallery provides an easy to use way to find, launch and organize extensions. The gallery is context dependent, so it shows drawing plugins and macros when a drawing is open and model macros otherwise. In addition to the extensions that are automatically discovered, custom programs can be added to the gallery manually. The Area Reinforcement plugin automatizes the process of reinforcing walls and slabs.

The Erection Sequencer is used to define the order of items to be erectected. Reports and animations can then be produced and delivered to Project Managers or Site Crews

This application assigns defined attributes to any model object base on filters and rules. It can also set the numbering prefix and start number if entered.

This setup contains tools that cater to the following segments:- 1) CIP 2) Grating 3) Built up 4) PEB 5) Drawing Tools 6) Material Handling 7) Duct & Plate Work 8) Modelling Tools

This zip-file contains reports that are created in BEC2012-project (a national Finnish precast modelling development project). Reports are meant to be used in 20.0 final release. File contains also instructions (.txt-file) and ElementWeight.dll-file that is essential for these reports to work.

This tool is used to assign Assembly Control Numbers (ACN) to model parts so that defines the order of the numbers by picking the parts.

Use the Virtual Tour extension to create navigations in your model in perspective views. This tool allows you to define times between frames, pauses in frames and also change view representation between frames,Management e.g. you can create erection sequence imports navigations This IFC Change tool in an coordination with Teklanavigation. StructuresItunique IFC Reference created with the Fly Through extension model technology and the Tekla IFC object converter allows project team to visually inspect the modifications, deletions, and additions of materials between two different IFC format models in Tekla Structures at any time. The can control which properties stored in the IFC file they want to compare, such as profile, material grade, length, piecemarks, etc. Project team can also get printed reports showing the description of the changes on those parts and properties that are different for submission of change orders to other project participants and the owner. Since these changes are automatically being detected and reported in the 3D environment, costly delays and rework caused by days of manually processing change orders from 2D drawings This tool allowsreduced the thus to shrink contourplate can be greatly bringing savings totyped all of objects. the project participants and the owner.

This tool reads the faces of solid objects that are created in the model and created contour plates on top of each face. This makes it easier for s to model in ductwork, bins, hoppers, etc. first as generic objects using the beam and polybeam command with parametric profiles. This is easier than the having to manually model in plates for each duct face. The plate objects created are grouped together as an assembly and use saved away contour plate properties settings.

The Rebar Release Manager allows s to more accurately manage rebar releases before releasing for fabrication. s can status rebar, assign coatings, assign or remove rebar to releases, and export rebar information to Soule and aSa rebar MIS systems.

OBJ (or .OBJ) is a geometry definition file format first developed by Wavefront Technologies. The file format is open and has been adopted by other 3D graphics application vendors. The format is widely used for visualization, animation and render software. This extension exports a Tekla Structures model to OBJ format. Match lines are typically placed on plan drawings to designate breaks poinits between plan drawing sheets. s of this tool can more quickly place match lines that are customizable in line type and thickness.

This Extension creates radius and diameter dimensions in drawings. It can create automatic dimensions for curved as well, by just picking a curved member and a point to dimension in the curve.

This extension allows copying selected objects by rotation with 3 points

This extension allows moving selected objects by rotation with 3 points.

A set of plugins and connections for the Howick light steel framing system, including an export to the Howick machine. Includes a manual explaining the best practice for working.

This tool allows customers to easily import and export defined attributes for Parts or Assemblies (Including Cast Units) from Tekla Structures into an external XML file. This allows s in the field or jobsite to easily set statuses on a copy of the model and send an xml file back to detailers, project managers, or even designers back in the office to import status attribute data into the production Tekla Structures Model. This tool also simplifies loading preset colorization statuses associated to imported defined attributes. There is also a standalone Data Exchange version that doesn’t require Tekla Structures which allows anyone with a device running windows (including laptops and tablet PC’s ) to load a Data Exchanger xml file set statuses and save data away back to the XML to be imported back into the Tekla Structures model. This tool also allows development customers and software partners with Tekla to easily get a list of parts or assemblies from the Tekla Structures model including a GUID and Part/Assembly mark identifier in order to import into their applications, then associate data to those parts/assemblies and send that data back to be imported into Tekla Structures. This is all done using a generic XML file format. This now allows partners to simply just deal with parsing an XML file vs. Having to learn the Tekla API in any way to do a data exchange. There is also a .cs (C Sharp) serialization class included on the extrane which partners or s can use to easily load the xml file into their .NET programs if needed.

This tool finds all of the phase numbers in the phase manager, and allows the to associate an assembly and part number series start number for parts based on that phase number. The reason for this is to allow s to keep assembly and potentially part marks separated by Phase. The tool will automatically set the assembly and part (part is optional) start number based on the setup in the dialog box.

This tool allows s to easily find steel parts in the model requiring specific types of shop labor – copes, bevel cut ends, holes, and shop welding. This tool will also set a defined attribute value on the parts making it easy to colorize, filter, organize, and report parts in the model based on their fabrication process. This is especially useful for fabrication estimation and organizing drawings, CNC files, and BOM reports to match preferred shop process routing.

Application for managing void hole reservations (ifc void objects) created with HVAC software.

Double Components package contains four predefined separate components: DoubleTekla tee to beam This toolTee can be used to create Firm folder with settings for 1. different Structures connection: The connection creates fastening plates on the beam(s), neoprene pads glued to the environment / version. ribs of double tee beam, and the steel plate that is welded to fastening plates during erection of the building. The connection also creates round holes through the double tee beam ribs. 2. Double Tee Top End Connection: This connection creates the fastening plates located on ribs in the end of the double tee slab. It also creates round bars that are welded into fastening plates at the Hollow Core Slab anTop addition to Tekla Structures extension “Model Checker Suite”. construction site. Checking 3. DoubleisTee End Detail: This detail type extension creates two fastening Hollow core slab checking adds a check to “Model Checker Suite” allowing you to perform plates on the rib location in the end of a double tee beam. 4. Double Tee Side Connection: various This checks specific for hollow core slabs. The hollow core slab specific checking includes following extension connects the double tee beam long sides by adding appropriate standard steel parts, checks:Minimum and maximum length of slabs, end angles of slabs, - Proper creating cuts and adding a loose steel plate that is- Minimum welded into standard steel parts on thewidth of narrow slabs., Minimum number of continuous and solid webs, Location and maximum size of construction site. openings including checking of allowance of multiple openings inside same section., Installation Socle tool creates a socle with three shells. core canslab enter different measures package contains a settings file for Parma, a Finnish hollow manufacturer profiles.for each shell to adjust the width, height and start and end point fittings. It is also possible to Installation places this file to Finnish and Default environments, if they are installed. modify upper edge shapes and add timber to insulation. Tool also includes possibility to add start and end point parts, door opening and drainage holes

The comment tool allows s to communicate changes, questions and work assignments directly into the model. You can link model snapshots, view locations, clipping planes, parts, DWG or IFC reference objects and documents to the comments. The comments can then be shared with other comment tool s or with people viewing the model in Tekla BIMsight. This installs two related components. The Truss Cambering Tool is used in the model to facilitate the creation of a pre-cambered truss from an existing truss. It does this by taking camber data from the and adding camber values as attributes to the truss booms and shorten/lengthen attribute values to the truss lacings. When a drawing of the truss is created, the Truss Cambering Diagram drawing plugin is then used to create a stick diagram illustrating the deformed shape of the truss.

These import/export extensions are designed to integrate Tekla Structures with CSC's Fastrak Building designer and Orion design software. The Fastrak links allow round tripping of information between Tekla Structures and Fastrak Building Designer. The import will create Tekla Structures beams, columns, slabs, shear walls etc. If the neutral file contains updates to a previously imported model the import will compare the import file’s contents with the existing model and show the use the differences. This gives the control over which parts of the model are updated. The export to Fastrak produces a file in the cxl format. This file can be sent to Fastrak Building Designer to update the Design model or create a new Fastrak model based on the Tekla Structures’ physical model. The extension can be used to export the entire Tekla Structures model or a selected subset of the model.

A corner connection, which places U-bars and additional recesses for shear force transfer.

Creates a double tee beam with ridge and has an option for slab thickening in the end. Dialog texts are correctly translated only if Finnish environment is installed. This tool is used to assign sequential numbers to model parts. The numbers are stored as defined attribute (UDA) values. The tool has settings for e.g. start number, step value, prefix, etc.

Hollow Core Areacuts Endthe Recess: The extension is designed work and with adds hollow core slabs created ou This component hollow core slab ends to desiredto length the seam reinforcement of Tekla Structures or hollow core slabs created with Tekla ‘components’. This extension between the hollow‘beams’ core slabs and anchors the rebars inside the edge beams. uses the ‘Hollow Core End Recess’ extension to create the electric/sewer grooves. Hollow Core Area Middle Recess: The extension is designed to work with hollow core slabs created out of Tekla Structures ‘beams’ or hollow core slabs created with Tekla ‘components’. This extension uses the "Hollow Core Middle Recess" extension to create the bathroom recesses. Hollow Core Middle Recess: The extension is designed to work with hollow core slabs created out of Tekla Structures ‘beams’ or hollow core slabs created with Tekla ‘components’. This extension will create auxiliary beams, cuts, and fittings in order to create the electric or sewer grooves. Hollow Core Middle Recess: The extension is designed to work with hollow core slabs created out of Tekla Structures The Find or Number s a quick and easy way to instantly findwill a part or assembly ‘beams’ hollowextension core slabsgives created with Tekla ‘components’. This extension create auxiliary number (piece mark) in the modeltowithout to define beams, cuts, and fittings in order create having the recesses andfilters. cross beams.

Allows s to Manage Requests for Information (RFI's) and link and view them with the model. This includes linking IFC reference model objects as well as native. The can customize and print the RFI's to an HTML format, then also publish to an FTP site behind their company website. RFI status of "Open", "Closed", and "Overdue" can be colorized in the model and the RFI manager can automatically check if any RFI's are "Overdue" in the list. RFI's can be filtered and storted by subject or status. RFI's can be easily zipped, attached to an email, then drag/drop the zip attachment into the RFI list. Finally objects linked with an RFI can be published to IFC, and easily inserted. Below is the 4th installment (beta) version for Tekla Structures 17.0 and then also a brief video showing some of the features. We are looking for comments and .

This plugin creates a connection between two concrete walls.

Plugin for reinforcing typical wall cases

This tool is intended for creation and modification of floors build of precast filigree and hollow core slabs etc. The floor may contain several layers like precast slabs, insulation and/or cast in place topping. You will get more value from this tool when the boundary of the floor in non-rectangular, contains one of more openings splitting slabs in many pieces and/or the slab widths can’t be constant on whole area of the floor. This tool allows steel detailers and engineers to quickly apply the appropriate in position dimensions for zpan stairs including riser, run, and diagonal spacing information.

Creates general arrangement drawings of custom and system components in the model directly from the model based on customizable drawing settings.

WARNING: Don't use on Assembly drawings that you link to Multi Drawings. This tool allows s to create a combined part mark callout for parts on assembly drawings where the out of the box combine part marks doesn’t achieve the desired result. The selects a part in the assembly drawing and the tool will automatically scan through the view the part was selected in and it will find the quantity of parts with the same part mark that appear in that view. The then picks to points which represent the location of the mark leader and then the placement point of the mark text. The part mark content will then display the quantity of that part mark found in the view (not the entire drawing), then “-“, and ends with the part mark itself.

These tools allow s to quickly add bolt location dimensions in shop and erection drawings. Simply pick the bolt group, then the part the dimensions will be aligned to, and optionally a reference point for the bolt dimensions to start from and the tool will automatically add all of the x and y dimensions for the bolts in that group on the drawing.

Packaging Tool will help to create, send and track packages of drawings, NC files, reports and other model output.

Lifting Lug allows the to define a bolted lifting lug's dimensions and places either the parts of that lug, or just the set of holes required to connect it, automatically onto the top faces of selected beams in the model based on the centre of gravity of the beam assembly. Lifting Lug Manager allows the to apply lifting lugs to appropriate steel beams, and facilitates keeping them in the appropriate location as the they are attached to change. It also allows the to modify selected groups of lifting lugs using new settings.

This extension is aimed to help the detailing of three plate beams, used in many industries such us offshore and PEB. Model and detail your three plate beams as I beams and use this component to create the three plates ready to be sent to fabrication. Note that modifications in the I beam, such as profile or geometry changes, will update the three plates. But if connections affecting the beam such as changing number of bolts in a splice, it won't update the directly the plates, you will need to open the dialog and click modify. This works as well with tapered beams.

This application imports and exports the phase list of the phase manager This extension includes two tools: Pattern Line Plugin which allows to create custom lines in drawings, and Pattern Line Editor which allows the to create and modify those custom lines which will be used by the pattern line plugin. Use this tool to draw the weld path of model weld in the drawings. This tool uses pattern lines to draw the weld paths, if you need to define your own you can use the pattern line editor.

This application creates a list of meshes in a graphical format. The meshes are sorted and meshes of the same type combined to one standard mesh. The application is also optimizing the placemen of the individual meshes to fit better on a standard mesh size placeholder.

Wall Elementation Components are meant to be used to model prefabricated concrete wall structures, either solid walls, double walls or sandwich walls. Wall Elementation Components are a set of seven plug-in which shall be used together: Wall manager, Seam controller, Edge controller, Opening controller, Detailing controller, Corner handler & Auto Elementation. This application allows the to import Hilti articlenumbers from an csv file which comes with this installation. The article number is stored in an uda field of the bolt itself and can be shown in reports and drawings.

This application gives the the more possibilities to define the grid labels. Grid labels can be defined with an extra text. This text can be freely defined in the model and shown on the drawing.

3D PDF technology by Adobe: sharing your 3D designs is just as essential as creating the design in the first place. So when you're ready to distribute and discuss your 3D designs with others, PDF is the ideal format. Interactive 3D PDF files look exactly like the original 3D design, regardless of the application used to create it or the environment in which it's viewed. This enables improved communication and faster decision-making, which helps reduce design errors, improve quality, and increase productivity. This Tekla Structures add-on was designed to create a 3D-PDF document containing the Tekla Structures 3D model. The selects either to include the whole model or just selected parts. Furthermore the has several options to include bolts, rebar and attributes to be exported. The add-on utilizes IFC data, hence the attributes being part of the 3D-PDF document can be defined in the file 'IFC_properties_sets.inp' - more information about this you will find from the Tekla Structures online-help.

Use this extended application to save and manage the work planes in a model.

Use this tool to merge identical weld marks in drawings.

Use this tool to create curved beams in the same manner as the two-point curved beam command but with the end result of a poly-beam.

The bolt centerline export aids in exporting assemblies in DXF or DWG format for use with fabrication quality assurance systems. Using this extension, a surface export of the assembly parts and a separate export representing the center lines of bolt holes in the assembly are generated for each selected assembly. Some commercially available laser scanning systems and software can use these files as a basis for comparing the fabricated assembly and bolt holes against the model design for quality assurance and checking.

Tool for setting default font to be used in drawings.

Clipper is tool for model navigation. Clipper uses clip planes and work plane adjustment for splitting model to smaller pieces for visualization and modelling. It is possible to save clip boxes and slices for reuse. Using tool changes picking setting from view to work plane. The Smart™ 3D Interoperability extension provides import and export tools that allow the exchange of information between Tekla Structures and Intergraph's Smart™ 3D design system. Current product compatibility is Tekla Structures V19.0 and V19.1, with SmartPlant® 3D 2011 SP1, SmartMarine® 3D 2011SP1 and Smart3D® 2014. the extension documentation for more details about the workflows, scope and limitations of the extension. Offshore Ring Plate will create ring plates and cap plates which are needed at the connection of beam flanges and round pipe columns. Offshore Ring Plate will only create the ring plate and will not create connection between the web of the beams and the ring plate or the web and the pipe.

Use this tool to create special part symbols for parts in a drawing.

Use this tool to include additional information about the location of an assembly in assembly drawings by indicating the neighboring grids and/or the com directions in assembly views. Application to create beams, columns, braces, plates, etc. based on Microsoft Excel data sheet (CSV file). Video included to see how to use the application.

Use this tool to gather similar assemblies dimensions together for fabrication inspection reports. Please watch the video and the model containing the cloning template, report and excel sheet.

Edge preparation details component creates automatically section views and chamfer dimensions for parts containing preparation details. The tool needs some tuning in the view properties file to be used: - Scale - Size needs to be "Define as distances" not as "fit by parts" - Part needs to be set to exact if you want to show edge chamfers - Dimensions can be also tuned specifically for this tool.

This component allows you to rotate the brace drawings ‘in position’ instead of how Tekla Structures orientates the views. By using this component, it is easier to that brace details and setting-out points are correct.

This application improves the usability of inserting reference models into Tekla Structures. s can insert several reference models at once, set the project coordinate system in the interface and automatically subdivide IFC reference models during import. Once reference models are inserted, they are treated just like any other reference model. All typical file formats are ed (DGN, IFC, DWG, etc). s can quickly apply rectangular and circular break lines to objects by picking two points in the drawing. This will make the editing time of drawing sections and details much faster.

This tool helps s more quickly map Tekla component fields to set up Excel design sheets. s can view a list of component variable names and values when selecting a component in the model The list of properties can then be copied and pasted into Excel. This application allows contractors to more quickly model layout points at grid intersections. Point labels are automatically set based on the grid labels. Points can be offset in different arrangements. Points created are loaded into the Layout Manager for export to robotic total stations. s can apply associative notes to objects in drawings based on nine possible locations relative to the member axis. Applications include placing end forces on ends of with more control.

The Auto Task Suite is an application for running macros automatically in Tekla Structures after performing certain events like opening, saving or numbering a model. This automation allows to work faster and with less error.

A solution that integrates Tekla Structures with Meridian Prolog Converge.

An application that allows you to link web-sites and documents to model objects. Plus integration with online BuildSite documents. The UDA List is a testing, localization and development tool that shows all Defined Attributes and values, including those written directly by the API, attributes within components and those written to mutli-level assemblies. It also allows purging of UDA's too.

This tool allows a to quickly pick a plate to weld to then the surface and edge of another plate to automatically create a weld preparation and polygon weld along that edge for single and double bevel groove welds.

Compares two selected parts or assemblies, giving a complete hierarchial treeview type list of all contents and their respective properties. Shows differences between parts/assemblies in red so there is no more guess work to find out what is different between two objects. s can more quickly scale reference models and 2D pdfs dynamically within the model. It is especially useful for concrete contractors who insert 2D pdfs and wish to scale them using the dimensions already shown on the pdf.

Creates a horizontal or vertical cover dimension from the edge of a rebar to the edge of concrete in a drawing. Bar Checker lists all rebar in the model so the can check and fix rebar properties as needed. Reporting in several formats is ed. Renamed Drawing Detail Manager, this application allows s to more quickly save away and reuse drawing sections and details on their 2D drawings. See Drawing Detail Manager for versions previous to 19.0

This tool allows s to create sections and details on General Arrangement (GA type drawings quickly and easily through a simple interface. It circumvents the need to identify, cut sections and define blowup details by combining all of these processes into one action.

Often times Structural Engineers define column schedules with corresponding base plate details on their design drawings. In many cases the base plate thickness, width, height, number of anchor rods, and anchor rod embedment are closely related to the column size also used in the column schedule. The Base Plate Applicator allows detailers and engineers to accurately and automatically apply different base plate components and settings to a selected group of columns in the model. The columns may be different profile sizes, similar profile sizes but with different class numbers, different rotations, and even different bottom of column elevations yet the Base Plate Applicator will automatically load the appropriate saved base plate settings and place the base plate at the bottom start point of the selected columns that match a rule in the schedule. This saves a lot of time for the and helps increase the accuracy of the appropriate base plate details being applied to the correct columns.

This tool allows a to select a group of base plate details (system or custom components) and automatically generate blown up sections and details on a general arrangement drawing based on the connection codes defined on the general tab of component dialog boxes in the model.

This tool creates consecutive beams with any profile and can be used for bridge modelling. The tool uses an external excel spreadsheet where you define start points for the beam segments and which profile to use. Custom profiles can be created in Tekla Structures. A sample model (ExtrusionTestModel) is attached to the installation package. The sample model contains extension presets with a couple of sample profiles and two sample spreadsheets (these are located in the folder ‘excel’ in the sample model folder).

This tool simply adds a node (a customized beam type object) at the end of every selected beam type part within Tekla Structures. It will sequentially assign a number to each of the nodes applied. If many of the selected beams have similar endpoints, duplicate nodes will not be created. Nodes can be moved around in the model or through the extension interface, and the associated beam ends will follow. You can then create reports or drawings showing the nodes and their respective numbers. The node parts are given the name “NODE” and can be viewed with a customized view Plugins for continuous reinforcement of consequtive beams of imaginative shapes. Can be used representation. with (but is not limited to) beams created with Beam Extruder. Limitations: The plugins can proces max 100 input parts in one go, and the beam sequence cannot bend more than 90 degrees. These cases can be reinforced in multiple sections. Note: In the Mainbar plugin you should use the option "single bars" if possible, as rebar groups aren't flexible enough to follow complex geometry. This Extension calculates the volume of the bolt holes that affect a part and writes it into a UDA, BOLT_HOLE_VOLUME. You can see the values in the UDA field when inquiring the part. You can use that UDA in reports to calculate the real volume of the part, and also weight.

Use this tool to create plan/elevation drawings using a selected grid.

This extension finds the short/shallow point for pipes. In offshore drawings it is traditional to position the short point of the starting end at the top of the drawing view.

Calculate the amount of edge preparations needed per plate.

This tool helps s to create workshop drawings of bent or folded parts and plates containing both the folded and unfolded views in a single drawing.

Use Attach Part Wizard component to easily attach parts which are already be detailed. Bolts, edge chamfers, welds, and reinforcements associated to an attaching part are lost when the part is attached with the attach part command. The attach part wizard handles these details for you by reasg them to the newly formed part so the details are not lost. Use this tool to filter GA drawings according to selected parts, or to find and select parts in the model based on the selected drawings.

This tool allows to to perform different checkings over a model. E.g: Check for illegal/invalid material, profiles, make sure that all parts and assemblies have drawings created for them, look fo parts which are not bolted or connected. Welding Tools is a tool kit for easier modeling and editing of complex polygon welds.

A toolset for defining offset or gap between . Use these tools before adding any connections, details or plugins to offsetted . These tools work currently only with regular straight TS profile beams/columns. They don't work with polybeams nor composite objects created with TS macros/plugins (Composite brace, Rolled cans, Tapered beams/columns etc.).

The Apex Haunch connects two rafters at the apex of a portal frame.

This little tool helps you to find out which Tekla Structures version was used to build the model, custom component or sketched profile - without having Tekla Structures. Just drag'n drop a .db1 or .uel file to the dialog and get the version information displayed.

SDI Export is used for exporting reinforcement information to Steelpac SDI format. The Tekla Structures export extension s SDI format release 1.5.0. The reinforcement data can only be exported from cast unit drawings, general arrangement (GA) drawing is not ed.

This extension includes two new tools. Measure tool allows to measure distances between any points,edges or surfaces in the model. Embed placing shows a preview distances before component is inserted

This extension is used to create customer configuration. Firm folder and role file will be created. It can also be used to set up configuration sent by a customer.

Simplified IFC export with software specific settings to ArchiCAD, Cep+, QuickPen and Revit.

Use this extension to change the inputs of selected components. This actually recreates the component, so numbering is not kept.

The In-Model Reviewer application allows engineers, architects and contractors to perform a mode based review of steel or concrete fabricator shop drawing submittals. Fabricators can package up assemblies or cast units by submittal and deliver them to the review team. Review comments made in the Tekla model are written to 2d pdf drawings. Revision handling of submittals is ed. The In-Model Reviewer works on top of all Tekla Structures configurations with exception to the Viewer. To learn more about this process, please watch the videos below or visit www.tekla.com/IMR.

BAMTEC is a particularly cost effective procedure for planning, manufacture and installation of surface reinforcement for reinforced concrete slabs, reinforced concrete floors and reinforced concrete walls. BAMTEC elements are used instead of normal reinforcement. These contain exclusively uni axially installed round steel bars which are combined into an assembly unit using transverse steel bands. This extension imports .TEC production files in order to visualize the reinforcement carpet in the Tekla Structures model.

This tool allows you to save your navigation through the model in perspective mode, then play it back or scroll through it. You can save the navigation to file, and load multiple saved navigation files for later use. This is similar to the older Tekla Structures Model Reviewer functionality where you would store your views, then press the play button and you would be flown through each of th saved views in your model.

This application was designed to process point cloud data files and to make those accessible in Tekla Structures. The application allows to optimize (downsample) point clouds, trim point clouds and to split the resulting reference files (DWG, DXF) into single packages.

This plug-in can be used to easily reinforce an I-Beam with bend meshes in top and bottom flange, stem meshes, u-bars in top flange and longitudinal bars along the beam.

Plugin component able to create “U” shaped edge reinforcements using bent meshes.

This extension allows to check individual lengths of rebars into rebar groups. It also allows to handle rebar groups easily.

Column Scheduler creates and updates graphical column schedules based on model selection.

The Wraparound Dimensioning application helps create dimensions for pipe or tube ends in wraparound template drawings. These dimensions can be used in layout of points for manual cutting or quality assurance.

Use this tool to create penetration holes for reinforcement bars in a steel part.

The addon reports the model part orientation and related information in a dialog, which rows can be sorted. the can either select particular parts in the model or the entire model to be reviewed. This little add-on was designed to enable saving the Tekla Structures model and drawing based on a defined time intervall. The standard auto save feature in Tekla Structures works based on activities in the model or in the drawing instead.

With this application a Tekla Structures can install the needed configuration files to be able to utilize 3Dconnexion devices (such as SpacePilot) with Tekla Structures. The installation of 3Dconnexion's own driver is not needed.

Allows erectors and field superintendents to place cranes and animate their movements for planning and to prevent construction clashes on the jobsite. The can simulate lifting assemblies and cast units into place from a lay down area. Also a report can be generated showing a list of the distance and weights assemblies are from the center of the tower crane. Use this tool in conjuntion with the Tekla Animator extension. Reference Model Objects can't be used and you need to have a model authoring configuration to use this such as Engineering or a Detailing configuration. This tool only s Tower Cranes not Crawler Cranes.

Use this component to create no paint area surfacing between parts bolted together.

Two components to create intelligent linear and radial copies of objects. Choose the directions and intervals to create the copies, also choose if you want to copy only selected objects or associated objects (to the selected objects). Use this extended application to create tasks from phases, from lots, or from phases with child tasks by lots. The assemblies in the phase or lot are also added to the tasks.

Create the snapshots for the selected drawings for an open model.

The AutoBolt plug-in helps in the modeling of bolts in complex situations. AutoBolt makes bolt creation easier by automatically identifying the best rotation for bolts and will automatically find and bolt nearby parts. AutoBolt also allows the to specify as one group a set of bolts which wi be split over several parts, such as a splice connection.

This tool has been moved to Tekla Structures installation from version 20.0 onwards. You can find it in Component Catalog. Cap Plate Detail component creates a cap plate to a column/beam or a polybeam.

Pipe Doubler Plate connection creates a doubler plate between main part and the secondary part.

This tool creates a ring plate detail around one input part. It creates a center cut to plate and adds plate to input part's assembly by default, but doesn't create any weld(s) - please use "Welding Tools" Extension for accurate polygon weld modeling. Note: After installation this detail can be started from Component Catalog.

This tool is similar to the Copy Offset command for lines in many 2D CAD applications. This allows s to quickly copy at an offset distance any beam framing geometry in plan views of the Tekla Structures 3D Model. Installs to 17.0 RC1.

This component creates a bolt connection on two channel parts.

With help of this Tekla Structures extension the can check for high-strength bolt connection in the model. In case a high-strength bolt connection is created with one washer instead of two the missing second washer is added automatically.

With this little tool it is easy to check part cuts and sizes. The part and cut information are shown in the application dialog and can be saved to a report file or to a text file.

The new and improved Tekla Structures tool. This new version of the tool includes a streamlined Interface to make ing your local Tekla team simple.

The Framecad integration extension is a set of tools used to integrate Tekla Structures and Framecad Detailer using Framecad's .fim file format This tool detects which advanced options been changed in the model. It does this by comparing advanced options in the open model with your default advanced option settings. It only applies to model specific options.

New intuitive functionality for editing rebar allowing easy modification to accommodate changes to rebar spacing, hooks, diameter and bending radius. This application makes a copy of selected GA Drawings inside the same model.

Modeling shoring towers and deck s allows contractors to do sourcing and scheduling with accurate data instead of calculated values. Engineers have a new possibility to add more services based on the model. Modeling shoring towers allows you to create accurate drawings and reports from model.

With Tekla Structures 19.0 the Unitechnik export component obtained a new internal code number. Due to this saved settings will have a different number in the file extension as well. Opening a model created with an older version of Tekla Structures the saved settings of Unitechnik export wil not be found. The existing saved setting files must be renamed to be found from the new Unitechnik export component. To simplify that task small application has been created to automatically modify the file name of the saved settings.

This tool allows you to easily select lines, free placed text without leader lines, polylines, rectangles, clouds, polygons, circles, free placed symbols without leader lines, and arcs and save them away into a *.ddf (Drawing Detail File) so you can insert standard 2D details drawn on one sheet to many other drawings on the project or in other models. We are looking for on the use cases and value of this tool. Please post ratings and comments below.

A set of 15 components, which are useful for detailing the wall connections. They can also be used to connect the middle cast-in-place layers inside the double-walls. They will work only on s with 2 input points (no 'polybeam' s). They are meant to be used with the Elementation tools

This tool has been included in Tekla Structures installation from version 19.0 onwards. Detailing > Components > Edit Custom Component Dialog Box.

This is a generic solution for extracting report property or defined attribute data from the Tekla Structures model for Parts, Assemblies, Reference Model Objects, or a nested Assembly>Part list using a model plugin vs. directly extracting the data from your external application. The plugin is used because it is up to 20X faster than scanning the model from an external .NET application. This is for use by developers that use the Tekla Open API. The plugin scans the model for the repor or attribute data and writes it to an intermediate XML file in your model folder.

Package contains two scripts for importing masses of reference files (DGN, DWG, DXF, etc.) automatically, multiple files or complete folders. PDF document with basic instruction included. ZIP contains the scripts for version 14 onwards. These tools are similar to the line editing functionalities that appear in 2D CAD applications but instead are used for beams in the model. This allows s to utilize those familiar tools as they migrate into modeling structural framing in the 3D environment of Tekla Structures. These tools also reduce the number of commands required by the Tekla Structures when modifying sloping, or skewed framing geometry in the model.

Use this tool to create and see a preview of a selected drawing. Note: when the creation of images starts leave the extension finish and don't try to open other applications while is running, you can cancel the process if needed. This Tekla Structures extension was design to help in converting portable document files (PDF), containing 2D CAD drawings, to AutoCAD DXF files. The resulting DXF file can be used as Tekla Structures reference object. The add-on uses other applications which need to be installed first.

Celsa Steel Service is one of Europe's leading manufacturers of reinforcement products. The Products are manufactured in Norway, Sweden, Finland and Denmark. This extension exports reinforcement to be further processed with Celsa's reinforcement report application 'Q-armering'. 'Q-armering' is available to from Celsa Steel Service website.

The application ‘Point Cloud 2 Reference File’ was designed to transfer point clouds (XYZ coordinates) provided as text files to Tekla Structures importable reference files, Autodesk DXF or DWG format. The resulting DXF or DWG files can also be used with Tekla BIMsight. This little extension was designed to change the thickness or the height of a wall very quick, with very minor input. Just select what to change, enter the new value and apply the change. Done.

These are included in Tekla Structures version installation (from TS18.1 onward). Just import the Cast_In_Place_Metric.uel from …\environments\common\components_sketches\CIP\ to component catalog and start modeling formwork. Use components to create everything required [incl. ties, clips, s and clamps] in basic timber site formwork.

This Tekla Structures add-on was designed to modify Unitechnik (open interface for the precast industry, to transfer precast piece related information to precast production systems) exported file to suit special requirements of mesh welding machines and its preprocessor software. The major purpose of the application is to split Unitechnik mesh data records into single files – Unitechnik file can contain multiple sets of mesh per cast unit, which herewith will be split into single cast unit files. In addition further Unitechnik specific data records can be modified. The Beam End Mark tool creates drawing part marks for beam end forces and moment connection symbols. The force values and moment connection information is pulled from the beam's End Conditions -defined attribute tab. The has the flexibility to control the mark prefix, suffix and units of shear, moment and axial forces. Engineers and detailers can more effectively model materials handling conveyor trusses, tower s and even idler and belt systems with this set of custom components. View assembly contents and compare two assemblies based on position numbers. NOT DEVELOPED ANYMORE, PLEASE TRY SUBSTITUVE EXTENSION “COMPARE OBJECTS”.

This tool allows s of Tekla Structures to import Tekla BIMsight *.tbp files. This s the workflow where project participants will be combining, clash checking, and communicating with models from many disciplines and BIM applications in Tekla BIMsight but want to take advantage o the benefits of doing project estimation, scheduling, field layout management, facilities management and deployment, among many other tasks using Tekla Structures for Construction Management. Structural detailers may also import IFC structural design models and convert them to native parts for detailing. Now it is easy to transfer the work from Tekla BIMsight seamlessly into Tekla Structures. Import from Tekla BIMsight has been included in Tekla Structures installation from version 18.0 onwards. You find it in the File menu.

This tool allows you to select assemblies, parts, and bolts in a particular order to create a construction simulation of your Tekla Structures projects. This tool speeds up the everyday production of inputting beams that fill up floor bays as well as removes the need for the to constantly have to load, and apply properties before placing new beams or modifying existing beams. The can simply select existing beams in the model, then double click on the attributes they want the beams to be modified to, or double click on a profile that they want the beams to be modified to. The tool was designed primarily to help with input of steel beams, but could be used on other material types.

This tool allows s to easily create group dimensions on Cast Unit and General Arrangement drawings in the case where there are many single rebar or strand objects in the cast unit that traditionally are not automatically dimensioned by Tekla Structures and the needs to manually add dimensions to. This tool removes the need to pick each of the rebar dimension points and automatically does that for the .

This postprocessor provides a fix for reducing the remote SDNF issues. These files can be created in PMS, PDMS etc where the may be using real-world co-ordinates to create their modelling requirements. This program either sets the origin (0,0,0) to the first elements coordinates start position, or allows the to define a remote reference position. Also the allows the exported file to be transfered back to the original position as well. See the zip file for documentation.

This tool will allow you to select concrete s in the model, and lay them down horizontally as they would be poured in the field prior to being tilted up. This tool is useful when trying to calculat form quantities of tilt up s and managing site layout of to be poured s. This tool allows Tekla Structures s to more easily work with tablet PC’s and mobile and hand held computer technology to navigate and work in the model using finger touch and pen stylus command activation vs. a mouse driven control environment. Motion Computing is one sample of a Tablet PCallows solution, then using like Connect, VMware View sequence Client you This tool youand to quickly pickapplications any object in theDesktop model and createoran installation can connect the iPad to a machine running Tekla Structures. order list to create a simulated installation animation. This is useful for Sales and Preconstruction presentations. This is similar to the Tekla Animator except it works with reference model objects, doesn’t require defined attributes or object representation, and can be used in conjunction with the reports created using the Template Editor to help make automated rules to define the installation sequence. This tool allows you to generate an objects.inp file to define your own custom Defined Attributes and tab pages on Tekla Structures parts through a graphical interface vs. editing the file through notepad. The converter was designed to transfer Tekla Structures WebViewer models to STEP and IGES format, which are widely used in the Mechanical Design business. Solutions like Solidworks, Catia, SolidEdge, Inventor can read and process STEP and IGES files. Ring reinforcement for slab bay.

Tool for inserting tie components into sandwich assembly. Openings are taken into .

Detta paket innehåller egendesignade komponenter från SFS Intec med tillhörande rapporter för att lista enbart SFS Intec komponenter. Det ingår även hjälpfiler. Komponenterna är skapade för Tekla Structures 15. Allow you to write and read layout points from model. Enable to import and export points from layout equipments e.g. Trimble LM80 on Nomad. This tool finds and then opens the various Tekla Structures related folders for you based on what kind of information you need. This item is included in Tekla Structures installation starting from versions 17.0 onward. You can open the tool by running the Macro DirectoryBrowser from Tools > Macros

easi-edge Safety Solutions has ed forces with Tekla Structures to provide total control for customers when detailing edge protection.

Cast in place custom components from Namvaran company. Zip-package includes instruction videos. This application is designed to create STL (STereoLithography) or VRML (Virtual Reality Modeling Language) model files to be used for 3D printing. The converter will read Tekla Structures 3D-DXF files as input file. Further information on 3D printing from http://en.wikipedia.org/wiki/3D_printing The COG dimensioning extension creates dimensions and or symbols to the Center of Gravity in single part, assembly, or cast unit drawing views.

An extension to model concrete slab topping and drainage. This tool is included in Tekla Structures installation in version 17.0 and onwards.

Updated general embeds for precast