ENSOFT, INC. engineering software
Phone: 512-244-6464 Fax: 512-244-6067 E-Mail:
[email protected]
3003 West Howard Lane Austin, Texas 78728
www.ensoftinc.com
LPI LE v 6 . 0
A Program for the Analysis & Design of Piles and Drilled Shafts Under Lateral Loads GENERAL DESCRIPTION
LPILE is a special-purpose program based on rational procedures for analyzing a pile under lateral loading using the p-y method. LPILE solves the differential equation for a beamcolumn using nonlinear lateral load-transfer (p-y) curves. The program computes deflection, bending moment, shear force and soil response over the length of the pile. As an option, components of the stiffness matrix at the pile head may be computed internally by LPILE so s can incorporate basic soil-structure interaction in their super-structure analyses. Another option from LPILE provides graphs of pilehead deflections for various pile lengths, to help s with optimum pile penetrations (for lateral response). Nonlinear lateral load-transfer from the foundation to the soil is modeled using p-y curves generated internally using published recommendations for various types of soils. Special procedures are programmed for computing p-y curves for layered soils and for rocks. Alternatively, the can enter manually any other externally generated p-y curves. Five types of pile-head boundary conditions may be selected, and the structural properties of the pile can vary as a function of depth. LPILE has analytical features to compute the nonlinear momentcurvature relationships and nominal moment capacity of a pile’s section based on specified pile dimensions and nonlinear material properties. Optionally, the may enter nonlinear moment-
curvature relationships to be used in place of the internally-generated values. LPILE provides several design recommendations for rebar arrangements in drilled shafts. LPILE has been written as a 32-bit application that uses 64bit precision in computations. The program produces plain-text input files and output reports. A number of graphs can be generated by the program and be saved in several graphics formats for inclusion in project reports. LPILE runs under all versions of Microsoft Windows© from Windows XP through Windows 7 (32 and 64 bit versions).
New data input for drilled shafts
LIST OF FEATURES Boundary Conditions and Loading • Five sets of boundary conditions are available to model the pile head: free head, pinned head with sway, fixed head with sway, or elastically-restrained with a rotational spring. Depending on boundary conditions, pile-head loading may consist of a lateral load, a bending moment, a specific lateral displacement, or a specific pile-head rotation. The ability to specify both deflection and rotation at the pile head is an useful feature available in LPILE. • Up to fifty different load cases may be applied at the pile head in a single analytical run. This is a helpful feature for the quick observation of pile behavior for a specified range of external loads. • s can specify any of the applied loads to be used for computations of pile-head deflection vs pile penetration to check critical pile length and produce efficient penetration designs. • A set of distributed lateral loading may be applied anywhere along the length of the pile. Loading may be specified as constant or varying linearly with depth.
LRFD Analyses • LPILE v6 introduces the capability of performing analyses for Load and Resistance Factor Design (LRFD). • Up to fifty load-case combinations may be defined with up to 100 unfactored loads grouped in 13 pre-defined load types. • Load-case combinations are defined by entering the load factors for each load type and the resistance factors for both flexure and shear. Optionally, the may enter the load case combinations by reading external text files (previously created by the ). • Unfactored loads are defined for: shear, moment, axial thrust, and distributed lateral load. • Load types for unfactored loads are: dead load, live, earthquake, impact, wind, water, ice, horizontal soil pressure, live roof, rain, snow, temperature plus two -defined load types. • Factored loads are computed for each load-case combination by multiplying the appropriate load factor by the sum of loads of the same type. Summary reports of the computed load-case combinations are generated by the program.
LPI LE v 6 . 0
LIST OF FEATURES (cont.)
Generation of Lateral Load-Transfer (p-y) Curves • Soil-resistance (p-y) curves can be internally generated by the program for the following soils: soft clay, stiff clay with or without free water, sand (Reese et al), sand (API), cemented c-φ soils (silt), liquefiable sand, strong rock, weak rock, stiff clay without free water using initial k, Piedmont Residual Soils, Loess Silt, and Elastic Subgrade. The p-y curves may be printed at any depth for reviews or reference. • s may optionally input their own lateral load-transfer (p-y) curves for specified soil layers. • LPILE can adjust p-y curves for soil-layering effects (for example, where there may be layers of sand and clay). • -defined multipliers are provided to increase or reduce the soil resistance (p-y) curves at any points along the length of the pile. This feature is used in seismic conditions to reduce the response of liquefied layers or to for Group Effects. • Internal modification factors are automatically calculated to model pile batter and sloping ground surfaces. • An -specified curve may be used to model the additional shear resistance provided by the soil at the base of largediameter drilled shafts and/or short piles. • LPILE has the capability of analyzing the behavior of piles subjected to the free-field soil movement in the lateral direction. Structural Features • Linear interpolation of bending stiffness is possible for piles with varying cross sections. • The may optionally ask the program to generate and take into nonlinear values of flexural stiffness (EI). These values are generated internally by the program based on: cracked/uncracked concrete behavior, -specified pile dimensions, and nonlinear material properties. • Version 6 allows the to define up to 10 sections with nonlinear bending properties. This permits the designer to cut off part of the reinforcing steel from the lower sections of a drilled shaft, as is common construction practice. • Four values (K22, K23, K32, and K33) of a typical 6x6 matrix for foundation stiffness may be generated by the program for a range of loading. These values can be used to model nonlinear foundation springs in the analysis of the superstructure. • LPILE has the capability to perform push-over analyses and can study the pile behavior after the development of plastic hinges (yielding). • A new feature in Version 6 is the power to automatically generate bundled bar arrangement for 2-bar and 3-bar bundles. • Also new in Version 6 is the ability to offset the reinforcing steel from the centroid. This option was provided to allow analysis of drilled shafts where the reinforcement was placed (or accidentally moved) off-center. Features for Optimization of Pile Designs • Several pile lengths can be automatically checked by the LPILE program in order to help the produce a design
with an optimum pile penetration. For this purpose, s can evaluate the curve of pile-head deflections vs pile length. • Curves of flexural stiffness versus bending moment and/or moment versus curvature are provided to review the adequacy of the pile's section. In addition, the may also observe the interaction diagram of the modeled pile section. • The may also observe the nonlinear values of the foundation stiffness matrix or the curve of pile-head deflections versus pile length.
Custom charts for shear force and moment Functional Features • Soil-layer data structures and input screens are improved to help the enter data conveniently with defaulted values provided. Hints and notes were also introduced on input windows to assist the for data entry. • Over 100 error-checking messages have been provided, making it simpler for occasional s to run the program and/or to debug run-time errors of more experienced s. • The Graphics menu can produce quick displays of all results contained in the output file, including: pile deflection, bending moment, shear and soil resistance versus pile depth. A customcontrol chart can be used to prepare various engineering plots in high quality for presentation and reporting. • Standard Windows operations, such as dialog boxes, speed buttons, grid cells, clickable buttons, drop-down list of options, and pull-down menu choices are all incorporated in the LPILE program. • A well-documented Technical Manual is provided with relevant theoretical equations. The Technical and 's manuals are now distributed in electronic form with the LPILE program. Software Free technical and maintenance plus software upgrades are included for a period of one year from software purchase or upgrade.