Standards 6x6366

1of 7 Standards

European Standards for destructive test methods EN875

Destructive test on welds in metallic materials –impact tests –test specimen location, notch orientation and examination.

EN 895

Destructive tests on welds in metallic materials-Transverse tensile test

EN910

Destructive tests on welds in metallic materials –Bend tests

EN 1321

Destructive tests on welds in metallic materials. Macroscopic and microscopic examination of welds.

BS EN 10002

Metallic materials –Tensile testing psrt1: Method of test at ambient temperature.

BS EN 10002

Tensile testing of metallic materials. Part 5: Method of test at elevated temperature.

The principal European Standards for Procedure qualifications. EN ISO 15614

Specification and qualification of welding procedures for metallic materials.Welding procedure test

Part 1

Arc and gas welding of steels and arc welding of nickel and nickel alloys.

Part 2

Arc welding of aluminum and it’s alloys

The principal American standards for procedure qualifications are: ASME SECTION IX

For pressure system(vessels and pipework)

AWS D1.1

For structural welding of steels

AWS D1.2

For structural welding of ALIMINIUM

WELDING STANDARDS FOR WELDER QUALIFICATIONS EN 287-1

Qualification test of welders-Fusion welding Part1: Steels

EN ISO 9606-2

Qualification test of welders –Fusion 1 of 7 Standards

2of 7 Standards welding Part 2: Aluminum and aluminum alloys EN 1418

Welding personnel –Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials

The principal American standards that specify requirements for welder qualifications are ASME SECTION IX

For pressure system(vessels and pipe work)

AWS D1.1

For structural welding of steels

AWS D1.2

For structural welding of ALIMINIUM

BS number

Title

BS 499: Part 1

Glossary of welding

Bs 709

Methods of destructive testing fusion welded ts and weld metal in steel

BS 1113

Specification for design and manufacture of water-tube steam generating plant .

BS number

Title

BS 1453

Specifications for filler materials for gas welding.

BS 1821

Specification for class I oxyacetylene welding of ferritic steel pipe work for carrying fluids.

BS 2493

Low alloy steel electrodes for MMA welding.

BS 2633

Specification for class I arc welding of ferritic steel pipe work for carrying fluids.

BS 2640

Specification for class II arc welding of carbon steel pipe work for carrying fluids.

BS 2654

Specification for manufacture of vertical steel welded non-refrigerated storage 2 of 7 Standards

3of 7 Standards tanks with butt welded shells for the petroleum industry. BS 2901: part 3

Filler rods and wires for copper and copper alloys.

BS 2926

Specification for chromium and chromium nickel steel electrodes for MMA

BS 3019

Tig welding

BS 3604

Steel pipes and tubes for pressure purposes: Ferritic alloy steel with specified elevated temperature properties for pressure purposes

BS 3605

Specifications for seamless tube.

BS 4515

Specifications for welding of steel pipelines on land and offshore

BS 4570

Specifications for fusion welding of steel castings.

BS 4677

Specifications for arc welding of austenitic stainless steel pipe work for carrying fluids

BS 4872 Part1:

Approval testing of welders when procedure approval is not required. Fusion welding of steels

BS 4872 Part2:

Tig or Mig welding of Aliminium and it`s alloys.

BS 6323

Specifications for seamless and welded steel tubes for automobile, mechanical and general engineering purposes

BS 6693

Method for determination of diffusible hydrogen in weld metal

BS 6990

Code of practice for welding on steel pipes containing process fluids or their residues

BS7191

Specifications for weldable structural steels for fixed offshore structures.

BS 7570.

Code of practice for validation of arc welding equipment

BS EN 287 Part 1

Qualification test of welders –Fusion welding –Steels 3 of 7 Standards

4of 7 BS EN 440

Standards Wire electrodes and deposits for gas shielded metal arc of non-alloy and fine grain steels

BSEN 499

Covered electrodes for manual metal arc welding of non alloy and fine grain steels

BS EN 3834- Parts 1to 5

Quality requirements for fusion welding of metallic materials

BS EN 756

Wire electrodes and flux wire combinations for submerged arc welding of non alloy and fine grain steel.

BS EN 760

Fluxes for submerged arc welding

BS EN 970

Non-destructive examination of fusion welds-visual examination.

BS EN 910

Destructive test on welds in metallic materials-Bend tests

BS EN 12072

Filler rods and wires for stainless steel

BS EN ISO 18274

Aliminium aliminium alloys and magnesium alloys.Nickel and Nickel alloys.

BS EN1011

Welding recommendations for welding of metallic materials

Part 1 Part 2 Part 3 Part 4

General guidance for arc welding Arc welding of ferritic steel Arc welding of stainless steel Arc welding of aliminium and it`s alloys

EN 1320

Destructive test on welds in metallic materials

EN 1435

Non destructive examination of welds – Radiographic examination of welded ts

BS EN 10002

Tensile testing of metallic materials

BS EN 10020

Definition and classification of grades of steels

BS EN 10027

Designation systems for steels 4 of 7 Standards

5of 7 BS EN 10045

Standards Charpy impact test on metallic materials

BS EN 10204

Metallic products-Types of inspection documents

BSEN 22553(European standard )

Welded, brazed and soldered ts –Symbolic representations on drawings

BS EN 24063

Welding, brazing, soldering and braze welding of metal. Nomenclature of process and reference numbers for symbolic representations on drawings

BS EN 25817

Arc welded ts in steel. Guidance on quality levels for imperfections

BSEN 26520

Classifications of imperfections in metallic fusion welds, with explanations.

BSEN 26848

Specification for tungsten electrodes for inert gas shielded arc welding and for plasma cutting and welding

ISO Number

TITLE

ISO 857-1

Welding and ailed process-VocabularyPart 1-metal welding

ISO 6947

Welds working positions –Definitions of angles of slope and rotation.

ISO 9606-2

Qualification test of welders –Fusion welding.

ISO 15607

Specification and qualification of welding procedures for metallic materials-General rules

ISO 15608

WELDING-Guidelines for metallic 5 of 7 Standards

6of 7 Standards material grouping system ISO 15609

Specification and qualification of welding procedures for metallic materials-welding procedure specification-Part 1-arc welding

ISO 15610

Specification and qualification of welding procedures for metallic materials – Qualification based on tested welding consumables.

ISO 15611

Specification and qualification of welding procedures for metallic materials Qualification based on previous welding experience.

ISO 15613

Specification and qualification of welding procedures for metallic materials. Qualification based on pre-productionwelding test

ISO 15614

Specification and qualification of welding procedures for metallic materials –Welding procedure test

Part 1

Arc and gas welding of steels and arc welding of nickel and nickel alloys

Part 2

Arc welding aluminum and it’s alloys

Part 3

Welding procedure test for the arc welding of cast irons

Part 4

Finishing welding of aluminum castings

Part 5

Arc welding of titanium

Part 6

Copper and Copper alloys

Part 7

Not used

Part 8

Welding of tubes tube-plate ts

Part 9

Underwater Hyperbaric wet welding.

Part 10

Hyperbaric dry welding

Part 11

Electron and laser beam welding

Part 12

Spot, Seam, and projection welding.

Part 13

Resistance butt and flush welding

Note : The inspector should have awareness of 6 of 7 Standards

7of 7 Standards

standards that are printed in bold

7 of 7 Standards