Product Costing Sample 10374o

SAP Product Costing Configuration Published by Team of SAP Consultants at SAPTOPJOBS Visit us at www.sap-topjobs.com

Copyright 2007-09@SAPTOPJOBS All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means electronic or mechanical including photocopying, recording or any information storage and retrieval system without permission in writing from SAPTOPJOBS.

Hello Everyone, A Ware Welcome To You All! We are really excited to offer the complete SAP FICO Configuration pack to the SAP community. This was a much- awaited pack and we are happy to present that to you… As you are aware that our SAP S D PP/QM and MM/WM have already achieved the best selling status and have received lots of accolades and really helped the consultants take their SAP knowledge and career to the next level …I am very confident that FICO configuration package will go a step forward and do much more than that………. For those who have been on our list and who have bought from us earlier you all know that we have over-delivered on each of our configuration packs and we want to do the same thing with SAP FICO config pack too… For those who have visited our site for the first time I would like to welcome you to our site and promise you that we would do our best to ensure that your life at the clients place would be very comfortable… What I have done here is given you a brief of around 128+ pages of content in FICO pack so that you can have a feel of what it would be like in of structure. The whole pack is extremely voluminous, step by step guide this is just a feeler… So I hope you enjoy this…. So lets dive right in…. One more thing this configuration pack is compatible with version 4.7, version 5.0 and 6.0 So you really do have to worry about the version at all.. We have taken care of that… Also all future version changes will be provided as free updates to you. So you can sit back relax and play the music …. The main changes in 5.0 and 6.0 has been New Ledger Configuration and Consolidation and we have covered that in detail in our complete FICO Configuration packs. So you don’t need to worry.

The entire FICO configuration pack comes in 11 voluminous power packed CDS fu ll of meaty content and each sub module in SAP FICO is broken into Configuration, End and Power point. There are tons of bonuses which you get along with this pack including IntegrationCheat sheets, FICO Interview Questions

and a boatload of step by step guides. You can take advantage of the special offer by visting the site below

http://www.sap-topjobs.com/SpecialPP/8431654231.html

All our packs are shipped thru FedEx and reaches you in three days time. One more thing this configuration pack is compatible with version 4.7, version 5.0 and 6.0 So you really do have to worry about the version at all.. We have taken care of that… Also all future version changes will be provided as free updates to you. So you can sit back relax and play the music …. What I want from you now is to do yourself a favour by bringing the brains and wisdom of SAP FICO Experts with more than 12+yrs of implementation experience to your drawing room today. Do it right now my dear friend and take your SAP career to the next level…. You will love it I promise you….

http://www.sap-topjobs.com/SpecialPP/8431654231.html

TABLE OF CONTENTS INTRODUCTION..............................................................................................4 A) Product Cost Planning .................................................................................6 1. Basic Settings for Material Costing ...............................................................6 1.1 Maintain Overhead Cost Elements ..........................................................6 1.2 Define Calculation Bases.........................................................................10 1.3 Define Percentage Overhead Rates..........................................................13 1.4 Define Quantity-Based Overhead Rates..................................................16 1.5 Define Credits .........................................................................................16

INTRODUCTION A Warm Welcome Friends. You are going to love this book and we have taken great efforts to ensure that we present the configuration in a very simple yet detailed manner. Product costing module of SAP has eased out all hassles of costing a manufactured product. Product costing module uses data for valuation from the Production planning (PP) module. The Product Planning Module maintains the Bill of Material and Routing or the Master Recipe. Product Cost primarily consists of Material Cost, Labor cost and Overhead cost To arrive at the material cost, SAP picks up the quantity of raw and packing material required from the Bill of Material. It then valuates this quantity with the various prices available in the material master in accordance with the strategy specified in customizing. In a like manner it does the same to arrive at the labor cost. The time required for each operation is specified in the routing or recipe. This quantity is multiplied by the activity prices maintained in the cost center ing module. We will cover all this and more in this document

We will also cover product cost planning, cost object controlling by period (repetitive manufacturing), cost object controlling by order, cost object controlling by sales order and configuration settings for co-product costing. We had configured controlling area 9100, in the document on cost center ing. We will now do the product-costing configuration in controlling area 9100.

A) Product Cost Planning For doing the configuration we will use the following path on the SAP application screen:SAP Menu  Tools  AcceleratedSAP  Customizing  SPRO - Edit Project 

1. Basic Settings for Material Costing The company A Ltd for its plant 9100 requires the following overheads:1) Material overhead 2) Production overhead It should be calculated as follows:On materials 5 % material overhead should be calculated and on Wages 4 % Production overhead should be calculated. Let us go about configuring the costing sheet from steps 1.a to 1.g . We will now see how to create a costing sheet for the purpose of overhead calculation.

1.1 Maintain Overhead Cost Elements IMG  Controlling  Product Cost Controlling  Product Cost Planning  Basic Settings for Material Costing  Overhead  Maintain Overhead Cost Elements To allocate overhead to products, you need to define overhead cost elements. The SAP system then posts the overheads to these overhead cost elements. The cost center is credited with the overhead cost element and the product or the production order is debited with the overhead cost element. Let us now create secondary cost elements for overhead. Create secondary cost elements of type 41 (overhead).

Update the following:-

Click on Save Create another overhead cost element for production overheads

Click on Save

1.2 Define Calculation Bases IMG  Controlling  Product Cost Controlling  Product Cost Planning  Basic Settings for Material Costing  Overhead  Costing Sheet: Components  Define Calculation Bases The calculation base determines to which cost elements overhead is applied together. We will define 2 bases on which overheads will be calculated:1) Materials 2) Wages Proceed as follows:-

Click on

and update the following:-

Click on Save Select Double click

Update Click on

and Update the following:-

The Raw material consumption is booked to cost elements 400000, 400013 and 400700.This is created as a cost element group 91RMPM. We update this as base for our calculation of overhead.

Click on Save Select Wages are booked under the primary cost element 420003 and 420506 and also wages allocation from other cost center is allocated using secondary cost element 943201.Therefore we specify this as base. Double click Click on

and Update the following:-

Click on Save

1.3 Define Percentage Overhead Rates IMG  Controlling  Product Cost Controlling  Product Cost Planning  Basic Settings for Material Costing  Overhead  Costing Sheet: Components  Define Percentage Overhead Rates We want to calculate 5 % overhead on Material and 4% on wages. But the condition is that, it should be only calculated for plant 9100. To fulfill the above requirement we need to select the dependency overhead type/ plant. Thus the system will only calculate overhead rate for plant 9100. In the Std. SAP system there are quite a number of dependencies available such as plant, order type, overhead type, overhead key, company code etc. Here we can calculate Plan and actual overhead. Plan overhead rate is required for the purpose of planning the cost of the product (standard cost estimate). Actual overhead rate is required for the purpose of charging it to the production order. In this step we will create the overhead rate, attach the dependency and define the overhead rate. Further we will also define whether it is plan or actual. Click on

and update the following:-

Click on Save Select Double click

Click on

Overhead type – 1 is actual overhead rate Overhead type – 2 is planned overhead rate Click on Save

Click

Select Double click Click on

and update the following

Click on To maintain a new dependency the path is as follows:IMG  Controlling Cost Center ing  Actual Postings Period-End Closing  Overhead  Costing Sheet: Components  Extras: Dependencies / Condition Tables Define Condition Tables/ Define Dependencies. Create a new Condition table with table name as 999 You need to select fields Controlling area, Overhead type. Profit center and plant. Create a new dependency. Create a new access sequence. In this access sequence you will assign the condition table.

1.4 Define Quantity-Based Overhead Rates IMG  Controlling  Product Cost Controlling  Product Cost Planning  Basic Settings for Material Costing  Overhead  Costing Sheet: Components  Define Quantity-Based Overhead Rates In addition to percentage-based overhead rates, you can also define quantity-based overhead rates, for example, 100 INR per tonne). You can determine overhead rates in the plan and actual. Here too you need to attach the dependency. We will not configure a quantity overhead.

1.5 Define Credits IMG  Controlling  Product Cost Controlling  Product Cost Planning  Basic Settings for Material Costing  Overhead  Costing Sheet: Components  Define Credits By defining the credit key you are crediting the cost center and debiting the product or the production order. The credit on the cost center happens with the overhead cost element which we created earlier 910001 Material overhead and 910002 production overhead. Here we attach the overhead cost center which is to be credited.

You can also define what percentage of the overhead is to be allocated as fixed costs. Therefore we will create 2 credit keys one for material overhead and other for the production overhead. Click on

and update the following:-

Click on Select Double click Update the following:-

Click on

We update the cost center which is to be credited using the overhead cost element.

Click on

Select Double click Click on

Click on

This is just a small portion of the overhead and product costing covered to walk you throurgh. The complete set of FICO including Product costing comes in 11 power packed cds and you can grab them by clicking on the link below http://www.sap-topjobs.com/SpecialPP/8431654231.html So that’s it then my dear friends. I hope you enjoyed reading it. All our packs are shipped thru FedEx and reaches you in three days time. One more thing this configuration pack is compatible with version 4.7, version 5.0 and 6.0 So you really do have to worry about the version at all.. We have taken care of that… Also all future version changes will be provided as free updates to you. So you can sit back relax and play the music …. Get the SAP FICO Complete Configuration pack right now and the elite league of thousands of successful SAP FICO consultants. Prosperity and Success Be On To You . http://www.sap-topjobs.com/SpecialPP/8431654231.html take care and good day Vish www.sap-topjobs.com