Mikrotik 4 Wan Load Balance 3nl44
This document was ed by and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this report form. Report l4457
Overview 6h3y3j
& View Mikrotik 4 Wan Load Balance as PDF for free.
More details h6z72
- Words: 1,402
- Pages: 4
4 wan load balance « Syed Jahanzaib Personnel Blog to Share Knowledge !
Syed Jahanzaib Personnel Blog to Share Knowledge ! SEARCH MY BLOG . . .
August 29, 2011
Mikrotik 4 WAN Load Balancing using PCC with PPPoE Server / Complete Script !
Filed under: Mikrotik Related — Tags: 4 wan load balance, aacable, dual wan load balance, karachi, load balancer, mikrotik, Mikrotik PPPoE Server, pakistan, pcc, pppoe, PPPoE server, rate limit, RouterOS — Syed Jahanzaib / Pinochio~:) @ 3:29 PM
Search
CATEGORIES Forefront TMG 2010 Related (4) General IT Related (27) IBM Related (6) Linux Related (65) Microsoft Related (49) Mikrotik Related (41) Symentec SEPM Related (1) Uncategorized (1) VMware ESXi Related (2)
META Entries RSS Comments RSS WordPress.Com
EMAIL SUBSCRIPTION ENTER YOUR EMAIL ADDRESS TO SUBSCRIBE TO THIS BLOG AND RECEIVE NOTIFICATIONS OF NEW POSTS BY EMAIL. 288 OTHER FOLLOWERS
Following is a complete script for Mikrotik to combine/load balance 4 DSL lines. This server is also acting as a PPPoE Server, therefore I have made some modifications in PCC Script. For normal LB, read my article at http://aacable.wordpress.com/2011/06/04/mikrotik-4-
Sign me up!
wan-load-balance-pcc-complete-script-by-zaib/ In this example I used MikrotikT RB750 5 ports router. 4 ports were connected with four DSL Routers, and 5th port was connected with LAN. Also don’t forget to rename the interface names accordingly. This script will also add pppoe server , one pppoe , dh server, dns server and pcc. In my personnel experience , If s request are directly hitting Mikrotik configured with PCC , then you will get good load balancing. Use src-address as classifier, this way you will get rid of problems like https/broken link, streaming issues etc. Load balancing using this PCC technique (src-address) will be effective and balanced approach when more and more
http://aacable.wordpress.com/tag/4-wan-load-balance/[24/6/2012 10:46:47 μμ]
JUNE 2012 M T W T F S 4 11 18 25
5 12 19 26
6 13 20 27
7 14 21 28
1 8 15 22 29
2 9 16 23 30
S 3 10 17 24
« MAY ARCHIVES
Follow
4 wan load balance « Syed Jahanzaib Personnel Blog to Share Knowledge ! connections (from clients) that occurred. I also recommend to use SQUID proxy server along with mikrotik , either parallel or in front or backend , for better response time and it will also increase good browsing experience to s. If somehow you are not satisfied with the src-address approach,play with the PCC-Classifier, Try both addresses and ports as the classifier. While this will randomize things the most and in theory give you the most fair allocation of bandwidth, BUT there is also a good chance that it will break certain things like banking web sites and some forums. This is because often times a HTTP requests will generate several connections, so there is a chance that some requests may go out a different route than the initial one, and that will break secure web sites. For that reason I usually stick with src-address for PCC load balancing.
x-x-x-x-x-x-x-x-x-x–x-x-x-x-x-x-x-x-x-x–x-x-x-x-x-x-x-x-x-x–x-x-x-x-xx-
04 05 06 07 08 09 10 11 12
13 14 15 16 17 18 19 20 21
22 23
24 25 26 27 28 29 30 31
September 2011
August 2011followers 288 other EnterJune your email address 2011
Syed Jahanzaib
03
November 2011
Get every new post delivered October 2011 to your Inbox. July 2011
Regard’s
01 02
June 2012“Syed Follow May 2012 Jahanzaib April 2012 Personnel March 2012 Blog to February 2012 Share Knowledge January 2012 !” December 2011
April 2011 Sign October 2010
me up
September 2010
/ip address add address=172.16.0.1/16 broadcast=172.16.255.255 interface=Local network=172.16.0.0 add address=192.168.1.2/24 broadcast=192.168.1.255 interface=WAN1 network=192.168.1.0 add address=192.168.2.2/24 broadcast=192.168.2.255 interface=WAN2 network=192.168.2.0 add address=192.168.3.2/24 broadcast=192.168.3.255 interface=WAN3 network=192.168.3.0 add address=192.168.4.2/24 broadcast=192.168.4.255 interface=WAN4 network=192.168.4.0
August Powered2010 by WordPress.com
comment="" disabled=no
June 2010
comment="" disabled=no
April 2010
comment="" disabled=no comment="" disabled=no comment="" disabled=no
/ip pool add name=dh_pool1 ranges=172.16.0.70-172.16.0.254 add name=pppoe-s-pool ranges=10.0.0.1-10.0.0.255 /ip dh-server add address-pool=dh_pool1 authoritative=after-2sec-delay bootp-=static disabled=no interface=Local lease-time=12h name="My DH Server" /ip dh-server config set store-leases-disk=5m /ip dh-server network add address=172.16.0.0/16 comment="" dns-server=172.16.0.1,221.132.112.8 /interface pppoe-server server add authentication=pap default-profile=default disabled=no interface=Local keepalive-timeout=10 max-mru=1480 max-mtu=1480 max-sessions=1 mrru=disabled one-session-per-host=yes service-name=aacable /ppp profile add change-t-mss=default dns-server=172.16.0.1 localaddress=172.16.0.1 name=pppoe-profile only-one=default remote-address=pppoes-pool use-compression=default use-encryption=default use-vjcompression=default /ppp secret add caller-id=”" disabled=no limit-bytes-in=0 limit-bytes-out=0 name=zaib =1234 profile=pppoe-profile routes=”" service=pppoe /ip dns set allow-remote-requests=yes cache-max-ttl=1w cache-size=10000KiB max-udp-packet-size=512 servers=221.132.112.8,221.132.112.9 /ip firewall mangle add action=mark-connection chain=input comment="" disabled=no ininterface=WAN1 new-connection-mark=WAN1_conn through=yes add action=mark-connection chain=input comment="" disabled=no ininterface=WAN2 new-connection-mark=WAN2_conn through=yes
http://aacable.wordpress.com/tag/4-wan-load-balance/[24/6/2012 10:46:47 μμ]
May 2010 March 2010 February 2010 January 2010 December 2009 November 2009
BLOG STATS 442,406 Hits
RECENT POSTS Injecting RTL Driver In VMware ESXi 4.1 ISO Using Windows OS Windows 2003 (X86) Active Directory Migration To Windows 2008 (X64) Winmail.Dat Issue In Lotus Notes [Solved] Forefront TMG 2010 , Controlling High SQL Memory Usage ! Windows Deployment Services (WDS) / Short Reference Notes
PAGES About ME
TOP CLICKS Mikrotikrecovery.… Old-Releases.Ubuntu.Com/U… 204.62.56.64/Mikrotik/3.2… Systechblog.Com/Server-20…
TOP POSTS
4 wan load balance « Syed Jahanzaib Personnel Blog to Share Knowledge ! 32 33 34 35 36 37 38 39 40 41 42 43 44 45
46 47
48 49
50 51
52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68
add action=mark-connection chain=input comment="" disabled=no ininterface=WAN3 new-connection-mark=WAN3_conn through=yes add action=mark-connection chain=input comment="" disabled=no ininterface=WAN4 new-connection-mark=WAN4_conn through=yes add action=mark-routing chain=output comment="" connection-mark=WAN1_conn disabled=no new-routing-mark=to_WAN1 through=yes add action=mark-routing chain=output comment="" connection-mark=WAN2_conn disabled=no new-routing-mark=to_WAN2 through=yes add action=mark-routing chain=output comment="" connection-mark=WAN3_conn disabled=no new-routing-mark=to_WAN3 through=yes add action=mark-routing chain=output comment="" connection-mark=WAN4_conn disabled=no new-routing-mark=to_WAN4 through=yes add action=accept chain=prerouting comment="" disabled=no dstaddress=192.168.1.0/24 add action=accept chain=prerouting comment="" disabled=no dstaddress=192.168.2.0/24 add action=accept chain=prerouting comment="" disabled=no dstaddress=192.168.3.0/24 add action=accept chain=prerouting comment="" disabled=no dstaddress=192.168.4.0/24 add action=mark-connection chain=prerouting comment="" disabled=no dstaddress-type=!local new-connection-mark=WAN1_conn through=yes perconnection-classifier=both-addresses-and-ports:4/0 src-address=10.0.0.110.0.0.255 add action=mark-connection chain=prerouting comment="" disabled=no dstaddress-type=!local new-connection-mark=WAN2_conn through=yes perconnection-classifier=both-addresses-and-ports:4/1 src-address=10.0.0.110.0.0.255 add action=mark-connection chain=prerouting comment="" disabled=no dstaddress-type=!local new-connection-mark=WAN3_conn through=yes perconnection-classifier=both-addresses-and-ports:4/2 src-address=10.0.0.110.0.0.255 add action=mark-connection chain=prerouting comment="" disabled=no dstaddress-type=!local new-connection-mark=WAN4_conn through=yes perconnection-classifier=both-addresses-and-ports:4/3 src-address=10.0.0.110.0.0.255 add action=mark-routing chain=prerouting comment="" connection-mark=WAN1_conn disabled=no new-routing-mark=to_WAN1 through=yes add action=mark-routing chain=prerouting comment="" connection-mark=WAN2_conn disabled=no new-routing-mark=to_WAN2 through=yes add action=mark-routing chain=prerouting comment="" connection-mark=WAN3_conn disabled=no new-routing-mark=to_WAN3 through=yes add action=mark-routing chain=prerouting comment="" connection-mark=WAN4_conn disabled=no new-routing-mark=to_WAN4 through=yes /ip firewall nat add action=masquerade chain=srcnat src-address=10.0.0.1-10.0.0.255 add action=masquerade chain=srcnat src-address=10.0.0.1-10.0.0.255 add action=masquerade chain=srcnat src-address=10.0.0.1-10.0.0.255 add action=masquerade chain=srcnat src-address=10.0.0.1-10.0.0.255
comment="" disabled=no out-interface=WAN1 comment="" disabled=no out-interface=WAN2 comment="" disabled=no out-interface=WAN3 comment="" disabled=no out-interface=WAN4
/ip route add check-gateway=ping disabled=no distance=1 dst-address=0.0.0.0/0 gateway=192.168.1.1 routing-mark=to_WAN1 scope=30 target-scope=10 add check-gateway=ping disabled=no distance=2 dst-address=0.0.0.0/0 gateway=192.168.2.1 routing-mark=to_WAN2 scope=30 target-scope=10
http://aacable.wordpress.com/tag/4-wan-load-balance/[24/6/2012 10:46:47 μμ]
Youtube Caching Problem : An Error Occured. Please Try Again Later. [SOLVED] Updated Storeurl.Pl Howto Cache Youtube With SQUID / LUSCA And By Cached Videos From Mikrotik Queue Technical Interview Questions (Part 2/3) ACTIVE DIRECTORY] Howto Crack Mikrotik 3.30 [P.C.C ED VER] [For Educational Purpose Only] Youtube Caching With SQUID 2.7 [Using Storeurl.Pl]
RSS RSS - Posts RSS - Comments
4 wan load balance « Syed Jahanzaib Personnel Blog to Share Knowledge ! 69 70 71 72 73 74 75 76 77 78 79
add check-gateway=ping disabled=no distance=3 dst-address=0.0.0.0/0 gateway=192.168.3.1 routing-mark=to_WAN3 scope=30 target-scope=10 add check-gateway=ping disabled=no distance=4 dst-address=0.0.0.0/0 gateway=192.168.4.1 routing-mark=to_WAN4 scope=30 target-scope=10 add check-gateway=ping disabled=no distance=1 dst-address=0.0.0.0/0 gateway=192.168.1.1 scope=30 target-scope=10 add check-gateway=ping comment="" disabled=no distance=2 dst-address=0.0.0.0/0 gateway=192.168.2.1 scope=30 target-scope=10 add check-gateway=ping comment="" disabled=no distance=3 dst-address=0.0.0.0/0 gateway=192.168.3.1 scope=30 target-scope=10 add check-gateway=ping comment="" disabled=no distance=4 dst-address=0.0.0.0/0 gateway=192.168.4.1 scope=30 target-scope=10
All Done ! Now Test the link by putting load, the more multiple s load you put on it, the better Load Balance result you will get
PCC WITH HOTSPOT If you wanna run PCC with HOTSPOT on same Mikrotik Server, Put this rule in place to stop the hotspot from processing people after they have signed into the network. 1
/ip firewall nat add action=accept chain=pre-hotspot disabled=no dst-addresstype=!local hotspot=auth
PCC WITH UN-EQUAL WAN LINKS If you have Un-Equal WAN Links, for example WAN,1,2,3 are of 4MB and WAN,4 is of 8 Mb, and you want to force MT to use WAN4 link more then other because of its capacity, Then you have to Add more PCC rules asg the same two marks to a specific link i.e WAN4 , something like Code: 1
2
3
4
5
add chain=prerouting dst-address-type=!local in-interface=Local perconnection-classifier=both-addresses-and-ports:4/0 action=mark-connection connection-mark=WAN1_conn through=yes add chain=prerouting dst-address-type=!local in-interface=Local perconnection-classifier=both-addresses-and-ports:4/1 action=mark-connection connection-mark=WAN2_conn through=yes add chain=prerouting dst-address-type=!local in-interface=Local perconnection-classifier=both-addresses-and-ports:4/2 action=mark-connection connection-mark=WAN3_conn through=yes add chain=prerouting dst-address-type=!local in-interface=Local perconnection-classifier=both-addresses-and-ports:4/3 action=mark-connection connection-mark=WAN4_conn through=yes add chain=prerouting dst-address-type=!local in-interface=Local perconnection-classifier=both-addresses-and-ports:4/4 action=mark-connection connection-mark=WAN4_conn through=yes
new-
new-
new-
new-
new-
ZaiB Comments (54) Theme: Silver is the New Black. Blog at WordPress.com.
http://aacable.wordpress.com/tag/4-wan-load-balance/[24/6/2012 10:46:47 μμ]
Syed Jahanzaib Personnel Blog to Share Knowledge ! SEARCH MY BLOG . . .
August 29, 2011
Mikrotik 4 WAN Load Balancing using PCC with PPPoE Server / Complete Script !
Filed under: Mikrotik Related — Tags: 4 wan load balance, aacable, dual wan load balance, karachi, load balancer, mikrotik, Mikrotik PPPoE Server, pakistan, pcc, pppoe, PPPoE server, rate limit, RouterOS — Syed Jahanzaib / Pinochio~:) @ 3:29 PM
Search
CATEGORIES Forefront TMG 2010 Related (4) General IT Related (27) IBM Related (6) Linux Related (65) Microsoft Related (49) Mikrotik Related (41) Symentec SEPM Related (1) Uncategorized (1) VMware ESXi Related (2)
META Entries RSS Comments RSS WordPress.Com
EMAIL SUBSCRIPTION ENTER YOUR EMAIL ADDRESS TO SUBSCRIBE TO THIS BLOG AND RECEIVE NOTIFICATIONS OF NEW POSTS BY EMAIL. 288 OTHER FOLLOWERS
Following is a complete script for Mikrotik to combine/load balance 4 DSL lines. This server is also acting as a PPPoE Server, therefore I have made some modifications in PCC Script. For normal LB, read my article at http://aacable.wordpress.com/2011/06/04/mikrotik-4-
Sign me up!
wan-load-balance-pcc-complete-script-by-zaib/ In this example I used MikrotikT RB750 5 ports router. 4 ports were connected with four DSL Routers, and 5th port was connected with LAN. Also don’t forget to rename the interface names accordingly. This script will also add pppoe server , one pppoe , dh server, dns server and pcc. In my personnel experience , If s request are directly hitting Mikrotik configured with PCC , then you will get good load balancing. Use src-address as classifier, this way you will get rid of problems like https/broken link, streaming issues etc. Load balancing using this PCC technique (src-address) will be effective and balanced approach when more and more
http://aacable.wordpress.com/tag/4-wan-load-balance/[24/6/2012 10:46:47 μμ]
JUNE 2012 M T W T F S 4 11 18 25
5 12 19 26
6 13 20 27
7 14 21 28
1 8 15 22 29
2 9 16 23 30
S 3 10 17 24
« MAY ARCHIVES
Follow
4 wan load balance « Syed Jahanzaib Personnel Blog to Share Knowledge ! connections (from clients) that occurred. I also recommend to use SQUID proxy server along with mikrotik , either parallel or in front or backend , for better response time and it will also increase good browsing experience to s. If somehow you are not satisfied with the src-address approach,play with the PCC-Classifier, Try both addresses and ports as the classifier. While this will randomize things the most and in theory give you the most fair allocation of bandwidth, BUT there is also a good chance that it will break certain things like banking web sites and some forums. This is because often times a HTTP requests will generate several connections, so there is a chance that some requests may go out a different route than the initial one, and that will break secure web sites. For that reason I usually stick with src-address for PCC load balancing.
x-x-x-x-x-x-x-x-x-x–x-x-x-x-x-x-x-x-x-x–x-x-x-x-x-x-x-x-x-x–x-x-x-x-xx-
04 05 06 07 08 09 10 11 12
13 14 15 16 17 18 19 20 21
22 23
24 25 26 27 28 29 30 31
September 2011
August 2011followers 288 other EnterJune your email address 2011
Syed Jahanzaib
03
November 2011
Get every new post delivered October 2011 to your Inbox. July 2011
Regard’s
01 02
June 2012“Syed Follow May 2012 Jahanzaib April 2012 Personnel March 2012 Blog to February 2012 Share Knowledge January 2012 !” December 2011
April 2011 Sign October 2010
me up
September 2010
/ip address add address=172.16.0.1/16 broadcast=172.16.255.255 interface=Local network=172.16.0.0 add address=192.168.1.2/24 broadcast=192.168.1.255 interface=WAN1 network=192.168.1.0 add address=192.168.2.2/24 broadcast=192.168.2.255 interface=WAN2 network=192.168.2.0 add address=192.168.3.2/24 broadcast=192.168.3.255 interface=WAN3 network=192.168.3.0 add address=192.168.4.2/24 broadcast=192.168.4.255 interface=WAN4 network=192.168.4.0
August Powered2010 by WordPress.com
comment="" disabled=no
June 2010
comment="" disabled=no
April 2010
comment="" disabled=no comment="" disabled=no comment="" disabled=no
/ip pool add name=dh_pool1 ranges=172.16.0.70-172.16.0.254 add name=pppoe-s-pool ranges=10.0.0.1-10.0.0.255 /ip dh-server add address-pool=dh_pool1 authoritative=after-2sec-delay bootp-=static disabled=no interface=Local lease-time=12h name="My DH Server" /ip dh-server config set store-leases-disk=5m /ip dh-server network add address=172.16.0.0/16 comment="" dns-server=172.16.0.1,221.132.112.8 /interface pppoe-server server add authentication=pap default-profile=default disabled=no interface=Local keepalive-timeout=10 max-mru=1480 max-mtu=1480 max-sessions=1 mrru=disabled one-session-per-host=yes service-name=aacable /ppp profile add change-t-mss=default dns-server=172.16.0.1 localaddress=172.16.0.1 name=pppoe-profile only-one=default remote-address=pppoes-pool use-compression=default use-encryption=default use-vjcompression=default /ppp secret add caller-id=”" disabled=no limit-bytes-in=0 limit-bytes-out=0 name=zaib =1234 profile=pppoe-profile routes=”" service=pppoe /ip dns set allow-remote-requests=yes cache-max-ttl=1w cache-size=10000KiB max-udp-packet-size=512 servers=221.132.112.8,221.132.112.9 /ip firewall mangle add action=mark-connection chain=input comment="" disabled=no ininterface=WAN1 new-connection-mark=WAN1_conn through=yes add action=mark-connection chain=input comment="" disabled=no ininterface=WAN2 new-connection-mark=WAN2_conn through=yes
http://aacable.wordpress.com/tag/4-wan-load-balance/[24/6/2012 10:46:47 μμ]
May 2010 March 2010 February 2010 January 2010 December 2009 November 2009
BLOG STATS 442,406 Hits
RECENT POSTS Injecting RTL Driver In VMware ESXi 4.1 ISO Using Windows OS Windows 2003 (X86) Active Directory Migration To Windows 2008 (X64) Winmail.Dat Issue In Lotus Notes [Solved] Forefront TMG 2010 , Controlling High SQL Memory Usage ! Windows Deployment Services (WDS) / Short Reference Notes
PAGES About ME
TOP CLICKS Mikrotikrecovery.… Old-Releases.Ubuntu.Com/U… 204.62.56.64/Mikrotik/3.2… Systechblog.Com/Server-20…
TOP POSTS
4 wan load balance « Syed Jahanzaib Personnel Blog to Share Knowledge ! 32 33 34 35 36 37 38 39 40 41 42 43 44 45
46 47
48 49
50 51
52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68
add action=mark-connection chain=input comment="" disabled=no ininterface=WAN3 new-connection-mark=WAN3_conn through=yes add action=mark-connection chain=input comment="" disabled=no ininterface=WAN4 new-connection-mark=WAN4_conn through=yes add action=mark-routing chain=output comment="" connection-mark=WAN1_conn disabled=no new-routing-mark=to_WAN1 through=yes add action=mark-routing chain=output comment="" connection-mark=WAN2_conn disabled=no new-routing-mark=to_WAN2 through=yes add action=mark-routing chain=output comment="" connection-mark=WAN3_conn disabled=no new-routing-mark=to_WAN3 through=yes add action=mark-routing chain=output comment="" connection-mark=WAN4_conn disabled=no new-routing-mark=to_WAN4 through=yes add action=accept chain=prerouting comment="" disabled=no dstaddress=192.168.1.0/24 add action=accept chain=prerouting comment="" disabled=no dstaddress=192.168.2.0/24 add action=accept chain=prerouting comment="" disabled=no dstaddress=192.168.3.0/24 add action=accept chain=prerouting comment="" disabled=no dstaddress=192.168.4.0/24 add action=mark-connection chain=prerouting comment="" disabled=no dstaddress-type=!local new-connection-mark=WAN1_conn through=yes perconnection-classifier=both-addresses-and-ports:4/0 src-address=10.0.0.110.0.0.255 add action=mark-connection chain=prerouting comment="" disabled=no dstaddress-type=!local new-connection-mark=WAN2_conn through=yes perconnection-classifier=both-addresses-and-ports:4/1 src-address=10.0.0.110.0.0.255 add action=mark-connection chain=prerouting comment="" disabled=no dstaddress-type=!local new-connection-mark=WAN3_conn through=yes perconnection-classifier=both-addresses-and-ports:4/2 src-address=10.0.0.110.0.0.255 add action=mark-connection chain=prerouting comment="" disabled=no dstaddress-type=!local new-connection-mark=WAN4_conn through=yes perconnection-classifier=both-addresses-and-ports:4/3 src-address=10.0.0.110.0.0.255 add action=mark-routing chain=prerouting comment="" connection-mark=WAN1_conn disabled=no new-routing-mark=to_WAN1 through=yes add action=mark-routing chain=prerouting comment="" connection-mark=WAN2_conn disabled=no new-routing-mark=to_WAN2 through=yes add action=mark-routing chain=prerouting comment="" connection-mark=WAN3_conn disabled=no new-routing-mark=to_WAN3 through=yes add action=mark-routing chain=prerouting comment="" connection-mark=WAN4_conn disabled=no new-routing-mark=to_WAN4 through=yes /ip firewall nat add action=masquerade chain=srcnat src-address=10.0.0.1-10.0.0.255 add action=masquerade chain=srcnat src-address=10.0.0.1-10.0.0.255 add action=masquerade chain=srcnat src-address=10.0.0.1-10.0.0.255 add action=masquerade chain=srcnat src-address=10.0.0.1-10.0.0.255
comment="" disabled=no out-interface=WAN1 comment="" disabled=no out-interface=WAN2 comment="" disabled=no out-interface=WAN3 comment="" disabled=no out-interface=WAN4
/ip route add check-gateway=ping disabled=no distance=1 dst-address=0.0.0.0/0 gateway=192.168.1.1 routing-mark=to_WAN1 scope=30 target-scope=10 add check-gateway=ping disabled=no distance=2 dst-address=0.0.0.0/0 gateway=192.168.2.1 routing-mark=to_WAN2 scope=30 target-scope=10
http://aacable.wordpress.com/tag/4-wan-load-balance/[24/6/2012 10:46:47 μμ]
Youtube Caching Problem : An Error Occured. Please Try Again Later. [SOLVED] Updated Storeurl.Pl Howto Cache Youtube With SQUID / LUSCA And By Cached Videos From Mikrotik Queue Technical Interview Questions (Part 2/3) ACTIVE DIRECTORY] Howto Crack Mikrotik 3.30 [P.C.C ED VER] [For Educational Purpose Only] Youtube Caching With SQUID 2.7 [Using Storeurl.Pl]
RSS RSS - Posts RSS - Comments
4 wan load balance « Syed Jahanzaib Personnel Blog to Share Knowledge ! 69 70 71 72 73 74 75 76 77 78 79
add check-gateway=ping disabled=no distance=3 dst-address=0.0.0.0/0 gateway=192.168.3.1 routing-mark=to_WAN3 scope=30 target-scope=10 add check-gateway=ping disabled=no distance=4 dst-address=0.0.0.0/0 gateway=192.168.4.1 routing-mark=to_WAN4 scope=30 target-scope=10 add check-gateway=ping disabled=no distance=1 dst-address=0.0.0.0/0 gateway=192.168.1.1 scope=30 target-scope=10 add check-gateway=ping comment="" disabled=no distance=2 dst-address=0.0.0.0/0 gateway=192.168.2.1 scope=30 target-scope=10 add check-gateway=ping comment="" disabled=no distance=3 dst-address=0.0.0.0/0 gateway=192.168.3.1 scope=30 target-scope=10 add check-gateway=ping comment="" disabled=no distance=4 dst-address=0.0.0.0/0 gateway=192.168.4.1 scope=30 target-scope=10
All Done ! Now Test the link by putting load, the more multiple s load you put on it, the better Load Balance result you will get
PCC WITH HOTSPOT If you wanna run PCC with HOTSPOT on same Mikrotik Server, Put this rule in place to stop the hotspot from processing people after they have signed into the network. 1
/ip firewall nat add action=accept chain=pre-hotspot disabled=no dst-addresstype=!local hotspot=auth
PCC WITH UN-EQUAL WAN LINKS If you have Un-Equal WAN Links, for example WAN,1,2,3 are of 4MB and WAN,4 is of 8 Mb, and you want to force MT to use WAN4 link more then other because of its capacity, Then you have to Add more PCC rules asg the same two marks to a specific link i.e WAN4 , something like Code: 1
2
3
4
5
add chain=prerouting dst-address-type=!local in-interface=Local perconnection-classifier=both-addresses-and-ports:4/0 action=mark-connection connection-mark=WAN1_conn through=yes add chain=prerouting dst-address-type=!local in-interface=Local perconnection-classifier=both-addresses-and-ports:4/1 action=mark-connection connection-mark=WAN2_conn through=yes add chain=prerouting dst-address-type=!local in-interface=Local perconnection-classifier=both-addresses-and-ports:4/2 action=mark-connection connection-mark=WAN3_conn through=yes add chain=prerouting dst-address-type=!local in-interface=Local perconnection-classifier=both-addresses-and-ports:4/3 action=mark-connection connection-mark=WAN4_conn through=yes add chain=prerouting dst-address-type=!local in-interface=Local perconnection-classifier=both-addresses-and-ports:4/4 action=mark-connection connection-mark=WAN4_conn through=yes
new-
new-
new-
new-
new-
ZaiB Comments (54) Theme: Silver is the New Black. Blog at WordPress.com.
http://aacable.wordpress.com/tag/4-wan-load-balance/[24/6/2012 10:46:47 μμ]
Related Documents 543cg
Mikrotik 4 Wan Load Balance 3nl44
December 2019 178
Load Balance Mikrotik 5z1u2x
May 2020 5
3 Wan Load Balancing Script Mikrotik 49606s
October 2019 126
Mikrotik 4 Wan Load Balancing Using Pcc Method 2f1p1q
November 2019 115
Mikrotik Dual Wan Load Balancing Using Pcc Method 51234k
December 2019 125