Indian Ordnance Factory Recruitment 2017 2018f

Page 1 of 46

GOVERNMENT OF INDIA MINISTRY OF DEFENCE ORDNANCE FACTORY BOARD ORDNANCE FACTORY RECRUITMENT CENTRE ment No: 10201/11/0209/1718

The following amendments may kindly be noted by all prospective applicants against OFRC/OFB ment No: 10201/11/0209/1718 Start Date of submission of on-line application : Last Date of submission of on-line application :

FOR 29.05.2017

READ 19.06.2017

19.06.2017

10.07.2017

All relevant dates also stand modified in this ment accordingly. Further, please also note that all the vacancies of Vehicle Factory, Jabalpur (VFJ), MP and Gun Carriage Factory (GCF), Jabalpur, MP stand withdrawn.

ment for the Post of IEs (Adv No. 10201/11/0209/1718)

Page 2 of 46

GOVERNMENT OF INDIA MINISTRY OF DEFENCE ORDNANCE FACTORY BOARD ORDNANCE FACTORY RECRUITMENT CENTRE ment No: 10201/11/0209/1718

Ordnance Factory Board is a bicentenary Government organization with 41 factories spread throughout Indiawith State of Art defence production technology in diverse fields and 22 others establishments for Training, Safety, R&D, Recruitment etc. Ordnance Factory Recruitment Centre, on behalf of all the Ordnance Factories invites ONLINE applications from eligible citizens of India for filling up vacancies/posts of Semi-Skilled grade Industrial Employees (IEs) Group 'C' in different trades and Labour Group 'C' in various Ordnance Factories located across India. Eligible and interested citizens of India, willing to contribute to National Defence Production and defence preparedness of the countryare invited to apply ONLINEthrough the following OFB link: www.ofb.gov.in. NOTE: Ex-Trade Apprentices of Ordnance Factories and candidates who have ed with employment exchange are also required to apply online through the OFB link given above. There is no exception available and all the applicants are required to apply ONLINE necessarily. Manual application/Hard Copy of applications is not allowed and will not be entertained. 1. IMPORTANT DATES:

Start Date of submission of on-line application :

19.06.2017

Last Date of submission of on-line application :

10.07.2017

2. NAME OF THE POST AND PAY SCALE:

Name of the Post

Industrial Employees(Semi-Skilled) & Labour Group 'C'

Pay Band

Pay Band-1 (Rs.5200-20200), Grade Pay Rs. 1800 (pre-revised), Entry Level Pay in 7th C 18000 Allowances as issible to the Central Government employees from time to time.

Other Allowances

3. VACANCY POSTIONS:Factory-wise/Trade-wise details of vacancies along with Category-wise breakup are enclosed at Annexure-‘A’. The d number of vacancies and trades are subject to variation, at any point of time.


Page 3 of 46

4. ELIGIBILITY CRITERIA: NOTE: CANDIDATES TO ENSURE THEIR ELIGIBILITY FOR THE EXAMINATION. The Candidates applying for the aforementioned vacancies should ensure that they fulfil all eligibility conditions for the post/trade applied for. Their ission to all the stages of the selection procedure will be purely provisional subject to satisfying the prescribed eligibility conditions. Mere issue of itcard to the candidate for the written examinationwill not imply that his/her candidature has been finally accepted by OFRC/OFB. Verification of eligibility conditions with reference to original documents will be done only at the time of trade test in the respective factories. 4.1 AGE LIMIT:18 to 32 year (Minimum Age 18 year for all categories) as on the closing date of online applications. Permissible relaxation of upper age limit for different categories is as given: S. NO 1. 2.

CATEGORY

AGE RELAXATION AFTER UPPER AGE LIMIT OBC (Non Creamy Layer) SC/ST UR

3.

Ex-Trade Apprentice of Ordnance Factories

OBC (NCL)

SC/ST

UR

4.

Ex-Servicemen

OBC (NCL)

SC/ST

5.

6.

7. 8.

3 years 5 years up to the Period of Apprentice Training undergone By The Candidate Under Apprenticeship Act 1961 3 years + upto the Period of Apprentice Training undergone by The Candidate Under Apprenticeship Act 1961 5 years + up to the Period of Apprentice Training Undergone by The Candidate Under Apprenticeship Act 1961 03 years in addition to the period of service rendered in the defence services as on the closing date. 06 years (3 years + 3 years) in addition to the period of service rendered in the defence services as on the closing date. 08 years (3 years + 5 years) in addition to the period of service rendered in the defence services as on the closing date.

UR

Up to the age of 45 years

OBC (NCL)

Up to the age 48 years

SC/ST


Persons with disability

UR OBC(NCL) SC/ST

Candidates Domiciled In J&K ONLY From 01-01-1980 TO 3112-1989 Upper Age limit for Central Govt. Civilian Employees

UR OBC(NCL) SC/ST UR OBC(NCL)

10 years 13 years 15 years 5 years 8 years 10 years Up to the age 40 years Up to the age 43 years

Disabled Defence Services Personnel


Page 4 of 46

S. NO

CATEGORY

AGE RELAXATION AFTER UPPER AGE LIMIT

(General/ Unreserved) who SC/ST have rendered not less than 3 years regular and continuous service as on Closing date.


UR 9.

Retrenched Central Government OBC(NCL) Employee SC/ST

3 years + up to the Period of previous service under the Govt. of India 06 years (3 year + 3 year) +up to the Period of previous service under the Govt. of India 08 years (3 years + 5 years) +up to the Period of previous service under the Govt. of India

Whole time Cadet Instructors in NCC UR a) Who are released from NCC OBC(NCL) after expiry of their initial/extended tenure SC/ST

UR

10.

b) Who are released from NCC OBC(NCL) before the expiry of their initial/extended tenure

SC/ST

UR 11.

Ex-General Reserve Engineer Force Personnel (GREF)

OBC(NCL) SC/ST

Territorial Army Personnel who have service on the permanent staff of Territorial Army unit or 12. have been embodied for service under T.A. Rule 33 for a continuous period of not less than six month 13.

Widows, Divorced woman and woman judicially separated

UR

OBC(NCL)

SC/ST UR


3 years + Period of service rendered in NCC 06 years (3 years + 3 years) +Period of service rendered in NCC 08 years (3 years + 5 years) +Period of service rendered in NCC 3 years + Period of service rendered in NCC provided they have served in NCC for a period of not less than six months prior to their release from NCC 06 years (3 years + 3 years) +Period of service rendered in NCC provided they have served in NCC for a period of not less than six months prior to their release from NCC 08 years (3 years + 5 years) +Period of service rendered in NCC provided they have served in NCC for a period of not less than six months prior to their release from NCC 3 years + Period of Service in GREF 06 years (3 years + 3 years) +Period of Service in GREF 08 years (3 years + 5 years) +Period of Service in GREF 3 years + Entire period of embodied service including broken period in the Territorial Army 06 years (3 years + 3 years) +Entire period of embodied service including broken period in the Territorial Army 08 years (3 years + 5 years) +Entire period of embodied service including broken period in the Territorial Army Up to the age of 35, but no relaxation of educational qualification or method of

Page 5 of 46

S. NO

CATEGORY

AGE RELAXATION AFTER UPPER AGE LIMIT

from their husbands and who are not re-married

recruitment Up to the age of 38, but educational qualification recruitment Upto the age of 40, but educational qualification recruitment 5 years 8 years 10 years

OBC(NCL)

SC/ST

14. Meritorious Sportspersons

NOTE 1:

NOTE 2:

NOTE 3:

NOTE 4:

UR OBC(NCL) SC/ST

no relaxation of or method of no relaxation of or method of

The crucial date for determining the eligibility criteria will be the closing date of ONLINE application. In so far as cases of Ex-Serviceman are concerned, deduction of the military service rendered from the age of Ex-Servicemen is permissible against the reserved or unreserved posts and such exemption cannot be termed as relaxed standards in regard to age. Ex-Servicemen and Physically Handicapped candidates may apply against posts even if the posts are not reserved/ear-marked for them. However, only age relaxation and fee exemption will be granted and they will be considered without horizontal reservations, subject to the post being identified for PH. Candidates belonging to the Scheduled Castes, the Scheduled Tribes and theOther Backward Classes whoare also covered under any other clauses above, viz.those coming under the category of Ex-servicemen, persons domiciled in the State of J & K, blind, Hearing Impaired and orthopedically handicapped etc. will be eligible for grant ofcumulative age relaxation under the respective categories. Meritorious sportsperson in categories of sports specified as per extant rules (O.M. No. 14034/01/2013-Estt-(D) dated 03.10.2013), will be eligible for age relaxation in upper age limit up to a maximum of 5 years (10 years in case of those belonging to Schedule Castes/Schedule Tribes and 8 years in case of those belonging to Other Backward Classes). This concession will be available only to those sportspersons who satisfy all other eligibility conditions relating to educational qualifications etc. and furnish a certificate in the form and from an authority as prescribed.

4.2 EDUCATIONAL QUALIFICATIONS: NAME OF TRADE/POST Semi Skilled Workman

Labour

QUALIFICATIONS Matriculation + National Trade Certificate (NTC)/National Apprentice Certificate (NAC) issued by National Council of Vocational Training (NCVT). Matriculation


Page 6 of 46

For Ex-Servicemen

NOTE 1:

Technicians with upgrading qualifications of Class – III equivalent to NAC. (With due endorsement of the equivalence of Civil Qualification on their certificate) OR Technicians with upgrading qualifications of Class – II & Class I equivalent to NTC. (With due endorsement of the equivalence of Civil Qualification on their certificate) Degree/Diploma holders in engineering without possessing NAC/NTC shall not be accepted as qualification for direct Recruitment for the posts of semi-Skilled Industrial Employees against this ment.

NOTE 2:

Trade-wise relevant NAC/NTC certificates required for Direct recruitment of Industrial employees are enclosed at Annexure-‘B‘.

NOTE 3:

While applying online, PH Candidates should ensure their eligibility for the trades by going through “Annexure-‘D’- Posts identified suitable for Physically Disabled Category along with the Physical Requirements and Functional Classifications.

5 SCHEME AND SYLLABUS: Given at Annexure ‘C’ 6 CENTRES OF EXAMINATION: Centre will be allotted with respect to location of the Ordnance Factory applied by the candidate in one of the 12 centres viz. Bhubaneswar, Chennai, Coimbatore, Delhi, Hyderabad, Jabalpur, Kolkata, Kanpur, Mumbai, Nagpur, Pune and Trichy.Additional centres like Bhopal, Lucknow and Dehradun may be included. Candidates may be allotted any other centre other than the one determined at the time of submission of online application for istrative reasons. No request for change of centre shall be entertained under any circumstances at any stage of the examination. 7 MEDIUM OF EXAMINATION: The examination will be trilingual, i.e., Hindi, English and regional language of the State where the factory against which the candidate has applied is located. With reference to Ordnance Factories and their respective locations, this translates to English, Hindi & any one regional language among the following- Bengali/ Marathi/Oriya/Tamil/Telugu.It may be noted that candidates can appear only for that regional language of the state where the factory concerned is located and will have to appear for examination in that State/Centre only. 8 MODE OF SELECTION: a) Selection process shall comprise of a 2 stage process:  Written examination of 100 marks, objective type and OMR based  Trade Test (Practical) at respective factory along with document verification b) On the basis of merit list based on marks obtained in written test, candidates 1.25 times the number of vacancies shall be called for Trade Test (Practical). c) The Trade Test (Practical) shall be only qualifying in nature,without any marks. However, those candidates who do not qualify in the Trade Test shall not be considered at all, irrespective of marks obtained in thewritten examination. d) The credentials (as submitted in the application) of the candidates called for the trade test (Practical) will be verified with the original documents at the time of Trade Test at the respective factory.


Page 7 of 46

e) The final merit/select list shall be based on marks obtained in the written test only, subject to document verification and qualifying the Trade Test. f) The final merit/select list thus prepared factory wise will bepublishedat www.ofb.gov.in. NOTE: i) Preference to Ex-Trade Apprentices of Ordnance Factories:As per current executive order of MOD/OFB, extra 5 marks “which is under litigation as on date” may be given to Ex-trade Apprentices of Ordnance Factories, in the final merit list of the written examination to be conducted for a total of 100 marks for recruitment of Industrial Employees in Ordnance Factories against this ment. This provision is sub-judice and subject to outcome of court cases/orders. ii) Resolution of Tie(in order of preference): Semi-Skilled Tradesman: a) Ex-Trade Apprentice of the concerned recruiting Ordnance Factory will get preference in the factory wise merit list. b) If both candidates are Ex-Trade Apprentices from the same ordnance factory, then batch seniority/Marks will be taken into consideration as given above. c) Ex-trade Apprentices of sister Ordnance Factory will get preference thereon, with seniority conditions as given above d) The candidates scoring higher marks in Part – “B” will get preference. e) The candidate older in age will get preference. f) Alphabetical order of names. Labour: a) The candidate older in age will get preference. b) Alphabetical order of names. 9

HOW TO APPLY: The candidates are advised to examine all the options available and take an informed decision. 9.1 Candidate can apply to one factory only, as per his/her choice. Merit list will be prepared factory wise and select list will be made as per reservation roster applicable to the location of the factory concerned. Candidate will be eligible to get the benefit of community/caste reservation only in case the particular caste to which the candidate belongs to is included in the list of reserved communities recognized in the State in which the factory is located. 9.2

Candidates can apply for ONLY one trade: The candidates are advised to examine all the options available and take an informed decision. The candidate can apply to only one trade of one factory, subject to eligibility as per Annexure B.However, in certain trade/post such as Examiner (Engg), if a candidate wishes to apply for more than one trade (wherever applicable and eligible as mentioned in Annexure B as “Single Application”), she/he must give their choice of trade in the order of preference among the options, while filling the online application. In such cases, candidates will be emled based on merit-cum-choice subject to suitability. Post allotted to a candidate at first opportunity of emment in such a situation shall not be reviewed/revised/re-allotted under any circumstances.


Page 8 of 46

9.3

Candidates are required to apply online through the website http://www.ofb.gov.in. Detailed instructions for filling up online applications are available on the above mentioned website.

9.4

SALIENT FEATURES OF THE SYSTEM OF THE ONLINE APPLICATION FORM ARE GIVEN HEREUNDER: a) Detailed instructions for filling up online applications are available through a link in the above mentioned website under the tab ‘Apply Online’ & ‘How to Apply’. b) The Online applications (Part I and II) can be filled from 19.06.2017 to till 23:55 Hrs on 10.07.2017. c) The candidate must ensure that before filling up of the Online Application, she/he must have the following ready:  Scanned photograph in 8-bit jpg/jpeg format of size 30 KB to 50 KB with resolution 140 pixel width and 60 pixel height and approx physical size 3.5 X4.5 cm. (Please note that applications with unclear photo, photo with cap, wearing goggles, disfigured or unidentifiable photo will be cancelled)  Scanned signature in 8-bit jpg/jpeg format of size 10-20 KB, 100 pixel width and 120 pixel height and approx. size 3.5 X 1.5 cm (Please note that applications with unclear/illegible signature will be cancelled)  Scanned left thumb impression in 8-bit jpg/jpeg format of size 10-20 KB, 100 pixel width and 120 pixel height and approx. size 3.5 X 1.5 cm (Please note that applications with unclear or smudged LTIwill be cancelled)  Requisite certificates for SC/ST/Physically Handicapped/OBC-Non Creamy Layer/Ex Trade Apprentices/Ex Servicemen, as applicable, in 8-bit jpg/jpeg format size 30 KB to 50 KB with resolution 140 pixel width and 60 pixel height.  Details of Roll Number, Name of Board, Percentage, Year of ing of Xth Standard to be entered, as and when asked for.  Details of Trade, Roll Number, Institute, Semester details, Month and Year of ing, Total marks obtained etc of NTC/NAC to be entered, as and when asked for.  Valid Photo ID Card with Number- Acceptable Photo IDs are port, Voter photo identity card, Driving Licence issued by RTO, PAN Card , Photo Identity card having serial number issued by Central / State Government, Unique Identification Card "Aadhaar”, Photo identity cards having serial number issued by public sector Undertakings of State/Central Government, District istrations, Municipal bodies and Panchayat istrations.  In case candidate requires a scribe, scribe details such as Name, Mobile Number, Email ID, Address, Qualification to be entered and Scanned Photo of scribe to be ed in 8- bit jpg/jpeg format size 30 KB to 50 KB with resolution 140 pixel width and 60 pixel height.  For Ex Servicemen-Discharge details to be entered and Scanned Discharge Certificate to be ed in 8- bit jpg/jpeg format size 30 KB to 50 KB with resolution 140 pixel width and 60 pixel height, as and when asked for.


Page 9 of 46



For Ex Trade Apprentices- Details of apprenticeship training done Ordnance Factories with relevant certificate to be ed in 8- bit jpg/jpeg format size 30 KB to 50 KB with resolution 140 pixel width and 60 pixel height, as and when asked for.  Details of credit card, debit card, net banking etc to be provided for fee payment, as and when asked for. d) Candidates will be required to complete the Online Application Form containing two stages viz. Part-I and Part-II, as per the instructions available through drop down menus. Candidates have to completely fill up the information in both the stages to be considered eligible for appearing in the written examination. e) On completing Part I, the candidates will receive an Application Registration Number (ARN) on the same mobile number which they entered. Input of erroneous or incorrect mobile number in Part I will lead to incomplete registration. f) On successful completion of Part I and receipt of Application Registration Number through SMS, the candidate should through ‘APPLICANT ’ in the website and complete all the information/formalities of PART-II, including fee payment, as per the dropdown menus and guidelines. g) The candidates are required to pay a fee of Rs.50/- Rupees Fifty only) [excepting SC/ST/Ex-Servicemen (eligible for reservation#) / Physically Handicapped /Womenwho are exempted from payment of fee] either by payment gateway integrated in the website by using credit card, debit card or net banking or by depositing the money in any branch of SBI by cash (through challan ed from this website).  CHALLAN MODE: Candidates may pay by cash in any branch of SBI through the SBI challan which can be generated and ed from the website. Applicants who pay by cash (Challan Mode) should take a printout of the system generated challan slip during PART-II of the registration and deposit the fee at an SBI branch counter before the closing date of application. After the candidate remits the cash at SBI branch, she/he has to enter the transaction reference number by logging into ‘APPLICANT ’ and the stamped challan displaying the transaction number. Please note that the option to the challan details will be available only 2 hours after ing of the challan. Only after this process is completed, registration process of such candidates who opt to pay by Challan Mode will be considered successfully completed. h) Applicants who are unable to pay the amount on the closing date even with valid Challan Slip will have the option for online payment mode also, which will be open until 23:55 hours of 10th July 2017. i) The candidates must ensure that while filling their Application Form, they are providing their valid and active E-Mail IDs as OFRC may use electronic mode of communication while ing them at different stages of examination process. j) The candidate shall print and retain the application forms with themselves only to be produced by her/him later, at the time of document verification/trade test. Candidates are NOT required to send hard copy of application forms to the respective Factory/OFRC/OFB.


Page 10 of 46

9.5

k) Candidates are strongly advised to apply online well in time without waiting for the last date for submission of Online Applications. Any duplicate applications with different trades/factories will be summarily rejected. The applicants are advised to submit only single application. However, if due to any unavoidable situation, if she/he submits another/multiple applications, then she/he must ensure that application with the higher Application Registration Number/last application is complete in all respects like applicants’ details, examination centre, photograph, signature, fee etc. The applicants who are submitting multiple applications should note that only the applications with higher Application Registration Number/last application shall be entertained by OFRC and fee paid against one registration shall not be adjusted against any other registrationnor refunded under any circumstances.

10 DOCUMENTS / CERTIFICATES REQUIRED 10.1 DOCUMENTS / CERTIFICATES REQUIRED AT THE TIME OF TRADE TEST/DOCUMENT VERIFICATION: The following original documents are required ONLY at the time of document verification/trade Test. a) Matriculation / 10th standard certificate b) NTC/NAC certificate /equivalent Army certificate c) NOC & Service Certificate for Departmental Candidates seeking age relaxation-A candidate claiming to belong to the category of Central Government servant must have served minimum three years of continuous service and thus seeking age relaxation would be required to produce a Certificate (NOC) issued after the date of ment from his/her employer that she/he is a regularly appointed Central Government Servant and not on casual/adhoc/daily wages/hourly paid/contract basis employee. d) Community Certificate by the candidate seeking reservation as SC/ST/OBC in the PRESCRIBED PROFORMA from the competent authority indicating clearly the candidate’s caste, the Act/Order under which the caste is recognized as SC/ST/OBC and the village/town the candidate is ordinarily a resident of. OBC candidates seeking reservation should submit certificate issued by the competent authority in specified format certifying that they do not belong to creamy layer. e) Physically Handicapped certificate in prescribed Performa issued by the Competent Authority for physically handicapped persons eligible for appointment to the posts on the basis of prescribed standards of Medical Fitness. The Competent Authority to issue Physically Handicapped Certificate shall be Medical Board duly constituted by the Central or State Government. f) Discharge Certificate issued by the competent authorities for candidates claiming ExServiceman category. g) If the certificate is not either in Hindi/English, then a duly translated copy in Hindi/English has to be produced at the time of document verification. h) Decision with regard to Document Verification will rest with concerned Ordnance Factories and shall be deemed final.


Page 11 of 46

10.2 DOCUMENTS / CERTIFICATES TO BE ED AT THE TIME OF ONLINE APPLICATIONSTAGE a) Community Certificate by the candidate seeking reservation as SC/ST/OBC in the PRESCRIBED PROFORMA from the competent authority indicating clearly the candidate’s caste, the Act/Order under which the caste is recognized as SC/ST/OBC and the village/town the candidate is ordinarily a resident of. OBC candidates seeking reservation should submit certificate issued by the competent authority in specified format certifying that they do not belong to creamy layer. b) Physically Handicapped certificate in prescribed Performa issued by the Competent Authority for physically handicapped persons eligible for appointment to the posts on the basis of prescribed standards of Medical Fitness. The Competent Authority to issue Physically Handicapped Certificate shall be Medical Board duly constituted by the Central or State Government. c) Discharge Certificate issued by the competent authorities for candidates claiming ExServiceman category. d) NAC/NTC certificate of Ex Trade Apprentices clearly specifying name of Ordnance Factory concerned. (Please note that Ex Trade Apprentices mean candidates who have completed apprenticeship training from Ordnance Factories) 11 APPLICATION FEES:Candidates are required to pay a fee of Rs.50/- as application fees. While filling the online application, the candidate will be directed to the payment gateway to remit the applicationfees.  After entering the relevant details, the candidates may remit the money through credit card, debit card or net banking through the payment gateway provided in the website.  CHALLAN MODE: Candidates may pay by cash in any branch of SBI through the SBI challan which can be generated and ed from the website. Applicants who pay by cash (Challan Mode) should take a printout of the system generated challan slip during PART-II of the registration and deposit the fee at an SBI branch counter before the closing date of application. After the candidate remits the cash at SBI branch, she/he has to enter the transaction reference number by logging into ‘APPLICANT ’ and the stamped challan displaying the transaction number. Please note that the option to the challan details will be available only 2 hours after ing of the challan. Only after this process is completed, registration process of such candidates who opt to pay by Challan Mode will be considered successfully completed. Applicants who are unable to pay the amount on the closing date even with valid challan slip will have the option for online payment mode also which will be open until 23:55 hours of 10th July 2017.Applicants’ names whose payment details have not been received from the bank (for payment through Challan Mode) will be displayed on the website within two weeks after the last day of submission of online application as fictitious payment cases. All such applications without the fees will be out rightly rejected.  Fee once paid will not be refunded under any circumstances. The paid fees shall also not be carried forward for any other examination or selection. EXEMPTION FROM PAYMENT OF FEE:SC/ST/Ex-Servicemen (eligible for reservation#) / Physically Handicapped /Women only are exempted from payment of fee.


Page 12 of 46

(#-Ex-servicemen who have already secured employment in civil side under CentralGovernment in Group ‘C’ posts on regular basis after availing of the benefits of reservationgiven to Ex-servicemen for their re-employment are NOT eligible for fee concession.However, she/hecan avail of the benefit of reservation as Ex-serviceman for subsequentemployment if she/heimmediately, after ing civil employment, gives self-declaration/undertaking to the concerned employer about the date wise details of applicationfor various vacancies for which she/hehad applied for before ing the initial civilemployment as mentioned in the OM NO. 36034/1/2014-Estt (Res) dated 14.08.2014 issuedby DOP&T.)

12 RESERVATION: Reservation for SC/ST/OBC/Ex-Servicemen/ Physically Handicapped etc. categories is available as per extant Government orders. Candidate will be eligible to get the benefit of community/caste reservation only in case the particular caste to which the candidate belongs to is included in the list of reserved communities recognized by the State Government of the State in which the factory is located. Candidates are also warned that they will be permanentlydebarred from the examinations conducted by OFRC, in case they fraudulentlyclaim SC/ST/OBC/Ex-Servicemen/PH status. 12.1

FOR SC/ST CANDIDATES:A candidate who claims to belong to one of the Scheduled Caste or the Scheduled Tribes should be in possession of a certified copy of a certificate in the format prescribed for Central Government jobsfrom the District Officer or the Sub-Divisional Officer or any other officer (who has been designated by the State Government concerned as competent to issue such a certificate)of the district in which his parents (surviving parent) ordinarily reside, in of his claim. If both his parents are dead, the officer g the certificate should be of the district in which the candidate himself ordinarily resides otherwise than for the purpose of his own education. Such Certificates are required to be ed at the time of submission of ONLINE applications. All these certificates will be verified in original by the respective Ordnance Factories at the time of Practical Test (Trade Test) / Document verification stage.

12.2

FOR OBC CANDIDATES:Candidates claiming OBC status may note that certificate on creamy layer status MUST have been obtained within three yearsbefore the closing date of online application. Theclosing date for submission of online application will be treated as the date of reckoning for OBC and creamy layer status of the candidate. The candidate should furnish the relevant OBC Certificate in the format prescribed for Central Government jobs issued by the competent authority on or before the closing date, to be ed at the time of application stage itself and to be submitted at the time of trade test/document verification at the concerned factory.

12.3

FOR EX- SERVICEMEN CANDIDATES:Ex-servicemen who have already secured employment in civil side under Central Government in Group ‘C’ posts on regular basis after availing of the benefits of reservation given to Ex-Servicemen for their re-employment are NOT eligible for fee concession. However, she/he can avail of the benefit of reservation as Ex-Serviceman


Page 13 of 46

for subsequent employment if she/he immediately, after ing civil employment, gives selfdeclaration/undertaking to the concerned employer about the date-wise details of application for various vacancies for which she/he had applied for before ing the initial civil employment as mentioned in the OM NO. 36034/1/2014-Estt (Res) dated 14.08.2014 issued by DOP&T. The period of “Call up service” of an Ex-Serviceman in the Armed Forces shall also be treated as service rendered in the Armed Forces for purpose of age relaxation as per rules. For any serviceman of the three Armed Forces of the Union to be treated as ExServiceman for the purpose of securing the benefits of reservation, he must have already acquired, at the relevant time of submitting his application for the post / Service, the status of Ex-Serviceman and/or is in a position to establish his acquired entitlement by documentary evidence from the competent authority that he would complete specified term of engagement with the Armed Forces within the stipulated period of one year from the Closing Dateof application, or otherwise than by way of dismissal or discharge on of misconduct or inefficiency. Explanation: An ‘Ex-Serviceman’ means a person – I. who has served in any rank whether as a combatant or noncombatant in the Regular Army, Navy and Air Force of the India Union, and a) who either has been retired or relieved or discharged from such service whether at his own request or being relieved by the employer earning his or her pension; or b) who has been relieved from such service on medical grounds attributable to military service or circumstances beyond his control and awarded medical or other disability pension; or c) (i) who has been released from such service as a result of reduction in establishment; or (ii)who has been released from such service after completing the specific period of engagement, otherwise than at his own request, or by way of dismissal, on of misconduct or inefficiency and has been given a gratuity; and includes personnel of the Territorial Army, namely, pension holders for continuous embodied service or broken spells of qualifying service; or (iii) Personnel of the Army Postal Service who are part of Regular Army and retired from theArmy Postal Service without reversion to their parent service with pension, or arereleased from the Army Postal service on medical grounds attributable to or aggravated by military service or circumstance beyond their control and awarded medical or other disability pension; or (iv)Personnel who were on deputation in Army Postal Service for more than six months prior to the 14th April, 1987; or (v) Gallantry award winners of the Armed forces including personnel of Territorial Armyor (vi) Ex-recruits boarded out or relieved on medical ground and granted medical disabilitypension. Reservation & Age concession is not issible to sons, daughters and dependents of exservicemen.


Page 14 of 46

12.4

FOR PERSONS WITH DISABILITIES/PHYSICALLY HANDICAPPED: 1) While applying online, PH Candidates should ensure their eligibility for the trades by going through “Annexure-‘D’- Posts identified suitable for Physically Disabled Category along with the Physical Requirements and Functional Classifications. 2) As per Ministry of Social Justice and Empowerment’s Notification No. 34-02/2015-DD-III dated: 06-02-2015, the reservation in appointment is not available for multiple disability category. 3) Orthopedically disabled persons (OH who suffers from not less than 40% disability), Hearing impaired (HH) persons who have aloss of 60% decibel or more in the better ear and Persons with visual disability of not less than forty percent will only be considered eligible for reservation as per the extant Govt orders on the subject. 4) One eyed candidates and partially blind candidates who are able to read the normal Question Paper set for all the candidates with or without magnifying glass and who wish to write/indicate the answer with the help of Magnifying Glass will be allowed to use the Magnifying Glass in the Examination Hall and will not be entitled to a Scribe. Such candidates will have to bring their own Magnifying Glass to the Examination Hall. 5) Question Papers and Answer Sheets will not be provided in Braille. 6) Assistance for Scribe: The following candidates may avail the assistance of a scribe in the written examination and age reader for Trade Test (if required), subject to such requests being made in the application form itself: i) Visually handicapped (VH) with disabilities of forty percent (40%) or above, ii) Orthopedically handicapped candidates afflicted by Cerebral Palsy iii) Orthopedically handicapped candidate (other than a candidate afflicted by Cerebral Palsy) who has a loco motor disability (40% or more) wherein dominant writing extremity is affected to the extent of slowing the performance of the candidate (such deficiency may either be indicating in the medical certificate submitted by the candidate or else visible and which after due verification is found to be legitimate and bonafide). Candidates may note that a compensatory time of 20 minute per hour in the written examinationwill be extended to all the above candidates (i), (ii) and (iii). 7) Such candidates intending to avail the assistance of a scribe in the written examination shall submit their request for the same at the time of online application. 8) Engagement of Scribe will be subject to the following conditions: (i) Candidate will have to arrange their own scribe at their own cost for the writtenexamination. (ii) Call letters with details of scribes accompanying the candidates will be generated for the examination. (iii) The candidate shall be responsible for any misconduct on the part of the scribe brought by him/her. (iv) The academic qualification of the scribe should be one grade below the prescribed educational qualification of the post for which he has applied. The details of the scribe including educational qualification should be intimated at the time of application stage, when prompted for.


Page 15 of 46

(v) Persons with visual disability of less than 40% will not be considered as visually handicapped persons. (vi) No request for change in scribe shall be entertained at any stage. 12.5

SERVING EMPLOYEES:Persons working in Central Government departments must apply through proper channel along with a certificate (NOC) from their establishment that neither any disciplinary case is pending nor contemplated against them. They must also be in possession of a certificate that in case of selection, their establishment shall release them immediately.A candidate claiming to belong to the category of Central Government servant and thus seeking age relaxation should be in possession of a Certificate issued after the date of ment from his/her employer that she/he is a regularly appointed Central Government Servant and not on casual/adhoc/daily wages/hourly paid/contract basis employee. All these certificates will be verified in original by the respective Ordnance Factories at the time of Practical Test (Trade Test) / Document verification stage.

13 NOTICE TO PROSPECTIVE APPLICANTS:  The schedule for date of ing the it card and date of written examination will be notified on the website. The e-it card will be made available in the web portal/link though www.ofb.gov.infor ing by eligible candidates. No it card will be sent by post. In case of any change in schedule of dates, amendment etc. the same will be made available on the OFB website, www.ofb.gov.in /web portal only.  Changes in dates or in the recruitment process or any other changes will be notified ONLY on the OFB link/ this website. There will not be any separate ment in print media in this regard. The candidates are advised to check the Website regularly to take notice.  Candidates whose applications have been rejected will be notified on the website itself 15-20 days after the closing date of application. 14 PAYMENT OF TRAVELLING ALLOWANCE: SC/ST candidates and Physically Disabled Ex-Servicemen called for trade test/practical test/ document verification may be paid Travelling Allowance, as per extant Government rules. No Travelling Allowance will be paid to any candidate for appearing in the written examination. 15 GENERAL INFORMATION: Applicants are advised to note the following instructions carefully: I. The candidates are required to carefully go through the ment in detail. II. The candidate must check her/his eligibility before applying for a trade/post/factory and take an informed decision. III. Candidates will have to apply ONLINE only. IV. Itisto be noted that mere submissions of application form, receipt of ‘acknowledgement’, receipt of it card and appearance in written examination/practical test (trade test) does not guarantee eligibility/candidature in any of the Ordnance Factories. The selection of candidates will be made based on factory-wise merit position considering available vacancies category-wise, scrutiny of original copy of credentials and eligibility, clear police


Page 16 of 46

V.

VI. VII.

VIII. IX. X.

XI.

XII.

XIII.

XIV. XV. XVI.

verification report & medical test etc. The decision of the competent authority shall be final in this regard. Candidates are NOT required to send hard copy of application forms to the respective applied Factory/OFRC/OFB. However, the same shall be printed andretained by the candidates only to be produced by the candidates later, at the time of document verification/trade test. Candidates are required to check the website regularly for any updates and changes. Candidates are required to give a valid mobile Number and e-mail id for periodical notices. Error in these details will result in non-delivery of important communication with respect to the examination.Candidates are advised to retain the same Mobile Number and email ID in their own interest, till all the processes of the said recruitment drive are completed. Written examination is ‘Multiple Choice Question type (MCQ)’ and OMR based. There will be NO NEGATIVE MARKINGfor wrong answer. Canvassing of any kind will disqualify the candidate. Candidates are advised not to fall prey to any unscrupulous elements. Candidates will be permitted to enter examination hall with valid IT CARD and original PHOTO ID CARD only. The acceptable Photo IDs are as given:port, Voter photo identity card, Driving Licence issued by RTO, PAN Card , Photo Identity card having serial number issued by Central/State Government, Unique Identification Card "Aadhaar”, Photo identity cards having serial number issued by public sector Undertakings of State/Central Government, District istrations, Municipal bodies and Panchayat istrations. Hence the candidates are also advised to ensure that their clear PHOTO, SIGNATURE & Left Thumb Impression have been ed and are also printed on the Application Form. The candidate must not attempt impersonation or take help fromany impersonator at any stage of the selection process or try to copy from neighboring candidates, books and use any electronic gadgets or any other unfair means. This shall lead to cancellation of candidature, debarment in appearing future exams conducted by OFRC/OFB without prejudice to criminal prosecution. The candidates will be thoroughly frisked at the time of entry to the examination centre. Candidates are advised not to bring any valuable/costly items to the Examination Halls. OFRC/OFB will not be responsible for safe keeping of any items belonging to them and the candidates shall be solely responsible for their belongings. No electronic gadgets shall be allowed inside the examination centre. The biometric attendance and record shall be taken in the examination hall. The candidates are advised to ensure that they do not apply mehendi/tattoos on their fingers, which may lead to non-capture of biometric attendance. The candidature of the candidates shall be cancelled in the absence of non-capture of biometric data. The candidate may note that OFRC/OFB may record the entire examination process through Videography/CCTV at all the venues. Any material suppression of facts or submitting forged certificates/documents shall lead to rejection of candidature at any stage of selection of this process. Decision of the competent authorityin all matters relating to the eligibility, acceptance/rejection of any application, allotment of language, examination centre, etc will


Page 17 of 46

XVII.

XVIII.

XIX.

XX.

XXI.

XXII.

XXIII. XXIV.

XXV.

be final and binding on the candidate and no inquiry/correspondence shall be entertained in this regard. Any subsequent changes in the and conditions of the recruitment of Industrial Employees (Semi-Skilled) & Labour Group ‘C’ against this ment, as per the extant rules will stand good. OFB/OFRC reserves the right to incorporate any subsequent changes/modifications/additions in the &conditions under this ment notice as necessitated and applicable.Any corrigendum will be published only on the OFB site (www.ofb.gov.in) or the site meant for applying ONLINE. Any dispute with regard to the recruitment of Industrial Employees (Semi-Skilled)& Labour against this ment, will be subject to courts/tribunals having jurisdiction over the City/Town in which the concerned Ordnance Factory is situated against which the candidate has submitted her/his application. The candidates applying for the examination should ensure that they fulfil all the eligibility criteria for ission to the examination. Their ission at all the stages of examination will be purely provisional, subject to their satisfying the prescribed eligibility conditions. If, on verification of documents / certificates, at any time before or after the written examination, it is found that the candidate does not fulfil any of the eligibility conditions, his/her candidature for the examination shall be cancelled by OFB or concerned Ordnance Factories/units at any stage of recruitment. After the written examination is over, the question paper and provisional answer keys will be ed on the website within 3 days. If any candidate wants to contest the ed provisionalanswer keys, the candidate can do so within 07 days along with ing documents ONLY after paying the prescribed fees of Rs 100/- for each question contested ONLINE. After the stipulated period is over, no contest shall be entertained. A third party expert will be constituted to examine the contests received and to finalise the revised/final answer key for evaluation. The decision of third party expert and the result based on the same will be final and binding. Record retention period for examination material (Original OMR Sheet/Attendance Sheet/Question paper or any other records / documents etc.) will be 3 month after the declaration of result of written exam. After that, no RTI shall be entertained by OFRC/any unit of Ordnance factories regarding this examination. The Competent Authority reserves the right to adopt any alternative lawful mode of selection in part or in whole, in case of contingency. The applicants are required to take a print-out of it Card to appear in the exam from the ONLINE portal. The candidates are NOT required to send any hard copy, anywhere, including that of his application filled up online, any documents or it Card. it Cards can be ed from the online portal/website. The candidates are advised to regularly check OFB website, www.ofb.gov.in, and the online portal/websitefor regular updates regarding of it card, exam dates etc. The applicants are required to ensure that the following details appear on the it Card print-out while ing the it Card from the online portal: A. Name and Roll No. B. Clear photo for Identification purpose C. Clear and legible signature


Page 18 of 46

D. Clear Left Thumb Impression E. Complete address of the Centre/Venue However, the it Card shall be retained by the candidates only and produced at the time of written examination and subsequently, at the time of document verification/trade test. The candidate shall ensure that the it Card shall be duly signed by the invigilator during the written examination. XXVI. Request for change/correction in any particular in the application form shall not be entertained under any circumstances. The OFRC/OFB will not be responsible for any consequence arising out of non-acceptance of any correction/addition/deletion in any particular filled in the application form, whatever the reason may be. XXVII. If sufficient candidates are not available in the required PWD category within the same trade, then there will be lateral exchange of vacancies in any one of the above mentioned PWD category, subject to post being identified for the disability. XXVIII. The vacancies intimated in this ment are tentative in nature and OFRC/OFB reserves the right to increase/decrease the number of vacancies or cancel the recruitment process, in total. XXIX. The candidates may please take note that they are liable to be posted/adjusted in any Ordnance Factory situated across India, other than the one they have applied to. XXX. In accordance with the directions issued by DoPT vide its O.M. No. 39020/1/016/Estt(B)dated 21.06.2016 for increasing access of the unemployed candidates to jobopportunities it has been decided that after declaration of final result,OFRC will make available scores and ranking of candidates in the recruitment examination on itsportal/www.ofb.gov.in. Accordingly, it has been decided that apart from Roll Number-scores, ranking ofthe candidates in the final examination, Name of candidate, name of parents/husband,educational qualification, date of birth, category, sex (male/female), total marks inqualifying examination, complete address including e-mail address will be madeavailable on the website after the declaration of final result. However, the candidates willhave the option to opt out from the disclosure scheme to disclose his/her informationpublically at the time of filling up the application. 16 REJECTION OF CANDIDATURE: The application or candidature of the candidate may be rejected for any of the following reasons: I. Incomplete Application II. Fees not remitted where applicable III. Fees Details not entered/Fees Details not correctly (for SBI Challan only) entered while submitting the ONLINE application. IV. Does not possess the prescribed qualification for the post of Direct Recruitment of Industrial Employees (Semi-Skilled) & Labour Group ‘C’& Labour as on closing date of submission of on-line application. V. Over aged or under aged or Date of Birth not filled or wrongly filled. VI. Double or multiple applications submitted. VII. Application with unclear photo, photo with cap, wearing goggles, disfigured or unidentifiable photo, unclear signature or LTI.


Page 19 of 46

VIII. IX.

X. XI. XII. XIII. XIV.

Candidate's name is figuring in the debarred list. Only a single application will be entertained. Candidature in respect of multiple applications (if found) may be rejected out rightly, without any notice to such candidates. Mismatch of Name, Father's name and Date of Birth in ONLINE application form with the 10th certificate/NAC/NTC certificate. Irrelevance between the applied trade and the NAC/NTC trade certificate. Any other irregularities which may render the candidature of applicant invalid by OFB/OFRC. Any material suppression of facts or submitting forged certificates/documents shall lead to rejection of candidature at any stage of selection of this process. The candidature of candidates shall be cancelled in the absence of non-capture of biometric data due to mehendi/tattoo on fingers.


Page 20 of 46

ANNEXURE-‘A’ STATE: BIHAR 1. Ordnance Factory Project Nalanda (OFPN) Trade UR OBC SC

ST

Total

PH Ex-SM OH HH VH Labour 29 13 8 0 50 1 1 0 5 OMHE (Operator Material 6 2 1 0 9 0 0 0 Handling Equipment) 1 Rigger 3 0 0 0 3 0 0 0 Total 38 15 9 0 62 1 1 0 6 While applying online, PH Candidates should ensure their eligibility for the trades by going through Annexure‘D’. STATE: CHANDIGARH 2. OrdnanceCable Factory Chandigarh (OCFC) Trade UR OBC SC ST Total

PH

Ex-SM

OH HH VH Boiler Attendant 0 0 1 0 1 0 0 0 Carpenter 2 0 0 0 2 0 0 0 Examiner (Engg) ** 0 1 1 0 2 0 0 0 Fitter Auto 1 0 0 0 1 0 0 0 Fitter Electric 0 1 1 0 2 0 0 0 Fitter Pipe 0 1 0 0 1 0 0 0 Machinist 19 8 5 0 32 0 2 5 Mason 1 0 0 0 1 0 0 0 Miller 1 0 0 0 1 1 Millwright 1 0 0 0 1 1 0 Painter 2 0 0 0 2 0 0 0 Turner 3 0 0 0 3 1 0 Welder 1 0 0 0 1 1 0 Total 31 11 8 0 50 6 5 (**) Qualification for Electrician as Examiner (Engg) Trade will be Matriculation + NAC/NTC in the Electrician, Wireman, Cable ter, Winder (Armature), Mechanic (HT, LT Equipments and Cable ting), Electrical Mechanic, Mechanic Electrical Maintenance (Industrial Automation), Mechanic (Repair and Maintenance of instruments used in Electrical Engineering)trades. Note: Candidates who wish to apply for more than one trade [for e.g. Electrician and Examiner (Engg) both] should exercise their preference of trade while applying online, subject to eligibility. While applying online, PH Candidates should ensure their eligibility for the trades by going through Annexure‘D’.


Page 21 of 46

STATE: MAHARASHTRA 3. Ammunition Factory Khadki (AFK) Trade UR OBC SC ST

Total

PH HH 0 0 0 0 0

OH 0 0 0 0

Ex-SM VH 0 0 0 0 0 0

W (Chemical Process Worker) 3 3 4 1 11 DBW (Danger Building Worker) 75 47 22 15 159 Fitter Boiler 5 1 1 0 7 Mason 0 1 0 0 1 Electrician 6 1 2 1 10 Labour 17 11 5 1 34 Machinist 36 24 8 2 70 1 5 Fitter pipe 3 2 1 0 6 93 4 Grinder 7 2 1 0 10 Boiler Attendant 2 1 0 0 3 0 Total 154 93 44 20 311 1# 5# 4# 93 (#)- While applying online, PH Candidates should ensure their eligibility for the trades by going through Annexure-‘D’.

STATE: MAHARASHTRA 4. High Explosive Factory (HEF) Trade UR

OBC

SC

ST

Total

Boiler Attendant

1

1

0

1

3

W(Chemical Process Worker) Welder Fitter Refrigeration Fitter Instruments Fitter Electronics Mason SMW (Sheet Metal Worker) Electrician Carpenter Painter Fitter General (Mech) Machinist

24 1 2 2 2 4 2 1 3 4 3 2

14 0 0 0 0 0 1 1 1 1 0 0

7 0 0 0 0 0 0 1 0 0 0 0

4 0 0 0 0 0 0 1 0 0 0 0

49 1 2 2 2 4 3 4 4 5 3 2

OH 0

PH HH 0

VH 0

0 0 0 0 0 0 0

0 0 0 0 0 0 0

0 0 0 0 0 0 0

0 0

0 0 0

1#

Ex-SM 0 4 0 0 0 0 0 0 0 0 0 0 0

Total 51 19 8 6 84 4 1 (#)-1 PH vacancy reserved for the following trades as per physically disabled category suitable for the jobs Electrician (OH), Carpenter (OH), Painter (OH/HH), Fitter General Mech (OH/HH/VH) and Machinist (OH/HH/VH). While applying online, PH Candidates should ensure their eligibility for the trades by going through Annexure-‘D’.


Page 22 of 46

STATE: MAHARASHTRA 5. Ordnance Factory Ambajhari (OFAJ) Trade

UR

OBC

SC

ST

Total

PH OH

HH

Ex-SM VH

Electrician 14 0 0 2 16 2 0 0 2 Examiner( Engg) ** 12 0 0 3 15 2 0 1 Examiner Metal 2 0 0 0 2 0 0 0 0 Examiner Metallography 1 1 0 0 2 0 0 0 0 Fitter Auto Electric 1 0 0 0 1 0 0 0 0 Fitter Electronics 7 0 2 0 9 0 0 0 1 Fitter Instruments 3 2 0 0 5 0 0 0 1 Fitter Pipe 3 0 0 0 3 0 0 0 0 Fitter Refrigeration 3 0 0 0 3 0 0 0 0 Grinder 3 4 0 1 8 0 0 0 1 Machinist 82 0 0 0 82 0 0 0 8 Mason 6 1 0 0 7 0 0 0 1 Miller 4 1 0 1 6 1 1 Millwright 20 4 3 2 29 2 0 3 Painter 4 0 0 1 5 0 0 0 1 Tool Maker 0 1 0 0 1 0 0 0 0 Turner 8 7 0 0 15 0 0 0 1 Welder 6 1 1 2 10 0 0 0 1 Total 179 22 6 12 219 7 22 (**) Qualification for Machinist as Examiner (Engg) Trade/Post will be Matriculation + NAC/NTC in the Machinist trade only. Note: Candidates who wish to apply for more than one trade [for e.g. Machinist and Examiner (Engg) both] should exercise their preference of trade while applying online, subject to eligibility. While applying online, PH Candidates should ensure their eligibility for the trades by going through Annexure‘D’.

STATE: MAHARASHTRA 6. Ordnance Factory Bhandara (OFBA) Trade UR OBC SC ST Total

PH Ex-SM OH HH VH Fitter General (Mech) 8 1 0 1 10 0 0 0 5 Fitter Instruments 4 1 2 0 7 0 0 0 1 Fitter Pipe 0 1 0 1 2 0 0 0 0 Fitter Refrigeration 1 0 1 0 2 0 0 0 1 Labour 38 17 6 6 67 0 2 0 11 Machinist 1 0 0 0 1 0 1 0 0 Turner 1 0 0 0 1 0 0 0 0 OFBA Total 53 20 9 8 90 0 3 0 18 While applying online, PH Candidates should ensure their eligibility for the trades by going through Annexure‘D’.


Page 23 of 46 STATE: MAHARASHTRA 7. Ordnance Factory Bhusawal (OFBH) Trade UR OBC SC ST Total Carpenter Electrician Examiner (Engg) ** Fitter Electronic Fitter (General Mech)

2 9 1 2

0 5 1 1

0 0 0 0

0 1 0 0

2 15 2 3

OH 0 0 0 0

17

9

3

4

33

0

PH HH

Ex-SM VH

7 18 Machinist 34 18 10 5 67 0 Mason 1 1 0 0 2 0 Millwright 1 1 0 0 2 0 SMW (Sheet Metal Worker) 4 3 1 0 8 0 Turner 2 0 1 0 3 0 Welder 24 18 0 2 44 0 Total 18 97 57 15 12 181 0 7 Qualification for Machinist as Examiner (Engg) Trade/Post will be Matriculation + NAC/NTC in the Machinist trade only. Note: Candidates who wish to apply for more than one trade [for e.g. Machinist and Examiner (Engg) both] should exercise their preference of trade while applying online, subject to eligibility. While applying online, PH Candidates should ensure their eligibility for the trades by going through Annexure-‘D’. STATE: MAHARASHTRA 8. Ordnance Factory Chandrapur (OFCH) Trade UR OBC SC ST Total

PH Ex-SM OH HH VH DBW (Danger Building Worker) 51 19 9 0 79 0 0 0 Electrician 3 0 0 0 3 1 0 0 Examiner (Engg)** 2 0 0 0 2 0 2 0 Examiner (Filling) 2 0 0 0 2 0 0 0 15 Examiner (Proof & Test) 2 0 0 0 2 0 0 0 Fitter Auto Electric 0 1 0 1 2 0 0 0 Machinist 1 0 0 0 1 0 0 0 Total 61 20 9 1 91 1 2 0 15 (**) The trade-wise/category-wise number of vacancies against the Examiner (Engg) are as follows: UR OBC SC ST Total OH HH VH ExMatriculation + SM NAC/NTC in Fitter General (Mech) as 1 0 0 0 1 0 1 0 0 Fitter Examiner(Engg) Machinist as Examiner(Engg) 1 0 0 0 1 0 1 0 0 Machinist Note 1: Candidates who wish to apply for more than one trade [for e.g. Machinist and Examiner (Engg) both] should exercise their preference of trade while applying online, subject to eligibility. Note 2: Candidates who wish to apply for more than one trade [for e.g. DBW and Examiner (Filling) both] should exercise their preference of trade while applying online, subject to eligibility. While applying online, PH Candidates should ensure their eligibility for the trades by going through Annexure‘D’.


Page 24 of 46 STATE: MADHYA PRADESH 9. Gun Carriage Factory, Jabalpur (GCF) Trade UR OBC

SC

ST

Total

PH OH HH VH Vacancies for Gun Carriage Factory, Jabalpur (GCF) stand withdrawn.

Ex-SM

STATE: MADHYA PRADESH 10. Grey Iron Foundry, Jabalpur (GIF) Trade UR OBC

PH Ex-SM OH HH VH Electrician 7 1 1 3 12 0 0 0 4 Examiner (Engg) ** 4 2 1 2 9 0 0 0 0 Examiner (Metal) 4 1 1 3 9 0 0 0 1 Fitter Electric 1 1 0 2 4 0 0 0 1 Fitter Electronics 3 0 0 1 4 0 0 0 0 Fitter General (Mech) 14 3 8 8 33 1 1 1 12 Grinder 0 0 0 1 1 0 0 0 0 Labour 8 8 1 3 20 0 1 0 5 Machinist 13 3 2 5 23 0 1 1 10 Mason 1 0 0 0 1 0 0 0 0 Millwright 7 0 2 0 9 0 0 0 1 Moulder 9 3 4 4 20 0 0 0 0 Painter 2 0 0 0 2 0 0 0 0 Pattern Maker 2 0 0 0 2 0 0 0 0 Turner 6 2 1 3 12 0 0 0 0 Welder 6 3 3 3 15 0 0 0 1 Total 87 27 24 38 176 1 3 2 35 (**) The trade-wise/category-wise number of vacancies against the Examiner (Engg) are as follows: UR

OBC

SC

SC

ST

ST

Total

Total

OH

HH

VH

ExSM

Matriculation + NAC/NTC in

Machinist as Examiner(Engg) 2 1 0 1 4 0 0 0 0 Machinist Fitter General (Mech) as 2 1 1 1 5 0 0 0 0 Fitter Examiner(Engg) Note: Candidates who wish to apply for more than one trade [for e.g. Machinist and Examiner (Engg) both] should exercise their preference of trade while applying online, subject to eligibility. While applying online, PH Candidates should ensure their eligibility for the trades by going through Annexure-‘D’.


Page 25 of 46

STATE: MADHYA PRADESH 11. Ordnance Factory Itarsi (OFIT) Trade UR

OBC

SC

ST

Total

PH Ex-SM OH HH VH Boiler Attendant 0 0 0 2 2 0 0 1 0 Fitter Boiler 4 0 1 0 5 0 0 3 0 Carpenter 2 0 1 0 3 0 0 0 0 W (Chemical Process Worker) 18 10 4 3 35 0 0 0 5 Fitter Electric 3 0 1 1 5 0 0 1 0 Total 27 10 7 6 50 0 0 5 5 While applying online, PH Candidates should ensure their eligibility for the trades by going through Annexure‘D’.

STATE: MADHYA PRADESH 12. Ordnance Factory Khamaria, Jabalpur (OFK) Trade UR OBC SC ST Total

PH Ex-SM OH HH VH Labour 47 34 13 35 129 0 5 0 33 Total 47 34 13 35 129 0 5 0 33 While applying online, PH Candidates should ensure their eligibility for the trades by going through Annexure‘D’.

STATE: MADHYA PRADESH 13. Ordnance Factory Katni (OFKAT) Trade UR OBC Electrician Electroplater Examiner (Metal) Fitter General (Mech) Machinist Melter (F/NF) Millwright Moulder Total

4 0 0 1 1 4 0 1 11

0 0 0 0 0 1 0 0 1

SC 1 0 0 0 0 1 0 0 2

ST 3 1 3 0 1 1 1 0 10


Total 8 1 3 1 2 7 1 1 24

OH 0 0 0 0 0 0 0 0 0

PH HH 0 0 0 0 0 0 0 0 0

Ex-SM VH 0 0 0 0 0 0 0 0 0

2

2

Page 26 of 46 STATE: MADHYA PRADESH 14. Vehicle Factory Jabalpur (VFJ) Trade UR

OBC

SC

ST

Total OH

Vacancies for Vehicle Factory Jabalpur (VFJ) stand withdrawn.


PH HH

Ex-SM VH

Page 27 of 46 STATE: ORISSA 15. Ordnance Factory Bolangir (OFBOL) Trade UR

PH Ex-SM OH HH VH Boiler Attendant 4 0 1 1 6 0 0 1 1 Carpenter 4 1 0 1 6 0 0 0 1 DBW (Danger Building Worker) 126 28 42 56 252 0 0 0 18 Electrician 21 2 5 8 36 0 0 0 4 Electroplater 2 0 0 0 2 0 1 0 1 Examiner (Engg) ** 27 0 12 14 53 1 4 0 5 Fitter Refrigeration 9 1 3 2 15 0 0 3 2 Fitter Auto 5 1 1 1 8 0 1 2 1 Fitter Auto Electric 2 0 0 0 2 0 0 1 1 Fitter Electric 2 0 0 0 2 0 0 1 1 Fitter Electronics 3 1 1 0 5 0 0 1 1 Fitter General (Mech) 21 1 7 8 37 1 1 4 3 Fitter Instruments 1 0 0 0 1 0 0 0 0 Fitter Pipe 4 0 0 0 4 0 0 0 1 Grinder 2 0 0 0 2 0 0 0 1 Labour 11 2 3 4 20 1 2 Machinist 3 0 0 0 3 0 1 0 1 Mason 3 0 0 1 4 0 0 0 0 Miller 2 0 0 0 2 0 0 0 1 Painter 2 0 0 0 2 0 0 0 0 Welder 2 0 0 1 3 0 0 0 1 Total 256 37 75 97 465 24 46 (**) The trade-wise/category-wise number of vacancies against the Examiner (Engg) are as follows: UR OBC SC ST Total OH HH VH Ex- Matriculation + SM NAC/NTC in Machinist as Examiner(Engg) 2 0 1 0 3 1 0 0 1 Machinist Fitter General (Mech) as Examiner(Engg) Turner as Examiner (Engg) Fitter Electronics as Examiner(Engg)

DBW as Examiner (Engg)

OBC

SC

ST

Total

19

0

9

10

38

0

4

0

4 Fitter

1 1

0 0

0 0

1 1

2 2

0 0

0 0

0 0

4

0

2

2

8

0

0

0

0 Turner 0 Electronics Mechanic, Mechanic Mechatronics, Mechanic Industrial Electronics, Mechanic (Embedded Systems and PLC), Mechanic Power Electronics (Inverters, UPS and Maintenance of Drives) 0 Attendant Operator Chemical Plant,Process Plant Operator


Page 28 of 46 STATE: ORISSA 15. Ordnance Factory Bolangir (OFBOL) Trade UR

OBC

SC

ST

PH Ex-SM OH HH VH Note: Candidates who wish to apply for more than one trade [for e.g. Machinist and Examiner (Engg) both] should exercise their preference of trade while applying online, subject to eligibility. Candidates who wish to apply for DBW and Examiner (Engg)-DBW should exercise their preference of trade while applying online, subject to eligibility. While applying online, PH Candidates should ensure their eligibility for the trades by going through Annexure‘D’.


Total

Page 29 of 46 STATE: TAMIL NADU 16. Engine Factory Avadi (EFA) Trade UR Electrician Fitter General (Mech) Heat Treatment Operator Machinist Total

0 0 3 0 3

OBC 0 1 2 1 4

SC

ST

0 0 1 0 1

Total

1 0 0 0 1

OH 0 0 0 0 0

1 1 6 1 9

PH HH 0 0 0 0 0

Ex-SM VH 0 0 0 0 0

0 0 0 0 0

STATE: TAMIL NADU 17. Heavy Alloy Penetrator Project (HAPP) Trade Electroplater Electrician Fitter Electronics Total

UR 0 2 1 3

OBC 0 0 0 0

SC

ST

0 1 0 1

Total

1 0 0 1

1 3 1 5

OH 0 0 0 0

PH HH 0 0 0 0

Ex-SM VH 0 0 0 0

0 0 0 0

STATE: TAMIL NADU 18. Heavy Vehicle Factory (HVF) Trade

UR

OBC

SC

ST

Total

PH OH

HH

Ex-SM VH

Electrician 8 6 6 0 20 1 0 0 Examiner (Engg) ** 9 14 7 0 30 1 1 0 Fitter AFV 3 0 0 0 3 0 0 0 Fitter Electronics 0 6 7 0 13 0 0 0 Fitter General (Mech) 18 12 7 1 38 1 2 4 Heat Treatment Operator 12 7 3 0 22 0 0 0 Machinist 27 37 22 2 88 1 4 4 OMHE (Operator Material 30 10 4 0 44 0 0 0 Handling Equipment) Painter 2 0 0 0 2 0 0 0 Rigger 25 5 0 0 30 0 0 0 Welder 0 1 1 0 2 1 0 0 Total 134 98 57 3 292 5 7 8 (**) The trade-wise/category-wise number of vacancies against the Examiner (Engg) are as follows: UR OBC SC ST Total OH HH VH Ex- Matriculation + SM NAC/NTC in Fitter General (Mech) as 5 8 4 0 17 1 1 0 2 Fitter Examiner(Engg) Machinist as Examiner(Engg) 1 3 1 0 5 0 0 0 0 Machinist Electrician, Wireman, Cable Electrician as Examiner (Engg) 2 3 1 0 6 0 0 0 1 ter, Winder (Armature), Mechanic (HT, LT


2 3 1 1 4 2 9 5 0 3 0 30

Page 30 of 46 STATE: TAMIL NADU 18. Heavy Vehicle Factory (HVF) Trade

UR

OBC

SC

ST

Total

PH

Ex-SM

Equipments and Cable ting), Electrical Mechanic, Mechanic Electrical Maintenance (Industrial Automation), Mechanic (Repair and Maintenance of instruments used in Electrical Engineering) Welder (Gas & Electric), Welder (Gas & Arc), Gas Cutter, TIG/MIG Welder as Examiner(Engg) 1 0 1 0 2 0 0 0 0 Welder, Structural Welder, Welder (Pipe and Pressure Vessels), Advance Welder Note: Candidates who wish to apply for more than one trade [for e.g. Machinist and Examiner (Engg) both] should exercise their preference of trade while applying online, subject to eligibility. While applying online, PH Candidates should ensure their eligibility for the trades by going through Annexure-‘D’.

STATE: TELANGANA 19. Ordnance Factory Medak (OFMK) PH Trade Electrician Examiner (Engg) ** Fitter Auto Grinder Machinist Miller Millwright Turner Welder Fitter Electric Fitter General (Mech) Total

UR 5 7 2 4 6 4 3 11 13 2 16 73

OBC 2 4 2 1 2 2 0 5 6 0 8 32

SC 1 1 0 1 1 3 0 4 3 0 4 18

ST 1 0 1 1 0 1 0 2 1 1 2 10

Total 9 12 5 7 9 10 3 22 23 3 30 133

OH

HH

VH

Ex-SM

4# 13

0 0

0 0 4

0 0 13

(**) The trade-wise/category-wise number of vacancies against the Examiner (Engg) are as follows: UR OBC SC ST Total OH HH VH Ex- Matriculation + SM NAC/NTC in Fitter General (Mech) as 2 1 1 0 4 0 0 0 0 Fitter Examiner(Engg)


Page 31 of 46 STATE: TELANGANA 19. Ordnance Factory Medak (OFMK) PH Trade Machinist as Examiner(Engg) Turner as Examiner (Engg) Welder as Examiner(Engg)

UR 1 1 1

OBC SC 0 0 0 0 0 0

HH VH Ex-SM 1 2 0 Machinist 2 3 0 Turner 2 3 0 Welder (Gas & Electric), Welder (Gas & Arc), Gas Cutter, TIG/MIG Welder, Structural Welder, Welder (Pipe and Pressure Vessels), Advance Welder Note: Candidates who wish to apply for more than one trade [for e.g. Machinist and Examiner (Engg) both] should exercise their preference of trade while applying online, subject to eligibility. (#)- 4-OH/HH/VH vacancies reserved for the aforementioned trades as per physically disabled category suitable for the jobs. While applying online, PH Candidates should ensure their eligibility for the trades by going through Annexure-‘D’.


ST

Total 0 0 0 0 0 0

OH 0 0 0

Page 32 of 46 STATE: UTTARAKHAND 20. Ordnance Factory Dehradun (OFDUN) Trade UR OBC

SC

ST

Total

PH HH

Ex-SM

OH VH Optical Worker 18 3 5 1 27 0 Turner 3 0 1 0 4 0 Fitter instruments 31 4 8 1 44 0 Fitter General (Mech) 3 0 1 0 4 0 Machinist 15 2 6 0 23 0 Electroplater 1 0 0 0 1 0 Painter 4 0 1 0 5 0 1# 1# 22 Moulder 1 0 0 0 1 0 Carpenter 0 0 1 0 1 0 Electrician 2 1 1 0 4 0 Grinder 3 0 0 0 3 0 Mason 2 0 0 0 2 0 Millwright 2 0 1 0 3 0 Labour 6 6 4 0 16 0 0 0 1 Total 91 16 29 2 138 0 1 1 23 (#)- 1-HH and 1-VH vacancies reserved for the aforementioned trades as per physically disabled category suitable for the jobs. While applying online, PH Candidates should ensure their eligibility for the trades by going through Annexure-‘D’.


Page 33 of 46 STATE: UTTARAKHAND 21. Opto Electronics Factory, Raipur Dehradun (OLF) Trade UR OBC SC

ST

Total

PH Ex-SM OH HH VH Electrician 2 0 0 0 2 0 0 0 0 Examiner (Engg) ** 16 3 5 1 25 0 0 0 3 Examiner (Optical) 11 1 1 0 13 0 0 0 1 Fitter Electronics 29 3 1 2 35 1 1 0 6 Fitter Instruments 18 5 5 0 28 0 1 0 3 Machinist 21 0 2 2 25 0 0 2 2 Millwright 2 0 0 0 2 0 0 0 0 Optical worker 10 3 6 1 20 0 0 0 0 Turner 8 1 1 0 10 1 0 0 1 Total 117 16 21 6 160 2 2 2 16 (**) The trade-wise/category-wise number of vacancies against the Examiner (Engg) are as follows: UR OBC SC ST Total OH HH VH Ex- Matriculation + SM NAC/NTC in Machinist as 3 0 1 0 4 0 0 0 Machinist Examiner(Engg) Turner as 2 0 0 0 2 0 0 0 Turner Examiner(Engg) Fitter General (Mech) as 2 0 1 0 3 0 0 0 Fitter Examiner(Engg) Instrument Fitter Instruments Mechanic, Advance 3 0 1 0 4 0 0 0 as Examiner(Engg) Mechanic (Instruments) Electronics Mechanic, 3 Mechanic Mechatronics, Mechanic Industrial Fitter Electronics, Electronicsas 6 3 2 1 12 0 0 0 Mechanic Examiner(Engg) (Embedded Systems and PLC), Mechanic Power Electronics (Inverters, UPS and Maintenance of Drives) Note: Candidates who wish to apply for more than one trade [for e.g. Machinist and Examiner (Engg) both] should exercise their preference of trade while applying online, subject to eligibility. While applying online, PH Candidates should ensure their eligibility for the trades by going through Annexure‘D’.


Page 34 of 46 STATE: UTTAR PRADESH 22. Field Gun Factory Kanpur (FGK) Trade UR

OBC

SC

ST

Total

PH OH

Boiler Attendant

1

1

0

0

2

Fitter General (Mech)

6

2

2

0

10

Fitter Electronics

2

1

1

0

4

Machinist

5

3

2

0

10

Millwright

4

1

1

0

6

Welder

3

1

0

0

4

Black Smith

7

3

2

0

12

Melter (F/NF)

24

13

10

0

47

Total

52

25

18

0

95

HH

Ex-SM VH

3 9

0 0

0 0

0 0

9 3 (#)- 3 PH vacancies reserved for the aforementioned trades as per physically disabled category suitable for the jobs. While applying online, PH Candidates should ensure their eligibility for the trades by going through Annexure-‘D’.


Page 35 of 46 STATE: UTTAR PRADESH 23. Ordnance Factory Kanpur (OFC) Trade UR OBC W (Chemical Process Worker) Fitter Auto Fitter Electric Fitter Electronics OMHE (Operator Material Handling Equipment) Heat Treatment Operator Welder Electrician Examiner (Engg) ** Millwright Painter Turner Fitter General (Mech) Machinist Total

SC

ST

Total

PH HH 0

VH 0

Ex-SM

5

3

2

0

10

OH 0

1 0 0 6

0 1 1 2

0 0 0 2

0 0 0 0

1 1 1 10

0 0 0 0

0 0 0 0

0 0 0 0

6 1 26 26 33 5 19 16 115 259

2 0 13 14 15 3 12 7 60 133

2 0 12 10 11 2 3 5 53 102

0 0 1 0 1 0 1 0 2 5

10 1 52 50 60 10 35 28 230 499

0 0 1

0 0 0

0 0 0 0 0 0 0

4 1 2 3 2 4 17

49

49

(**) The trade-wise/category-wise number of vacancies against the Examiner (Engg) are as follows: UR OBC SC ST Total OH/HH VH ExMatriculation + SM NAC/NTC in Machinist as Examiner(Engg) 11 5 4 0 20 0 Machinist Fitter General (Mech) as 5 3 2 0 10 0 Fitter Examiner(Engg) Turner as Examiner(Engg) 5 3 2 0 10 0 Turner Millwright Maintenance Mechanic, 0 Mechanic 4 5 Machine Tool Maintenance, Millwright as Examiner(Engg) 5 3 2 0 10 Mechanic Advanced Machine Tool Maintenance, mechanic mechatronics Note: Candidates who wish to apply for more than one trade [for e.g. Machinist and Examiner (Engg) both] should exercise their preference of trade while applying online, subject to eligibility. While applying online, PH Candidates should ensure their eligibility for the trades by going through Annexure‘D’.


Page 36 of 46 STATE: UTTAR PRADESH 24. Ordnance Factory Muradnagar (OFM) Trade UR OBC SC ST Total 2OH Electrician Fitter General (Mech) Machinist Mason Pattern Maker Moulder Fitter Electronics Examiner (Engg) ** Millwright Painter Turner Welder Heat Treatment Operator

8 23 16 4 1 17 2 5 1 1 3 5 2

4 13 8 2 0 8 0 3 0 1 2 3 1

3 9 7 1 1 7 1 2 1 0 1 1 1

0 0 0 0 0 0 0 0 0 0 0 0 0

15 45 31 7 2 32 3 10 2 2 6 9 4

Melter (F/NF)

12

7

5

0

OMHE (Operator Material Handling Equipment)

4

2

1

0

PH 1HH

Ex-SM 2VH

Total PH = 5 # 0 0 0 0

Total PH = 5 #

0

0

0

24

0

0

0

7

0

0

0

20

Total 102 53 38 0 193 2 1 2 20 (**) Qualification for Machinist as Examiner (Engg) Trade will be Matriculation + NAC/NTC in the Machinist trade only. Note: Candidates who wish to apply for more than one trade [for e.g. Machinist and Examiner (Engg) both] should exercise their preference of trade while applying online, subject to eligibility. (#)- 5 PH vacancies reserved for the aforementioned trades as per physically disabled category suitable for the jobs. While applying online, PH Candidates should ensure their eligibility for the trades by going through Annexure-‘D’.

STATE: WEST BENGAL 25. Metal and Steel Factory, Kolkata (MSF) Trade UR OBC

SC

ST

Total OH

PH HH

Ex-SM VH

Black Smith 18 8 8 2 36 5 Electrician 11 5 6 0 22 5 Electroplater 4 0 0 0 4 0 1 1 1 Fitter Instruments 3 0 0 0 3 1 Machinist 24 8 10 0 42 6 Millwright 9 5 2 1 17 9 Welder 1 0 0 0 1 0 Total 70 26 26 3 125 1 1 1 26 While applying online, PH Candidates should ensure their eligibility for the trades by going through Annexure‘D’.


Page 37 of 46

ANNEXURE-‘B’ S.NO.

POST/TRADE

NAC/NTC TRADE TO BE CONSIDERED

1.

Black Smith

Moulder, Foundryman, Forger & Heat Treater

Moulder, Foundryman, Forger & Heat Treater

2. 3. 4. 5.

Boiler Attendant Fitter Boiler Carpenter W (Chemical Process Worker)

Boiler Attendant Boiler Attendant Carpenter Attendant Operator Chemical Plant, Process Plant Operator

6.

DBW (Danger Building Worker)

Attendant Operator Chemical Plant, Process Plant Operator

7.

Examiner (Filling)


Boiler Attendant Boiler Attendant Carpenter Attendant Operator Chemical Plant, Process Plant Operator Attendant Operator Chemical Plant, Process Plant Operator

8.

DBW (Danger Building Worker)


9.

Examiner (DBW)


10. Electrician

Electrician, Wireman, Cable ter, Winder (Armature), Mechanic (HT, LT Equipments and Cable ting), Electrical Mechanic, Mechanic Electrical Maintenance (Industrial Automation), Mechanic (Repair and Maintenance of instruments used in Electrical Engineering)

11. Fitter Electric

Electrician, Wireman, Cable ter, Winder (Armature), Mechanic (HT, LT Equipments and Cable ting), Electrical Mechanic, Mechanic Electrical Maintenance (Industrial Automation), Mechanic (Repair and Maintenance of instruments used in Electrical Engineering)

12. Electroplater

Electroplater


NUMBER OF APPLICATION CONSIDERED FOR MORE THAN ONE TRADES (*)

Single application for DBW & Examiner(Filling) Single application for DBW & Examiner(DBW)

EXAM SYLLABUSNTC/NAC SYLLABUS OF

Attendant Operator Chemical Plant, Process Plant Operator Electrician, Wireman, Cable ter, Winder (Armature), Mechanic (HT, LT Equipments and Cable ting), Electrical Mechanic, Mechanic Electrical Maintenance (Industrial Automation), Mechanic (Repair and Maintenance of instruments used in Electrical Engineering) Electrician, Wireman, Cable ter, Winder (Armature), Mechanic (HT, LT Equipments and Cable ting), Electrical Mechanic, Mechanic Electrical Maintenance (Industrial Automation), Mechanic (Repair and Maintenance of instruments used in Electrical Engineering) Electroplater

Page 38 of 46 S.NO.

POST/TRADE


13. Examiner (Proof & Test)

Attendant Operator Chemical Plant, Instrument Mechanic (Chemical Plant), Laboratory Assistant (Chemical Plant), Chemical Laboratory Assistant, Process Plant Operator

14. Fitter AFV

Fitter, Mechanic Automobile (Advance Petrol Engine), Mechanic Automobile (Advance Diesel Engine)

15. Fitter Auto

Mechanic (Repair and Maintenance of Heavy Vehicles), Mechanic (Repair and Maintenance of Light Vehicles), Mechanic (Motor Vehicle), Mechanic Diesel, Mechanic Automobile (Advance Diesel Engine), Mechanic Automobile (Advance Petrol Engine)

16. Fitter Auto Electric

Auto Electrician, Mechanic Auto Electronics, Mechanic Auto Mobile Electronics

17. Fitter Electronics

Electronics Mechanic, Mechanic Mechatronics, Mechanic Industrial Electronics, Mechanic (Embedded Systems and PLC), Mechanic Power Electronics (Inverters, UPS and Maintenance of Drives)

18. Fitter General (Mech) 19. Fitter Instruments

Fitter

20. Fitter pipe

Plumber, Pipe Fitter

Instrument Mechanic, Advance Mechanic (Instruments)




Attendant Operator Chemical Plant, Instrument Mechanic (Chemical Plant), Laboratory Assistant (Chemical Plant), Chemical Laboratory Assistant, Process Plant Operator Fitter, Mechanic Automobile (Advance Petrol Engine), Mechanic Automobile (Advance Diesel Engine) Mechanic (Repair and Maintenance of Heavy Vehicles), Mechanic (Repair and Maintenance of Light Vehicles), Mechanic (Motor Vehicle), Mechanic Diesel, Mechanic Automobile (Advance Diesel Engine), Mechanic Automobile (Advance Petrol Engine) Auto Electrician, Mechanic Auto Electronics, Mechanic Auto Mobile Electronics Electronics Mechanic, Mechanic Mechatronics, Mechanic Industrial Electronics, Mechanic (Embedded Systems and PLC), Mechanic Power Electronics (Inverters, UPS and Maintenance of Drives) Fitter Instrument Mechanic, Advance Mechanic (Instruments) Plumber, Pipe Fitter

Page 39 of 46 S.NO.

POST/TRADE


21. Fitter Refrigeration

Refrigeration and Air-Conditioning Mechanic, Mechanic (Domestic, Commercial Refrigeration and Air Conditioning Machines), Mechanic (Central Air Conditioning Plant, Industrial cooling and Package Air Conditioning)

22. Examiner (Engg) Grinder 23. Grinder

Machinist (Grinder)

24. Heat Treatment Operator 25. Examiner (Engg) Machinist 26. Machinist

Forger & Heat Treater

27. Examiner (Engg) Miller

Machinist, Machinist (Grinder), Turner

28. Miller


29. Examiner (Metals)

Foundryman, Forger & Heat Treater, Steel Melting Hand

30. Examiner Metallography

Foundryman, Forger & Heat Treater, Steel Melting Hand

31. Mason

Mason (Building Constructor), Building Constructor

32. Millwright

Millwright Maintenance Mechanic, Mechanic Machine Tool Maintenance, Mechanic Advanced Machine Tool Maintenance, mechanic mechatronics

Machinist (Grinder)

Machinist Machinist



Single Application for Grinder and Examiner (Grinder)


Refrigeration and AirConditioning Mechanic, Mechanic (Domestic, Commercial Refrigeration and Air Conditioning Machines), Mechanic (Central Air Conditioning Plant, Industrial cooling and Package Air Conditioning) Machinist (Grinder)

Forger & Heat Treater Single Application for Machinist and Examiner (Machinist) Single Application for Miller and Examiner (Miller)

Machinist


Foundryman, Forger & Heat Treater, Steel Melting Hand Foundryman, Forger & Heat Treater, Steel Melting Hand Mason (Building Constructor), Building Constructor Millwright Maintenance Mechanic, Mechanic Machine Tool Maintenance, Mechanic Advanced Machine Tool Maintenance, mechanic mechatronics

Page 40 of 46 S.NO.

POST/TRADE

33. Moulder 34. Melter (F/NF) 35. Examiner- (Optical) 36. Optical worker


Moulder Foundryman, Moulder, Steel Melting Hand Optical Worker Optical Worker

37. OMHE (Operator Material Handling Equipment)

Material Handling Equipment Machine-cum-operator, Crane Operator (Overhead Steel Industry), Operator Material Handling at raw material Handling Plant

38. Painter 39. Pattern Maker

Painter (General) Pattern Maker, Computer aided Pattern Maker

40. Rigger

Rigger, Rigger (Engineering & Chemical Industries)

41. Sheet Metal Sheet Metal Worker Worker 42. Examiner (Clothing) Tailor (Men) , Tailor (Women), Tailor (General), Cutting and Tailoring, Cutting and Sewing , Shirts and Tros Maker 43. Tailor

44. Examiner (Engg)Turner 45. Turner

46. Tool Maker

Tailor (Men) , Tailor (Women), Tailor (General), Cutting and Tailoring, Cutting and Sewing, Shirts and Tros Maker Turner Turner

Tool and Die-Maker, Tool and Die Maker (Press Tools, Jigs and Fixtures), Tool and Die Maker (Die and Moulds), Jigs and Fixtures Maker



Single Application for Optical Worker and Examiner(Optical)


Moulder Foundryman, Moulder, Steel Melting Hand Optical Worker

Material Handling Equipment Machinecum-operator, Crane Operator (Overhead Steel Industry), Operator Material Handling at raw material Handling Plant Painter (General) Pattern Maker, Computer aided Pattern Maker Rigger, Rigger (Engineering & Chemical Industries) Sheet Metal worker Single Application for Tailor and Examiner(Clothing)

Tailor (Men) , Tailor (Women), Tailor (General), Cutting and Tailoring, Cutting and Sewing, Shirts and Tros Maker

Single Application for Turner and Examiner(Turner)

Turner

Tool and Die-Maker, Tool and Die Maker (Press Tools, Jigs and Fixtures), Tool and Die Maker (Die and Moulds), Jigs and Fixtures Maker

Page 41 of 46 S.NO.

POST/TRADE


47. Examiner (Engg) Welder

Welder (Gas & Electric), Welder (Gas & Arc), Gas Cutter, TIG/MIG Welder, Structural Welder, Welder (Pipe and Pressure Vessels), Advance Welder

48. Welder

Welder (Gas & Electric), Welder (Gas & Arc), Gas Cutter, TIG/MIG Welder, Structural Welder, Welder (Pipe and Pressure Vessels), Advance Welder Xth Standard

49. Labour

NUMBER OF APPLICATION CONSIDERED FOR MORE THAN ONE TRADES (*) Single Application for Welder and Examiner(Welder)


Welder (Gas & Electric), Welder (Gas & Arc), Gas Cutter, TIG/MIG Welder, Structural Welder, Welder (Pipe and Pressure Vessels), Advance Welder As given in Annexure C

Note: 1. The candidate is required to make an informed decision and apply accordingly against ONE post/trade of one factory only, subject to eligibility as given above. 2. Please note that if candidates wish to apply for more than one trade (wherever applicable as mentioned in the above table as “Single Application”), candidates must give their choice of trade in the order of preference among the options,while filling the online application. Candidates will be emled based on merit-cum-choice subject to suitability. Post allotted to a candidate at first opportunity of emment shall not be reviewed/revised/re-allotted under any circumstances. 3. In all other situations as per the table given, wherever a candidate may be eligible for more than one trade/post as per his/her NAC/NTC qualification, the candidate shall be eligible to apply against one trade/post/factory only.


Page 42 of 46

ANNEXURE-‘C’ SCHEME & SYLLABUS OF EXAMINATION SCHEME: 1. There will be a written examination of one paper. The paper will be of "Objective-Multiple-choicetype" of maximum 100 marks. 2. The paper will consist of two parts: a. PART -A will consist of 20 marks having questions on General Science and Quantitative Aptitude, each having weightage of 10 marks. The question will be of up to 10th Standard. b. PART - B will consist of 80 marks of NCVT syllabus for the relevant trade. 3. All the Questions will be compulsory. There will be no negative marking for wrong answer. 4. The subject of the written examination, the maximum marks allotted to each paper, no of questions andthe time allowed is given in the table below:Subject

No. of Questions

Part A (Objective Type)

1.General Science (10 Questions) 2. Quantitative Aptitude (10 Questions) 80 Questions

Part B (Objective Type) Questions from the NCVT Syllabus of relevant trade Total 100 Questions

Maximum Time Total Duration/ Marks allowed Timing for candidates eligible to utilize the facilities of a scribe (at S. No 6 under 12.4) 10 Marks 10 Marks 80 Marks

2 hrs

2 Hours 40 minute

100 Marks

Note: 1. The paper would be required to be answered in OMR sheets. 2. Candidates would be required to darken the circles in the OMR sheet with black pen. OMR sheets marked in pencil would be rejected outright. 3. No marks would be allotted for questions in which multiple darkening has been done in the OMR Sheet. SYLLABUS: A. General Science (10 Questions) Question will be aimed at testing the candidate's General Awareness of the environment around him. Question will also be designed to test knowledge of basic science studied upto 10 th standard and would include such matters of every day observations and experience as may be expected of any educated person. B. Quantitative Aptitude (10 Questions)


Page 43 of 46

The candidate will be tested for general mathematics of upto 10 th Standard involving number systems, equations in two variables, simple and compound interest, perimeter, area and volume of geometrical figures, Direct and inverse proportions, Pythagoras theorem and trigonometry. C. NCVT Trade (80 Questions): Questions from the NCVT Syllabus of relevant trade. D. Trade Test: The syllabus for trade test (Practical) will be as per trade test specification of semiskilled grade of the relevant trade, trade test will be merely qualifying nature. It will not decide the merit of the selected candidates. The merit will be decided solely based of the results of written examination. E. There shall be no interview for filling up of these vacancies. LABOUR POSTS SCHEME (XTH STANDARD LEVEL) Subject

Maximum Marks

Number of Questions

Numerical Aptitude (Objective Type) Science (Objective Type) General

40

40

30

30

General Awareness (Objective Type)

30

30

100

100

TotalMarks

Duration Total duration/ Timing for candidates utilizing the facilities of a scribe

2Hours

2 Hours 40 minute

SYLLABUS FOR WRITTEN TEST 1. Numerical Aptitude 2. Number Systems 3. Fractions, Decimals and Percentage 4. Ratio and proportion 5. Averages 6. Interest, Profit & Loss, Discount 7. Time & Distance, Time & Work GENERAL SCIENCE The questions on science may be set keeping in view the standard appropriate to High School. Questions may include subjects and activities which are more relevant to day-to-day existence/activities of human life. GENERAL AWARENESS 1. Current events-National & International 2. History & Culture 3. General polity and Indian Constitution 4. General Geography


Page 44 of 46

The question paper for the written examination shall be set in Hindi, English and the local language. TRADETEST As per trade test specifications, an unskilled workman will be mainly engaged on handling/shifting of material. He will also be required to clean machines, floors of shop/areas around machines and other similar places, if and as necessary. The trade test may be designed accordingly to test the aptitude of the candidate. However, this test will be of qualifying nature only.  Final grading will be decided based only on marks obtained in written test subject to qualifying in the prescribed trade test.  There shall be no interview for filling up of these vacancies.


Page 45 of 46

ANNEXURE-‘D’ POSTS IDENTIFIED SUITABLE FOR PHYSICALLY DISABLED CATEGORY ALONG WITH THE PHYSICAL REQUIREMENTS AND FUNCTIONAL CLASSIFICATIONS

S.NO. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. 37. 38.

POST/TRADE Black Smith Boiler Attendant Fitter Boiler Carpenter W (Chemical Process Worker) Examiner (Filling) DBW (Danger Building Worker) Examiner (DBW) Electrician Fitter Electric Electroplater Examiner (Proof & Test) Fitter AFV Fitter Auto Fitter Auto Electric Fitter Electronics Fitter General (Mech) Fitter Instruments Fitter pipe Fitter Refrigeration Examiner (Engg) -Grinder Grinder Heat Treatment Operator Examiner (Engg) Machinist Machinist Examiner (Engg) - Miller Miller Examiner (Metals) Examiner Metallography Mason Millwright Moulder Melter (F/NF) Examiner- (Optical) Optical worker OMHE (Operator Material Handling Equipment Painter Pattern Maker

PHYSICAL REQUIREMENT -S, ST, W, MF, SE, RW, H ST, SE, MF B, KC, SE, S, ST, L --

CATEGORIES OF DISABLED SUITABLE FOR THE JOB -OL, LV OL,BL,HH,LV OL --

S, ST, W, KC, MF, SE --

OL,BL,HH --

S, ST, W, KC, MF, SE S, ST, W, L, MF ST, SE, MF S, ST, W, MF, SE, RW, H S, ST, W, KC, MF, SE ST, SE, MF ST, SE, MF ST, SE, MF ST, SE, MF ST, SE, MF ST, SE, MF ST, SE, MF ST, SE, MF S, ST, W, KC, MF, SE ST, SE, MF -S, ST, W, KC, MF, SE

OL,BL,HH OL,BL OL,BL,HH,LV OL,BL,HH OL,BL,HH OL,BL,HH,LV OL,BL,HH,LV OL,BL,HH,LV OL,BL,HH,LV OL,BL,HH,LV OL,BL,HH,LV OL,BL,HH,LV OL,BL,HH,LV OL,BL,HH OL,HH,LV -OL,BL,HH

ST, SE, MF S, ST, W, KC, MF, SE ST, SE, MF S, ST, W, KC, MF, SE S, ST, W, KC, MF, SE -S, ST, W, PP, KC, BN, MF --S, ST, W, KC, MF, SE ---

OL,HH,LV OL,BL,HH OL,HH,LV OL,BL,HH OL,BL,HH -OL,HH

S, ST, SE, MF, BN --

OL,HH --


--OL,BL,HH ---

Page 46 of 46

S.NO. 39. 40. 41. 42. 43. 44. 45. 46. 47. 48.

POST/TRADE Rigger Sheet Metal Worker Examiner (Clothing) Tailor Examiner (Engg)- Turner Turner Tool Maker Examiner (Engg) -Welder Welder Labourer

PHYSICAL REQUIREMENT -S, ST, SE, L, MF, BN S, ST, W, KC, MF, SE S, ST, SE, MF S, ST, W, KC, MF, SE ST, SE, MF -S, ST, W, KC, MF, SE S or ST, SE, MF, BN S, BN, MF, SE, PP, L, N, MF

CATEGORIES OF DISABLED SUITABLE FOR THE JOB -OL,HH OL,BL,HH BL,OL,HH OL,BL,HH OL,HH -OL,BL,HH OL,HH OA, BL, OL, HH

Abbreviations used: S=Sitting, ST=Standing, W=Walking, BN=Bending, CRL=Crawling, CL=Climbing, JU=Jumping, L=Lifting, KC=KneeIing&Crouching, RW=Reading & Writing, MF=Manipulation by Fingers, PP=Pulling & Pushing, SE=Seeing, C=Communication, H=Hearing, OA=One Arm, BA=Both Arms, OAL=One Arm and One Leg, BLA=Both Legs & Arms, BLOA=Both leg & one Arm, OL=One Leg, BL=Both Leg, =Cerebral Palsy, LC=Leprosy Cured, OH=Orthopedically Impaired, VH=Visually Impaired, B=Blind, LV=Low Vision, HH=Hearing Impaired.


Indian Ordnance Factory Recruitment 2017 2018f

Overview 6h3y3j

More details h6z72

Related Documents 543cg

Indian Ordnance Factory Recruitment 2017 2018f

Indian Ordnance Factory Recruitment 2014 Www.ofb.gov 1i316

Patriot Ordnance Factory V. Hogan Manufacturing 1r6l9

Proposal Teaching Factory 2017 3e3n2l

Nlc Recruitment 2017 23245o

Ibps Recruitment 2017-18 6j2x6a

More Documents from "Kshitija" w6b2r

Rbi Recruitment Grade B Officers (official Notification) 5z171b

Thane District Central Cooperative Bank Recruitment Official Notification 282i5l

Nlc Recruitment 2017 23245o

Indian Ordnance Factory Recruitment 2017 2018f

Sbi Sme Recruitment Official Notification 2017 3cq6n