Iso Standards Handbook 2xc2u

ISO Standards Handbook:

Fasteners and screw threads Volume 1:

Terminology and nomenclature, General reference standards

2001, Ed. 5, 808 p., ISBN 92-67-10344-X

Contents Part 1 : Terminology and nomenclature ISO 1891:1979

Bolts, screws, nuts and accessories — Terminology and nomenclature

ISO 5408:1983

Cylindrical screw threads — Vocabulary

Part 2 : General reference standards 2.1 ISO metric screw threads ISO 68-1:1998

ISO general purpose screw threads — Part 1: Basic profile

ISO 261:1998

ISO general purpose metric screw threads — General plan

ISO 262:1998

ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts

ISO 724:1993

ISO general-purpose metric screw threads — Basic dimensions

ISO 965-1:1998

ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data

ISO 965-2:1998

ISO general purpose metric screw threads — Tolerances — Part 2: Limits of sizes for general purpose external and internal screw threads — Medium quality

ISO 965-3:1998

ISO general purpose metric screw threads — Tolerances — Part 3: Deviations for constructional threads

ISO 965-4:1998

ISO general purpose metric screw threads — Tolerances — Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing

ISO 965-5:1998

ISO general purpose metric screw threads — Tolerances — Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing

ISO 1502:1996

ISO general-purpose metric screw threads — Gauges and gauging

2.2 Technical drawings for screw threads and threaded parts ISO 5845-1:1995

Technical drawings — Simplified representation of the assembly of parts with fasteners — Part 1: General principles

Fasteners and screw threads, Ed. 5, Vol. 1

Page 1 of 3

ISO 6410-1:1993

Technical drawings — Screw threads and threaded parts — Part 1: General conventions

ISO 6410-2:1993

Technical drawings — Screw threads and threaded parts — Part 2: Screw thread inserts

ISO 6410-3:1993

Technical drawings — Screw threads and threaded parts — Part 3: Simplified representation

2.3 Special screw threads ISO 1478:1983

Tapping screws thread

2.4 Variations of forms, dimensions and designation ISO 225:1983

Fasteners — Bolts, screws, studs and nuts — Symbols and designations of dimensions

ISO 272:1982

Fasteners — Hexagon products — Widths across flats

ISO 273:1979

Fasteners — Clearance holes for bolts and screws

ISO 885:2000

General purpose bolts and screws — Metric series — Radii under the head

ISO 888:1976

Bolts, screws and studs — Nominal lengths, and thread lengths for general purpose bolts

ISO 3508:1976

Thread run-outs for fasteners with thread in accordance with ISO 261 and ISO 262

ISO 4753:1999

Fasteners — Ends of parts with external metric ISO thread

ISO 4755:1983

Fasteners — Thread undercuts for external metric ISO threads

ISO 4757:1983

Cross recesses for screws

ISO 7378:1983

Fasteners — Bolts, screws and studs — Split pin holes and wire holes

ISO 7721:1983

Countersunk head screws — Head configuration and gauging

ISO 7721-2:1990

Countersunk flat head screws — Part 2: Penetration depth of cross recesses

ISO 8991:1986

Designation system for fasteners

ISO 10664:1999

Hexalobular internal driving feature for bolts and screws

2.5 Tolerances of fasteners ISO 4759-1:2000

Tolerances for fasteners — Part 1: Bolts, screws, studs and nuts — Product grades A, B and C

ISO 4759-3:2000

Tolerances for fasteners — Part 3: Plain washers for bolts, screws and nuts — Product grades A and C

2.6 General requirements and mechanical properties of fasteners ISO 898-1:1999

Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs

ISO 898-2:1992

Mechanical properties of fasteners — Part 2: Nuts with specified proof load values — Coarse thread

Fasteners and screw threads, Ed. 5, Vol. 1

Page 2 of 3

ISO 898-5:1998

Mechanical properties of fasteners made of carbon steel and alloy steel — Part 5: Set screws and similar threaded fasteners not under tensile stresses

ISO 898-6:1994

Mechanical properties of fasteners — Part 6: Nuts with specified proof load values — Fine pitch thread

ISO 898-7:1992

Mechanical properties of fasteners — Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm

ISO 2320:1997

Prevailing torque type steel hexagon nuts — Mechanical and performance properties

ISO 2702:1992

Heat-treated steel tapping screws — Mechanical properties

ISO 3506-1:1997

Mechanical properties of corrosion-resistant stainless-steel fasteners — Part 1: Bolts, screws and studs

ISO 3506-2:1997

Mechanical properties of corrosion-resistant stainless-steel fasteners — Part 2 : Nuts

ISO 3506-3:1997

Mechanical properties of corrosion-resistant stainless steel fasteners — Part 3: Set screws and similar fasteners not under tensile stress

ISO 4042:1999

Fasteners — Electroplated coatings

ISO 6157-1:1988

Fasteners — Surface discontinuities — Part 1: Bolts, screws and studs for general requirements

ISO 6157-2:1995

Fasteners — Surface discontinuities — Part 2: Nuts

ISO 6157-3:1988

Fasteners — Surface discontinuities — Part 3: Bolts, screws and studs for special requirements

ISO 7085:1999

Mechanical and performance requirements of case hardened and tempered metric thread rolling screws

ISO 8839:1986

Mechanical properties of fasteners — Bolts, screws, studs and nuts made of non-ferrous metals

ISO 8992:1986

Fasteners — General requirements for bolts, screws, studs and nuts

ISO 10666:1999

Drilling screws with tapping screw thread — Mechanical and functional properties

ISO 10683:2000

Fasteners — Non-electrolytically applied zinc flake coatings

2.7 Testing and acceptance inspection ISO 3269:2000

Fasteners — Acceptance inspection

ISO 3800:1993

Threaded fasteners — Axial load fatigue testing — Test methods and evaluation of results

ISO 8749:1986

Pins and grooved pins — Shear test

ISO 10484:1997

Widening test on nuts

ISO 10485:1991

Cone proof load test on nuts

ISO 15330:1999

Fasteners — Preloading test for the detection of hydrogen embrittlement — Parallel bearing surface method

Fasteners and screw threads, Ed. 5, Vol. 1

Page 3 of 3