How To Install And Configure Forefront Tmg 2010 —-step By Step _ Information Technology Blog.pdf 8yr

Forefront TMG 2010: How to install and configure Forefront TMG 20...

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

Information Technology Blog By Raihan Al-Beruni

Forefront TMG 2010: How to install and configure Forefront TMG 2010 —-Step by step About these ads (h p://en.wordpress.com/about-these-ads/)

i 115 Votes Forefront TMG 2010 has been built on top of the core capabilities delivered in Microsoft Internet Security and Acceleration (ISA) Server 2004/2006 in order to deliver a comprehensive, enhanced and integrated network security gateway. Forefront TMG provide additional protection capabilities to help secure the corporate network from external/Internet-based threats. Forefront TMG 2010 prevent abuse of networks from internal and external entity. Forefront provide more management capabilities in security and protection. Forefront TMG 2010 is available in Standard Edition and Enterprise Edition. Standard version does not Array/NLB/CARP and Enterprise Management. For E-mail Protection both version requires Exchange license. Forefront TMG 2010 provide the following enhanced protection capabilities: Malware inspection URL ltering HTTP ltering HTTPS inspection E-mail protection Network Inspection Systems (NIS) Intrusion detection and prevention Secure routing and VPN

Understanding Network Topology The following Forefront TMG network topologies are available:

1 of 68

08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

o Edge rewall—In this topology, Forefront TMG is located at the network edge, where it serves as the organization’s edge rewall, and is connected to two networks: the internal network and the external network (usually the Internet).

(h p://araihan. les.wordpress.com /2010/04/layoutlargeedge.png) o 3-Leg perimeter—This topology implements a perimeter (DMZ) network. Forefront TMG is connected to at least three physical networks: the internal network, one or more perimeter networks and the external network.

/2010/04/layoutlarge3leg.png)

2 of 68

(h p://araihan. les.wordpress.com

o Back rewall—In this topology, Forefront TMG is located at the network’s back-end. Use this topology when another network element, such as a perimeter network or an edge security device, is located between Forefront TMG and the external network. Forefront TMG is connected to the internal network and to the network element in front of it.

(h p://araihan. les.wordpress.com

08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

/2010/04/layoutlargeback.png) (h p://araihan. les.wordpress.com/2010/04/layoutlargefront.png) o Single network adapter—This topology enables limited Forefront TMG functionality. In this topology, Forefront TMG is connected to one network only, either the internal network or a perimeter network. Typically, you would use this con guration when Forefront TMG is located in the internal corporate network or in a perimeter network, and another rewall is located at the edge, protecting corporate resources from the Internet.

/2010/04/layoutlargesnm.png)

(h p://araihan. les.wordpress.com

Functionality of a single network adapter topology The single network adapter topology enables limited Forefront TMG functionality, that includes: o Forward (CERN) proxy for HTTP, HTTPS, and CERN proxy FTP ( only). o Web caching for HTTP and CERN proxy FTP. o Web publishing. HTTP-based communications, such as Microsoft O ce SharePoint Server, Exchange Outlook Web Access 2007, ActiveSync®, and remote procedure call (RPC) over HTTP (Outlook Anywhere, Terminal Services Gateway or WSMAN-based tra c). o Dial-in client virtual private network (VPN) access.

Limitations of a single network adapter topology The following limitations apply when you use the single network adapter topology:

3 of 68

o Server publishing and site-to-site VPN are not ed. o SecureNAT and Forefront TMG Client tra c are not ed. 08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

o Access rules must be con gured with source addresses that use only internal IP addresses. o Firewall policies must not refer to the external network.

Hardware Requirements Systems requirements depends on number of s and deployment scenario. Forefront TMG is a vital part in a ICT infrastructure. To achieve best performance, you must add best processing power and memory in TMG server however the following will give you an optimum performance. Processor- Intel Xeon (Dual core/Quad-core/i7) or AMD Opteron (dual core/quad core). Intel HyperThreading Technology enabled in bios if Intel server board. RAM-8GB Disk Space –50GB systems partitions and 150GB logging +60GB-100GB Web caching in a separate partition. RAID 5 con g would be highly recommended. NIC- 2 Gigabit NIC with redundant con g (number of NICs depends on deployment scenario) Important! Forefront TMG has been built on 64 architecture.

Operating Systems and features Windows Server 2008 SP2 64 bit or Windows Server 2008 R2 Microsoft .NET Framework 3.5 SP1 Windows Web Services API Network Policy Server. Routing and Remote Access Services. Active Directory Lightweight Directory Services Tools. Network Load Balancing Tools. Windows Power Shell Windows Installer 4.5 Important! It’s not recommended to install any application or programme in TMG server other then antivirus program. It must be a dedicated server for Forefront TMG. Disable unnecessary services after installing operating systems. Install Machine Certi cate from Enterprise Root CA Authority before installing TMG. TMG server must be a member of Active Directory Domain.

Installation of Forefront TMG Prepare a 64 bit Windows Server 2008. Insert Forefront TMG DVD into the server. Run preparation 4 of 68

08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

tools.

(h p://araihan. les.wordpress.com/2010/03/1.jpg) Click continue on UAC authorization prompt.

5 of 68

(h p://araihan. les.wordpress.com/2010/03/2.jpg)

(h p://araihan. les.wordpress.com/2010/03/3.jpg)

(h p://araihan. les.wordpress.com/2010/03/4.jpg)

(h p://araihan. les.wordpress.com/2010/03/5.jpg)

08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

(h p://araihan. les.wordpress.com/2010/03/6.jpg)

(h p://araihan. les.wordpress.com/2010/03/7.jpg)

(h p://araihan. les.wordpress.com/2010/03/8.jpg) Check Launch TMG installation. Click nish.

6 of 68

(h p://araihan. les.wordpress.com/2010/03/9.jpg)

(h p://araihan. les.wordpress.com/2010/03/10.jpg)

08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

(h p://araihan. les.wordpress.com/2010/03/11.jpg)

(h p://araihan. les.wordpress.com/2010/03/12.jpg)

(h p://araihan. les.wordpress.com/2010/03/13.jpg)

(h p://araihan. les.wordpress.com/2010/03/14.jpg)

(h p://araihan. les.wordpress.com/2010/03/15.jpg) Add ranges of internal IP address For example: 10.10.10.1 to 10.10.10.255. You can as many subnet 7 of 68

08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

ranges as you have for internal networks.

8 of 68

(h p://araihan. les.wordpress.com/2010/03/16.jpg)

(h p://araihan. les.wordpress.com/2010/03/17.jpg)

(h p://araihan. les.wordpress.com/2010/03/18.jpg)

(h p://araihan. les.wordpress.com/2010/03/19.jpg)

(h p://araihan. les.wordpress.com/2010/03/20.jpg) 08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

(h p://araihan. les.wordpress.com/2010/03/21.jpg)

(h p://araihan. les.wordpress.com/2010/03/22.jpg)

(h p://araihan. les.wordpress.com/2010/03/23.jpg)

(h p://araihan. les.wordpress.com/2010/03/24.jpg) Open Forefront TMG Management from start menu. TMG will automatically prompt you for initial con guration.

(h p://araihan. les.wordpress.com/2010/03/25.jpg) Step1: Network Setup Wizard—Use to con gure network adapters on the server. Network adapters are associated with a unique Forefront TMG network. Note that you must have static IP address in all NIC of TMG server before you proceed for network se ings.

9 of 68

08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

(h p://araihan. les.wordpress.com/2010/03/26.jpg)

(h p://araihan. les.wordpress.com/2010/03/27.jpg) This is highly important part of con g because in this section you will mention what type of network topology you are going to use. Here, I am con guring De-militarized Zone (DMZ) or 3-Leg Perimeter. You have to select your desired con g.

10 of 68

(h p://araihan. les.wordpress.com/2010/03/28.jpg)

(h p://araihan. les.wordpress.com/2010/03/29.jpg)

08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

(h p://araihan. les.wordpress.com/2010/03/30.jpg)

(h p://araihan. les.wordpress.com/2010/03/31.jpg) In this section, you have to select the behaviour of the tra c among internal, perimeter (DMZ) and external network. For example, My Forefront TMG 2010 server has been con gured to route between internal and perimeter and NAT in between perimeter and external as I choose private networks in perimeter. So that I can hide IP addresses of my perimeter networks.

(h p://araihan. les.wordpress.com/2010/03/32.jpg)

(h p://araihan. les.wordpress.com/2010/03/33.jpg) Step2: System Con guration Wizard—Use to con gure operating system se ings, such as computer name information and domain or workgroup se ings

11 of 68

08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

(h p://araihan. les.wordpress.com/2010/03/38.jpg)

(h p://araihan. les.wordpress.com/2010/03/35.jpg)

(h p://araihan. les.wordpress.com/2010/03/36.jpg)

(h p://araihan. les.wordpress.com/2010/03/37.jpg) Step3: Deployment Wizard—Use to con gure malware protection for Web tra c, and to the customer program and telemetry service.

12 of 68

08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

13 of 68

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

(h p://araihan. les.wordpress.com/2010/03/38.jpg)

(h p://araihan. les.wordpress.com/2010/03/39.jpg)

(h p://araihan. les.wordpress.com/2010/03/40.jpg)

(h p://araihan. les.wordpress.com/2010/03/41.jpg)

08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

14 of 68

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

(h p://araihan. les.wordpress.com/2010/03/42.jpg)

(h p://araihan. les.wordpress.com/2010/03/43.jpg)

(h p://araihan. les.wordpress.com/2010/03/44.jpg)

(h p://araihan. les.wordpress.com/2010/03/45.jpg)

08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

(h p://araihan. les.wordpress.com/2010/03/46.jpg)

Networks, Proxy and Update Configuration Open Forefront TMG Management. On the left hand pan, Select Update Centre. Click con gure se ings on task pan. Set update policy. If you have Windows Server Update Services (WSUS) then you may select WSUS or use Microsoft update services.

(h p://araihan. les.wordpress.com/2010/03/110.jpg) Select networking>Select Networks Tab>Double click on Internal. You will be presented with Internal Properties. Con gure all the tabs as shown below.

(h p://araihan. les.wordpress.com/2010/03/210.jpg)

(h p://araihan. les.wordpress.com/2010/03/34.jpg) In the domain tab, add internal domain(s). For example: *.wolverine.com.au

15 of 68

08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

(h p://araihan. les.wordpress.com/2010/03/47.jpg)

(h p://araihan. les.wordpress.com/2010/03/04.jpg) In the web browser tab, check By Proxy… and Directly Access….

(h p://araihan. les.wordpress.com/2010/03/51.jpg) all your internal IP addresses you added during installation. In this window you can add more internal IP addresses if you want.

16 of 68

(h p://araihan. les.wordpress.com/2010/03/61.jpg) 08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

Check Publish Automatic Discovery information for the network and use port 80 as default.

(h p://araihan. les.wordpress.com/2010/03/71.jpg) In Forefront TMG Client se ings, Check Enable Forefront TMG client for this network. un-check Automatically detect se ings and Use automatic scripts.., Check Use a Web proxy server

(h p://araihan. les.wordpress.com/2010/03/81.jpg) In the Web Proxy Tab, Enable HTTP and use port 80 as default. However, you can use port 8080 if you want. Click on authentication and check integrated. Click on advanced and check unlimited. Now Apply and ok.

17 of 68

(h p://araihan. les.wordpress.com/2010/03/91.jpg)

08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

(h p://araihan. les.wordpress.com/2010/03/101.jpg) Apply changes.

(h p://araihan. les.wordpress.com/2010/03/111.jpg)

(h p://araihan. les.wordpress.com/2010/03/121.jpg) Now repeat all these con g for perimeter networks as you did for internal networks. Connecting Active Directory, DNS and DH Setup connectivity with Microsoft Active Directory, DNS and DH. Click on monitoring>click connectivity veri ers>Click Create New Connectivity Veri er. Create connectivity for Active Directory, DNS and DH.

18 of 68

(h p://araihan. les.wordpress.com/2010/03/131.jpg)

(h p://araihan. les.wordpress.com/2010/03/141.jpg)

08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

(h p://araihan. les.wordpress.com/2010/03/151.jpg) Click Next and Finish. Repeat it for DNS and DH. If you have a upstream Proxy, connect to upstream proxy using similar method. Create HTTP and HTTPS rule By default all access rules are denied. Now Create web access rules for internal networks allowing HTTP and HTTPs tra c through from internal network to external and perimeter. Also allow HTTP and HTTPs tra c through from perimeter to external and internal. Click Firewall Policy>Click Create Access Rule on Task Pan.

19 of 68

(h p://araihan. les.wordpress.com/2010/03/171.jpg)

(h p://araihan. les.wordpress.com/2010/03/181.jpg)

(h p://araihan. les.wordpress.com/2010/03/191.jpg)

08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

20 of 68

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

(h p://araihan. les.wordpress.com/2010/03/201.jpg)

(h p://araihan. les.wordpress.com/2010/03/211.jpg)

(h p://araihan. les.wordpress.com/2010/03/221.jpg)

(h p://araihan. les.wordpress.com/2010/03/231.jpg)

(h p://araihan. les.wordpress.com/2010/03/241.jpg)

08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

(h p://araihan. les.wordpress.com/2010/03/251.jpg)

(h p://araihan. les.wordpress.com/2010/03/261.jpg)

(h p://araihan. les.wordpress.com/2010/03/271.jpg)

(h p://araihan. les.wordpress.com/2010/03/281.jpg) Test Forefront TMG Setup Now moment of truth. Log on to a computer using domain credential in any internal network. Setup proxy in IE connections and browse internet.

21 of 68

08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

(h p://araihan. les.wordpress.com/2010/03/291.jpg)

(h p://araihan. les.wordpress.com/2010/03/301.jpg)

(h p://araihan. les.wordpress.com/2010/03/311.jpg) Thumps UP.

Remote Management Console Installation Forefront TMG is 64 bit but able 32 bit TMG Console available on this Microsoft link (h p://www.microsoft.com/s/details.aspx?FamilyID=e05aecbc-d0eb-4e0fa5db-8f236995bccd&displaylang=en) Insert the Forefront TMG DVD into the DVD drive, or run autorun.hta from the shared network drive. On the main setup page, click Run Installation Wizard. On the Installation Type page, select Forefront TMG Management only. On the Installation Path page, you can change the default installation path.

22 of 68

08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

On the Ready to Install the Program page, click Install. After the installation is complete, if you want to open Forefront TMG Management select Launch Forefront TMG Management when the wizard closes. References: Microsoft Forefront TMG 2010 (h p://www.microsoft.com/forefront/threat-management-gateway /en/us/default.aspx) able TMG Console (h p://www.microsoft.com/s /details.aspx?FamilyID=e05aecbc-d0eb-4e0f-a5db-8f236995bccd&displaylang=en) Interoperability with BranchCache solution guide (h p://technet.microsoft.com/en-us/library /ee658159.aspx) Understanding Service Ports (h p://araihan.wordpress.com/2009/10/08/service-ports-the-entranceto-the-programsapplicationweb-on-your-systems/) Share this on (h p://www.facebook.com/sharer.php?u=h p://araihan.wordpress.com/2010/03 /08/forefront-tmg-2010-how-to-install-and-con gure-forefront-tmg-2010-step-by-step) (h p://digg.com/submit?phase=2&url=h p%3A%2F %2Faraihan.wordpress.com%2F2010%2F03%2F08%2Fforefront-tmg-2010-how-to-installand-con gure-forefront-tmg-2010-step-by-step&title=Forefront%20TMG%202010 %3A%20How%20to%20install%20and%20con gure%20Forefron...) (h p://del.icio.us /post?url=h p%3A%2F%2Faraihan.wordpress.com%2F2010%2F03%2F08%2Fforefront-tmg-2010how-to-install-and-con gure-forefront-tmg-2010-step-by-step&title=Forefront%20TMG%202010 %3A%20How%20to%20install%20and%20con gure%20Forefront%20TMG%202010%20 —-Step%20by%20step) (h p://www.stumbleupon.com/submit?url=h p%3A%2F %2Faraihan.wordpress.com%2F2010%2F03%2F08%2Fforefront-tmg-2010-how-to-installand-con gure-forefront-tmg-2010-step-by-step&title=Forefront%20TMG%202010 %3A%20How%20to%20install%20and%20con gure%20Forefront%20TMG%202010%20 —-Step%20by%20step) (h p://reddit.com/submit?url=h p%3A%2F %2Faraihan.wordpress.com%2F2010%2F03%2F08%2Fforefront-tmg-2010-how-to-installand-con gure-forefront-tmg-2010-step-by-step&title=Forefront%20TMG%202010 %3A%20How%20to%20install%20and%20con gure%20Forefront%20TMG%202010%20 —-Step%20by%20step) (h p://www.blinklist.com/index.php?Action=Blink/addblink.php& Description=&Url=h p%3A%2F%2Faraihan.wordpress.com%2F2010%2F03%2F08%2Fforefronttmg-2010-how-to-install-and-con gure-forefront-tmg-2010-step-bystep&Title=Forefront%20TMG%202010 %3A%20How%20to%20install%20and%20con gure%20Forefront%20TMG%202010%20 —-Step%20by%20step) (h p://twi er.com/home/?status=Forefront%20TMG%202...+%40+h p %3A%2F%2Faraihan.wordpress.com%2F2010%2F03%2F08%2Fforefront-tmg-2010-how-to-installand-con gure-forefront-tmg-2010-step-by-step) (h p://www.technorati.com/faves?add=h p: //araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-install-and-con gure-forefronttmg-2010-step-by-step) (h p://buzz.yahoo.com/buzz?targetUrl=h p%3A%2F %2Faraihan.wordpress.com%2F2010%2F03%2F08%2Fforefront-tmg-2010-how-to-installand-con gure-forefront-tmg-2010-step-by-step&headline=Forefront%20TMG%202010 %3A%20How%20to%20install%20and%20con gure%20Forefront%20TMG%202010%20 —-Step%20by%20step) (h p://www.newsvine.com/_wine/save?u=h p%3A%2F %2Faraihan.wordpress.com%2F2010%2F03%2F08%2Fforefront-tmg-2010-how-to-installand-con gure-forefront-tmg-2010-step-by-step&h=Forefront%20TMG%202010 23 of 68

08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

%3A%20How%20to%20install%20and%20con gure%20Forefront%20TMG%202010%20 —-Step%20by%20step)

This entry was posted on Monday, March 8th, 2010 at 12:09 PM and is led under Forefront TMG 2010, Microsoft Internet Security and Acceleration Server. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.

232 Responses to Forefront TMG 2010: How to install and configure Forefront TMG 2010 —-Step by step

24 of 68

Migrating a single ISA Server to Forefront TMG 2010 Step by Step « Information Technology Blog says: March 10, 2010 at 10:43 AM [...] Information Technology Blog By Raihan Al-Beruni « Forefront TMG 2010: How to install and con gure Forefront TMG 2010 —-Step by step [...] Reply Deepak says: May 6, 2010 at 4:05 AM This is a good resource.. Thanks for posting. Reply Abhilash says: June 4, 2010 at 7:51 PM Great work….thanks for posting Reply Mohsin says: June 7, 2010 at 7:52 PM Great work, Thanks for posting. How do we con gure Multiple TMG servers For redundency? For redundency does both TMG servers needs to be ed in AD? Reply 08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

25 of 68

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

Raihan says: June 8, 2010 at 8:54 AM Hello Mohsin, You need TMG enterprize version. Once you con gured primary TMG server. Then install second one, at the begining of installation it will ask you to with another TMG Array or con guration and storage…. Once the array, it will get all the con g. Both TMG servers must ADDS. Otherwise you will not be able to install certi cates and con gure integrated authentication for internal network. Regards, Raihan Reply How to Con gure Back-to-Back Firewall with Perimeter (DMZ) Topology—–Step by Step Guide « Information Technology Blog says: June 17, 2010 at 3:10 PM [...] add TMG server as a domain member. Install Forefront TMG using Step by Step Guide Lines. Open TMG Management console, Launch Ge ing started Wizard. Con gure network Se ings. Select back [...] Reply Exchange 2010 deployment in di erent rewall scenario « Information Technology Blog says: June 17, 2010 at 3:48 PM [...] Forefront TMG 2010: How to install and con gure Forefront TMG 2010 —-Step by step [...] Reply SAmuel says: August 7, 2010 at 4:21 AM i have forefront tmg install but my reports comes with IP addresses,but i want the reports to come with name from my active directory Reply Raihan says: August 8, 2010 at 7:13 PM Hello Samuel, TMG activity report is a feature available in TMG SP1. Install SP1 using h p://microsoftguru.com.au/2010/08/07/install-forefront-tmg-sp1/ Go to Logs and Report>Task pan> you will see activity report. Before you do that you must connect TMG to AD using conectivity vari er and set integrated authentication. Regards, Raihan Reply kageken says: October 5, 2010 at 8:58 PM yeah i have the veri er for AD and SP1 but still i see empty reports for names but i get the reports for IP Addresses Raihan Al-Beruni says: October 6, 2010 at 10:22 AM I am not clear about your question. What report you want to see?

08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

26 of 68

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

Sami says: August 22, 2010 at 8:34 PM i just want to ask about something ,, how did u do your con guration NICS ? i mean u did something a bit wierd . (at least for me ) your DNS in same range of internal Network , isnt suppose to be in same perimeter network range ? another question .. how i can build my DMZ network with 2 internal network ? the ips of inetnal network are 192.168.1.0/24 the other one is 192.168.2.0/24 what ip should i put to internal NIC ?? Ty Reply Raihan says: August 23, 2010 at 12:18 PM Hello Sami, Screenshots are based on test platform. In real life, 3-leg perimeter/DMZ or Back to back DMZ, internal NIC of TMG points internal DNS server and external NIC of TMG point public DNS server if it’s single server 3 leg perimeter. But if it’s back to back then it should be like my new blog h p://microsoftguru.com.au/2010/06/17/how-to-con gure-back-to-back- rewallwith-perimeter-dmz-topology-step-by-step-guide/ If you can send me your network layout then I can advise with speci c info. 192.168.1.0/24 and 192.168.2.0/24 should be added in the internal network range of TMG. TMG will still have one nic in the internal side not two internal nic. You need to add vlan in layer3 switch or core switch. Please send me details of internal, perimeter and external IPs and layout. Then I advise, you can put x @the end of IP if you dont want to disclose. Reply Randula says: July 20, 2012 at 12:17 PM thanx a lot Reply Mahmood says: August 24, 2010 at 3:31 PM Thanks Raihan Reply Peter says: August 26, 2010 at 1:29 AM Hi, I have the following layout: 10.0.1.x as the internal lan, and eg. 4.4.4.x as the external lan. Now i have a hyperv host that hosts virtual machine for clients, those get 4.4.4.x range. Our internal machines (scvmm, sql, web, internal ad) etc all have 10.0.1.x ips. 08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

27 of 68

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

We also have external AD/dns for our virtual machine clients, hosted on 4.4.4.x net. Where should i put my TMG server? I would like to monitor the tra c from the virtual machines etc too, so i guess they need to go through the TMG as well. Suggestions? Reply Raihan says: August 26, 2010 at 10:32 AM Peter, First I dont understand what you mean by external LAN. Are you talking about external network or you have a 2nd site that you represent external lan? If you clarify these two then I give you right answer for you. whats sort of vm you hosting in hyperv? But my guess#1: TMG for two di erent sites follow my new blog h p://microsoftguru.com.au /2010/08/24/how-to-con gure-site-to-site-vpn-using-forefront-tmg-2010/ in this situation you can put ad/dns/web in second sites and monitor and obtain report from both sites. Your hyperv must physically connecting to that 4.4.4.x vlan so that you add vm to that network. Guess#2: Create a DMZ network for external client (in your language external lan) and placing all of them in that vlan. answer is back to back dmz or 3-leg perimeter. h p://microsoftguru.com.au/2010/06/17/how-to-con gure-back-to-back- rewallwith-perimeter-dmz-topology-step-by-step-guide/ If my guess is wrong then clarify those I mention earlier then I will provide perfect answer. Reply Peter says: August 26, 2010 at 5:41 PM Hi, Thanks for your . Sorry for being unclear about the setup, i’ll clarify here: We have 3 physical servers. 1: Hyperv host contains: - AD01/DNS Internal 10.0.1.10 - AD01/DNS Public 4.4.4.2 2: Hyperv host contains: - AD02/DNS Internal 10.0.1.11 - AD01/DNS Public 4.4.4.3 - SQL Internal 10.0.1.12 - WEB Internal 10.0.1.13 (needs access from internet) - API Internal 10.0.1.14 (needs access from internet) - SQL Internal 10.0.1.15 3. Hyperv host containrs: - Purely virtual servers on 4.4.4.x (these are the customers’ virtual machines whihch needs to be accessible from the outside using RDP etc) So basically, what i was thinking to setup is that the customer virtual servers are added to the AD0X public, and all our internal servers are added to AD0X internal. However, the Web and the Api (and maybe others in the future) needs to have an open port 80 from the internet on a public ip, since the web contains our homepage etc, and the api should be 08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

28 of 68

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

accessible from the internet too. How would we set this up using TMG? Or should we do a di erent setup alltogether? Thank you. Peter Raihan says: August 27, 2010 at 9:05 AM In your scenario, few things going on. 1.TMG Con g 2. Publishing Web 3. RDP from extranet Step1: Create DMZ—Place all 10.0.1.x in Internal Network, Place all 4.4.4.x in the DMZ network as you want customer to access. This is for security reason. You dont want your customer to access your internal network. h p://microsoftguru.com.au/2010/06/17/howto-con gure-back-to-back- rewall-with-perimeter-dmz-topology-step-by-step-guide/ You may use 3-leg perimeter also. Step2: Publish internal web server, API using reverse proxy functionality of TMG (Extranet client access internal web) h p://microsoftguru.com.au/2010/08/08/how-to-con gurereverse-proxy-using-forefront-tmg-2010-step-by-step/ Step3: Create Terminal Services Gateway using Win2k8 TS (Extranet client will be able to do RDP to internal network). Allow RDP port in Router and TMG. .microsoft.com/…/WS08TSGatewayServerStep-By-StepSetupGuide_En.doc Peter says: August 27, 2010 at 3:35 PM Hi again, I’m a li le bit unclear about the third point: “(Extranet client will be able to do RDP to internal network).”. I dont want our customers to be able to access our internal network, only their vps, eg 4.4.4.5. I also want to be able to access my internal servers from the internet, how do i do this? using vpn of some sort? Peter says: August 27, 2010 at 4:12 PM Sorry i forgot to ask about this: Do we need the 2 internal AD servers and the 2 public AD servers? or can the perimeter network use the internal AD servers? If this is too much for the comment section, please leave me an email and we’ll talk $$$ for you to help us with the setup. Raihan says: August 31, 2010 at 8:53 AM Hi Peter, You dont need 2 AD server. If your internal DNS is ok for perimeter network. OK. if you dont want allow RDP then you can block it via TMG. type Public DNS or ISP DNS server IP in the external NIC of TMG server. You can email me on [email protected] for further help. Email me your visio diagram. Lets start from there. Let me know your location. I am on WST, Australia. regards, Raihan

08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

29 of 68

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

Abdellah says: September 29, 2010 at 10:14 AM Hi, I am trying to setup TMG with a single network adapter, I am having lots of problems, does anyone have a step by step installation for this type of con guration. Thanks in advance, Reply Raihan Al-Beruni says: September 29, 2010 at 7:52 PM Everything same as you see in the con g other then two. 1) you just have one nic. 2) Select TMG server on left hand pan>Right hand side task pan, click Launch Ge ting Started Wizard>Click Con gure Network Se ings>CLick Next>Select single network adapter> follow rest of the con g. By the way what problems you having? visit h p://microsoftguru.com.au for more TMG con g. Reply Abdellah says: October 1, 2010 at 5:18 AM Thanks Raihan, I will be installing the TMG in the DMZ with a single NIC, I do not have access to AD to authenticate the and no copy of AD is available in the DMZ. What would be the best options, we already have a CISCO VPN and access to OWA once authenticated, but s do not want to logon twice to access their e-mail. Thanks again for your help… Raihan Al-Beruni says: October 1, 2010 at 7:34 PM see the steps DNS con guration for DMZ network mentioned in my blog h p://microsoftguru.com.au/2010/09/01/con gure-3-leg-perimeter-dmz-using-forefronttmg-2010-step-by-step/ and DNS con g for perimeter is here h p://microsoftguru.com.au /2010/06/17/how-to-con gure-back-to-back- rewall-with-perimeter-dmz-topology-step-bystep-guide/ Use integrated authentication in TMG. your need not log on again. Hope that x this issue. amrai says: October 7, 2010 at 8:42 PM Hello Raihan, First of all, thank you very much for sharing your knowledge through your website. It helped a lot to install and con gure Frorefront TMG properly. It works nally even with the web site ltering. I installed Forefront on a testing environnement I chose the back Firewall option which suits our architecture. However, I would like to lter speci c URLs, but unless I’m mistaken with Forefront you only can set up a strategy within the framework of Forefront Microsoft startegy. Is there any chance to create our own startegy to lter some websites? Thank you in avance for your help. Amrai 08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

30 of 68

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

Reply Raihan Al-Beruni says: October 8, 2010 at 5:20 PM Right Click rewall policy>New>Access Rule> Actions:Deny From:Internal To:URL Categories & New Custom URL Set s:All s Apply Reply Imran Ahmed says: October 15, 2010 at 7:11 PM Good Post my friend, Appreciated Reply amrai says: October 18, 2010 at 10:57 PM Hello, Sorry to bother you Raihan. As I explained 2 weeks ago I installed Forefront TMG 2010 in a testing environment. I chose the the back rewall topology which requires 2 NICs. The installation worked perfectly thanks to your tutorial. However, I haveone question is there any means to change the back rewall topology into Single Network Adapter one? Or does it need the complete reinstallation of Forefront TMG to do that? Hope my question is clear enough. Regards, Thanks for your help again. Amrai Reply Con Stantine says: October 21, 2010 at 4:32 AM i just installed TMG in my Network, and i have one question about Inspection se ings. there is i think last option “Block archive les if unpacked content if larger than (MB).” lets say restriction is set to 40 mb. when the tries to copy 100 mb, tmg will throw a window that this cant copy this le because of restriction…. is it possible to edit this error message…? proxy error pages are editable. i found those html les and edited it… in this case if it is possible where to nd it? Reply Raihan Al-Beruni says: October 21, 2010 at 9:25 AM Right click on denial rules>property>Action>Advanced>Set custom redirected URL You will see example url h p://technet.microsoft.com/en-us/library/ee914626.aspx Reply Sami says: 08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

31 of 68

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

October 21, 2010 at 7:53 PM Please, I have install forefront TMG with the ip 10.61.1.76 using single NIC .i have about 20 branches that connect to the forefront TMG as a proxy server at the head o ce for internet access. Been working ne for some time now for all 20 branches. Suddenly some branch cannot get access to the internet with the forefront TMG set in the IE as proxy server. It is happening randomly. A branch that could not work at a certain time will work at other time. I captured the logging from one branch pc with the ip 10.61.7.17 Below is the log Denied Connection Log type: rewall Status: A non-SYN packet was dropped because it was sent bya source that does not have an established connection with the forefront TMG computer. Rule: none-see result code Source:internal(10.61.7.17:1481) Destination:local host (10.61.1.76:8080) Protocol:HTTP proxy Will be very happy if you can help me x this problem. Been working on to x it for three week with no results.PLEASE HELP.SOS Reply Raihan Al-Beruni says: October 22, 2010 at 8:29 AM There are always dropped packets constantly. It does not mean anything is wrong. The SYN error means exactly what it says. All connections begi with a SYN packet followed by an ACK packet being sent back the other way,…then the regular data portion of the session begins after that. The error is just saying something is trying to communicated with data (non-syn) packets without the connection rst being established. You have virus/spyware infected machines in those branches. Most of these types of infections cannot be totally removed with AV or Anti-spyware tools. They get embeded in the ’s pro le,…so rst do a cleanup with AV or ASpy tools,…then you have to backup the MyDocs, les on Desktop, Favorites, ect,…then delete the pro le,…create a clean one,…copy the saved les back into it. Repeat for every that has a pro le ont he machine. Clean install windows. Update service pack, run malware removal tools. add signature blocking rule and block con cker,blaster, worm, spyware etc.. Reply Sami says: October 22, 2010 at 4:31 PM ok,thank very much. i will do what you just told me and get back to you. Reply mani says: October 29, 2010 at 12:22 AM i want to install fr TMG in SBS 2008 64 bit OS. I have read a message from MS saying that FR TMG will not work on the domain controller server. Pl , i want to connect 15pcs with the server through TMG . reply me wheather i have to head and 08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

32 of 68

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

buy and install or not. thanks Mani.M online Computers AbuDhabi. Reply Raihan Al-Beruni says: October 29, 2010 at 8:54 AM TMG does not work on domain controller for sure. You can virtualize TMG if you dont want to buy server. For 15 PC TMG standard will do. TMG systems requirement h p://www.microsoft.com/forefront/threat-management-gateway /en/us/system-requirements.aspx TMG uned con g h p://technet.microsoft.com/en-us/library/ee796231.aspx Reply Muhammad Younas says: November 3, 2010 at 1:46 PM Salam Raihan, I have installed FF TMG. I have published a website but unable to access it or browse it. Please guide me in this regard. Thanks alot for your knowledge sharing. Regards, Muhammad Younas Reply Raihan Al-Beruni says: November 3, 2010 at 6:32 PM please explain more. What type of web sites? sharepoint, exchange or ordinary IIS. Did you add cname? external>internal or just for intranet. Reply Areeb says: November 24, 2010 at 12:01 PM Salaam Raihan, I have exported fully functional ISA SE 2006 to newly installed Forefront TMG EE on server 2008 (as per standard requirment of TMG), after importing the con guration, i am not not to access my OWA and Intranet Site. Reply Raihan Al-Beruni says: November 24, 2010 at 2:46 PM New TMG server got same fqdn and ip of ISA server or everything new. Did you imported certi cates from previous ISA server to New TMG. Check IP addresses of external nic of TMG server that con gured correctly. Check port forwarding for 443 to TMG server. Do you browse internet behind new TMG server. Get back to me when you nish checking all these.

08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

33 of 68

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

Reply Rizan Emilsyah says: November 29, 2010 at 9:43 AM Salam Raihan, We just want to upgrade ISA 2006 to TMG 2010 (not inplace). ISA server is single network. We want to upgrade with the same IP and the same NETBIOS. Could you tell us step by step how to upgrade? Reply Raihan Al-Beruni says: November 29, 2010 at 11:41 AM You will have a down time. Step1: Complete Backup ISA 2006 and Shutdown Step2: Build Win2k8 Server and domain using same name and IP Step3:Install TMG h p://microsoftguru.com.au/2010/03/08/forefront-tmg-2010-how-to-installand-con gure-forefront-tmg-2010-step-by-step/ Step4: Import Con guration h p://microsoftguru.com.au/2010/03/10/migrating-a-singleisa-server-to-forefront-tmg-2010-step-by-step/ Step5: Apply changes, reboot. All done. Reply Hussain says: November 30, 2010 at 12:27 AM Hello, How can I con gure ISP Split between two LAN and two ISP Connection? I want to con gure LAN-1 to go through ISP-1 and LAN-2 to go though ISP-2. Is it possible? Thanks, Reply Raihan Al-Beruni says: November 30, 2010 at 9:07 AM Here is solutions h p://technet.microsoft.com/en-us/library/dd440984.aspx Reply ramzy says: December 10, 2010 at 4:12 AM tnx u man.but i got error about servermanagercmd.exe which stop.how can i solve this problem? Reply Raihan Al-Beruni says: December 10, 2010 at 11:40 AM send the error code, event log Reply Victor says: December 17, 2010 at 4:14 PM Dear Raihan, 08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

34 of 68

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

You did a GREAT job here. Congratulations. Now and 3 days i’m experiencing a problem here. My Forefront server started blocking all incoming Replies to our messages. actually when we send a message and they reply on it. All the rest seems working ok. I haven’t made any changes on any se ing. Do you know why it started doing this? Thank you in advance Victor Reply Raihan Al-Beruni says: December 18, 2010 at 2:05 PM Hello Victor, As you said, you havent made any changes, still I would suggest check your rewall rules again whether anything added or not. Did you applied any patch on server or TMG. Install TMG SP1 and see how it goes. Do you see any event in event log? install service pack on server and tmg. let me know. Regards, Raihan Reply Tarek says: December 19, 2010 at 6:53 PM Dear Raihan, If you have a step -by -step load balancing guide It will be great and also what is the recommendation to do so, by single network adapter or tow network adapters, the best practice for that, Best regards, Tarek Reply Tarek says: December 19, 2010 at 6:55 PM Dear Raihan, If you have a step -by -step load balancing guide It will be great and also what is the recommendation to do so, by single network adapter or two network adapters, the best practice for that, Best regards, Tarek Reply Raihan Al-Beruni says: December 20, 2010 at 4:44 PM h p://microsoftguru.com.au/2010/06/10/install-and-con gure-forefront-tmg-2010-enterprisemanagement-server-ems-for-centralized-management-step-by-step/ h p://technet.microsoft.com/en-us/library/dd440984.aspx Single network adapter is not a good idea. If you tell me the purpose or design of network then I can advise more speci c to your your need. Reply 08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

35 of 68

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

Aaron says: December 20, 2010 at 7:29 PM Is it possible to have 1 upstream proxy with 2 sets of credentials and even tie in with Security Groups? ie. s have an ‘un ltered’ name and and Sta have ‘ ltered’ ? Cheers, Aaron Reply Raihan Al-Beruni says: December 21, 2010 at 1:36 PM Yes you can con gure that way. Reply Aaron says: December 21, 2010 at 1:52 PM I would appreciate some help with this please? Tarek says: December 21, 2010 at 1:12 PM Dear Raihan, Thank you for your reply, I need the TMG to publish only the OWA exchange, regards, Tarek Reply Raihan Al-Beruni says: December 21, 2010 at 1:32 PM To publish OWA you need to con gure either reverse proxy or DMZ. see more h p://microsoftguru.com.au/2010/05/28/exchange-2010-deployment-in-di erent- rewallscenario/ You can do it through single nic thats not enough secure. Con gure Edge or 3-leg perimeter using TMG h p://microsoftguru.com.au/2010/04/09/forefront-tmg-2010-publishing-exchange-server/ Reply Sameh says: December 29, 2010 at 6:51 PM Thank you for this excelent post! Reply Blogging year 2010—-what stats says | MicrosoftGURU says: January 3, 2011 at 11:57 AM [...] The most popular post that day was Forefront TMG 2010: How to install and con gure Forefront TMG 2010 —-Step by step. [...] Reply Ahmed Yousry says: January 9, 2011 at 7:51 AM really good 08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

36 of 68

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

Reply Nabil says: January 25, 2011 at 1:00 AM Salam dear, i have installed an infrastrcture with the new TMG 2010 . the existant infrastructure already had an ISA 2000 and a “network behind network” , the remote one is a remote o ce wish access the LAN trough and leased line directly connected to the LAN switch . here’s a simpli ed diagram : (Remote o ce : 110.100.100.x )—–leasedline———–|(LAN :100.100.100.X) | servers and, client have DefaultGateway 100.100.100.201 | (Internet) =============(TMG:100.100.100.201)=| the hole thing works great with isa 2000 client from 110.100.100.x was able to access servers directly. we changed the ISA 2000 with the new TMG et everything goes wrong . we are able to do a ping from 100.100.100.X to 110… but anaything else wont , and i see a lot of a non-sync packet dropped ….message in the realtime report . all the routing information are correct both in clients and TMG ,all networks are correctly de ned as pretected network with the good routing rule in the TMG console . i tried the one ” h p://blogs.technet.com/b/sbs/archive/2007/11/29/network-behinda-network.aspx” but it dose not solved the problem . i m looking for anything to do . any ideas are welcom . thanks in advance . Reply Raihan Al-Beruni says: January 26, 2011 at 2:02 PM I am ready to help but you need to help me explain your con g. If the diagram shows in the url is same in o ce. Then you should do things a bit di erently. What type of topology you are using in TMG? Eg, Edge, Back rewall, Single NIC etc. As you mentioned TMG as your default gateway. I reckon , you are using Edge Firewall. Step1: Create Site to Site VPN using your Router/Cisco 877/Modem between Site HQ & remote site Step2: Route IP 110.100.100.x to 100.100.100.x and vise-versa Step3: Place TMG behind the Router in Site HQ Step4: Con gure Edge Firewall in TMG & Add both IPs in the internet network of TMG Step5: Allow Policy for Routing, Ping, DNS, DH between both IP ranges in TMG Step5: Allow H p & H ps You are good to go. If you have two sites and TMG con gured single nIC as shown in your URL. This might not work properly. By default TMG block everything, you need to open ports one by one whatever your need is. Please let me how you going. 08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

37 of 68

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

Site to site VPN h p://microsoftguru.com.au/2010/08/24/how-to-con gure-site-to-site-vpnusing-forefront-tmg-2010/ Cisco 800 Series router con g h p://microsoftguru.com.au/2010/08/18/cisco-800-series-routercon guration-guide/ Forefront TMG Step by Step h p://microsoftguru.com.au/2010/03/08/forefront-tmg-2010how-to-install-and-con gure-forefront-tmg-2010-step-by-step/ Reply ron says: February 4, 2011 at 11:08 AM I’m having issues with my TMG 2010 install (std) 12202 The Forefront TMG denied the speci ed Uniform Resource Locator (URL). for direct internal IP also have another product that does a h ps check on a address that won’t connect to… say’s it can’t nd it. If i go directly thru my browser it works just ne… but not thru this app… worked nr prior to tmg. I’m beating my head on the ground… any help? Reply Raihan Al-Beruni says: February 4, 2011 at 11:44 AM Did you add connection veri er with AD DS? Di you publish that url in TMG you are trying to access? By default TMG block everything unless you de ne it. Reply Georgi says: February 21, 2011 at 12:32 AM Hi great article. It was my guide when I set up my TMG server. But I’m having troubles with it, can you give a li le help :). I’m trying to setup the following. The TMG server has 4 networks. It will be my only router in my infrastructure,so it should be able to route between networks. 1 – ISP (public IP) 2 – DMZ (192.168.101.91/24) 3 – Internal Clients(192.168.1.1/24) 4 – Internal Servers (192.168.7.101/24) During the initial con guration I had setup 3-leg topology and there I listed the rst 3 network adapters with the idea to add the fourth later. So I went to networks and added new Internal network Named Internal Server network and added IP range for my servers subnet. The problem is that in my routing table keeps “auto adding” persistent route for server network: 192.168.7.0 255.255.255.255 192.168.7.101. And this is cousing my server network to not be able to be routed via TMG. I looked everywhere even compare Client internal and server internal but I couldn’t nd any di erence but the route keeps adding itself.Tried to deleted it but without success. I couldn’t nd some dependency which couse it to “auto add” itself…

08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

38 of 68

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

Reply Raihan Al-Beruni says: February 22, 2011 at 8:51 AM Is it adding in TMG server or your separate server? TMG must not auto add persistant routing unless you speci ed separate routing rules in TMG. Please explaina bit Reply samy says: February 25, 2011 at 2:46 AM Hello Raihan, i have installed a new forefront tmg 2010,but i am not able to PING or do a remote desktop the server from my workstation.please help me to x this problem,thank you Reply Raihan Al-Beruni says: February 25, 2011 at 8:39 AM Check RDP services started and automatic Check Remote istration Allowed in Windows rewall Check RDP allowed in remote se ings Publish rules in TMG allowing rdp to the server from internal network Telnet Servername 3389 (check port is listening) Restart TMG server Let me know how it goes. Reply samy says: February 25, 2011 at 7:13 PM Thanks, its working now ,i had to create a rule (allow all outbound from :internal,localhost to: external,localhost) before it worked.The reason why i reinstalled my forefront tmg is not solved. i have 23 branches with di erent subnets, 10.61.2.0 10.61.3.0 10.61.4.0 .. 10.60.23.0 My forefront TMG is on 10.61.2.0 subnet and the defaults gateway is 10.61.2.251. so i have my routing in the forefront as Network Destination:10.61.0.0 Netmask:255.255.0.0 Gateway:10.61.2.251 metric:1 All the pc in the networks uses the forefront tmg as proxy. All the pc`s on the subnet 10.61.2.0 are able to access the internet at all times but although the other subnets too can get access to the internet but is not all the times.its and on.it will work for awhile and the next minute will go o . I have been having this problem of a while please help me .this is my 3 forefront tmg i have installed just to solve this problem .please 08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

39 of 68

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

i really need help nacho says: March 3, 2011 at 1:48 AM Hi, i have installed FTMG 2010 in single adapter mode.how can create access policy to allow internet access. thanx Reply Raihan Al-Beruni says: March 3, 2011 at 9:09 AM Right Click on Firewall Policy>New>Create New Policy Reply haseeb says: March 5, 2011 at 3:31 PM AOA Raihan Bhai how we activate Yahoo Webcam on TMG server.Please Tell me. Regards Raihan Al-Beruni says: March 6, 2011 at 3:52 PM Which port yahoo webcam run? Open that port and add a policy allowing yahoo webcam. what is Bhai? haseeb says: March 10, 2011 at 1:40 PM bhai mean brother.still i have no port add in tmg for web cam.please tell me which and how we add port in tmg serverplease tell me its procedure.yahoo webcam is not running at our end .its give network error message.plz help me Regards Raihan Al-Beruni says: March 11, 2011 at 1:40 PM Firewall Policy>Task pan>Tool Box>Protocols>-De ned Select -de ned>New>Protocol> This is how you add custom protocol. Once you policy allowing this protocol for internal client

nish adding custom protocol, create a

nacho says: March 3, 2011 at 2:29 PM thanks raihan, i have done that,but is it external that i am supposed to select as destination and what does external indicate? Reply samy says: March 3, 2011 at 4:21 PM Thanks, its working now ,i had to create a rule (allow all outbound from :internal,localhost to: 08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

40 of 68

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

external,localhost) before it worked.The reason why i reinstalled my forefront tmg is not solved. i have 23 branches with di erent subnets, 10.61.2.0 10.61.3.0 10.61.4.0 .. 10.60.23.0 My forefront TMG is on 10.61.2.0 subnet and the defaults gateway is 10.61.2.251. so i have my routing in the forefront as Network Destination:10.61.0.0 Netmask:255.255.0.0 Gateway:10.61.2.251 metric:1 All the pc in the networks uses the forefront tmg as proxy. All the pc`s on the subnet 10.61.2.0 are able to access the internet at all times but although the other subnets too can get access to the internet but is not all the times.its o and on.it will work for awhile and the next minute will go o . I have been having this problem of a while please help me .this is my 3 forefront tmg i have installed just to solve this problem .please i really need help Reply Vaibhava says: March 7, 2011 at 11:09 PM Hi i need ur help. i have con gure gmail on outlook but i am not able to use through tmg proxy server. Reply Raihan Al-Beruni says: March 9, 2011 at 10:27 AM How you know TMG is blocking outlook? Check live connections on TMG. Take a report and see. I reckon you miss-con gured outlook. ack909 says: March 11, 2011 at 2:32 PM Dear Raihan, I want to use two di erent internet connections together from di erent ISPs. ADSL and Satellite. ADSL used manual proxy and Satellite used no proxy. Can I do that in ISA 2006 or TMG 2010? How to con gure it. please help me. Thanks. Reply ack909 says: March 11, 2011 at 2:46 PM I am a newbie in networking. Can I use loadbalancing on the ISA 2006 with ADSL manual proxy and Satellite no proxy from di erent ISPs. 08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

41 of 68

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

please help me with step by step procedures. Thanks. Reply Raihan Al-Beruni says: March 12, 2011 at 1:11 PM Here is ISP redundancy con g h p://technet.microsoft.com/en-us/library/dd897038.aspx If you do load balancing than you need to use proxy. Reply David Nwokoro says: March 11, 2011 at 4:43 PM Hello, i have a heado ce with branches accross the country,from the heado ce,s can browse the internet through ftmg proxy,but my branches cannot browse the internet ,they go thru the tmg proxy too.prior to do this,they can.what am i not doing well or what has gone wrong??? Reply Raihan Al-Beruni says: March 12, 2011 at 1:15 PM You need to explain how HO & Branch is con gured using TMG. Is it site to site VPN con g? You must allow h p & h ps from all the branches to go to internal. all site ip must be added into HO TMG internal network. Reply David Nwokoro says: March 14, 2011 at 3:49 PM Thanks Raihan, How can i export rewall and web access policies from TMG,i encountered obstacle when browsing for the le path,it seems to be looking for a le.pls can u direct me how to Reply Bless says: March 15, 2011 at 9:04 PM Hi sir, I need a help from u… i have 2 domains in di erent vlan’s.. and the TMG 2010 is in workgroup. how can i control the s .. now everybody has access to internet. Same time i’m not able to or from the ftp sites. i did ftp allow and removed the check mark from read only.. but still i can’t.. pls help.. waiting to hear from u thanks Reply Raihan Al-Beruni says: March 16, 2011 at 9:08 PM Does TMG server part of domain? Do you have cross forest trust or just single forest con g? Make TMG server as domain member. Add connection veri er Add policy to allow or block internet. Reply Bless says:

08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

42 of 68

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

March 20, 2011 at 1:37 PM TMG is not on domain its in workgroup in separate vlan The two domains are single forest con g.. How to add this connection veri er? Palanikumar says: March 23, 2011 at 10:31 PM Hi, I am facing problem with gotomeeting client communication via TGM2010 noticed that its actaully dropping packet with the following error h p status

rewall. and Have

1790: the network logon failed. Reply Raihan Al-Beruni says: March 24, 2011 at 8:40 AM Please add connection veri er in TMG. Add Active Directory and DNS connection veri er. You have authentication problem. Reply Sameh says: April 14, 2011 at 11:44 AM Thank you but you did not say any thing about where dh shout sit? Reply Raihan Al-Beruni says: April 15, 2011 at 8:59 AM DH placed in your internal network other than any special requirement. Reply francisco says: April 15, 2011 at 5:55 AM Hi sr, May I have your help nding TMG 2010 reverse proxy information?… Thanks a lot. Reply Raihan Al-Beruni says: April 15, 2011 at 8:58 AM h p://microsoftguru.com.au/2010/08/08/how-to-con gure-reverse-proxy-using-forefronttmg-2010-step-by-step/ Reply Ahmed says: May 11, 2011 at 4:57 PM hello rehan I m going to deploy microsft exchange server2010, Fore front TMG in a new environment…can u help me in this ma er..furthermore there is another in which i will be needing ur help that is migrating from 2007 t0 2010… I read ur pro le and its quite amazing ..therefore awaiting ur positive response.. 08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

43 of 68

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

Reply Raihan Al-Beruni says: May 12, 2011 at 9:41 AM All Exchange related posts are here h p://microsoftguru.com.au/category/exchangeserver-2010/ TMG related posts h p://microsoftguru.com.au/category/forefront-tmg-2010/ Please visit those two category. scroll down and everything is there. Reply Ahmed says: May 12, 2011 at 12:29 PM i m regarding ur help seriously in migration from exchange 2007 to 2010….i m not con dent enough…kindly help me in this regard…further more if u kindly give me ur email address…or msn id so that i can chat with when doing the project hari says: May 25, 2011 at 5:36 PM hello sir, i deploy the forefront tmg 2010. ip have two nic. internet(wan) and lan. at lan nic ip 192.168.98.1/24and 99.1/24.i want to access any website from 192.168.98.50 without proxy.how to con gure witout proxy web access rule in forefront tmg2010. i am able to ping from 192.168.98.50 to isp gateway server but not access the internet. Reply Raihan Al-Beruni says: May 26, 2011 at 10:07 AM If you are behind proxy, without proxy you will not be able to use internet. This is the default nature of proxy. Reply Mustafa says: June 1, 2011 at 6:24 PM I have installed TMG 2010. Wpad entry is there in DNS and DH Server. i don’t add my client in Domain. whenever they go to browser they get name and screen and then browse internet. the problem is that the skype, yahoo messenger , gtalk & msn doesn’t work. please tell me how to do that or give me link that show each step how to do that. Reply Raihan Al-Beruni says: June 2, 2011 at 11:21 AM proper WPAD con g h p://microsoftguru.com.au/2010/10/16/how-to-con gure-forefronttmg-2010-as-wpad-server-auto-proxy-discoverystep-by-step/ if you de ne “All s or Authenticated s or s Group” can access internet in TMG than TMG will block rest of the connection. You have to add client in domain or con gure TMG as workgroup. h p://microsoftguru.com.au/2011/03/27/con gure-non-domain-forefronttmg-to-allow-tra c-from-domain--and-domain-clients/ opposite direction is true as well. Reply Mustafa says: June 2, 2011 at 4:17 PM Raihan, 08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

44 of 68

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

First of all thank you very much for your reply. i have 2 servers 1 AD,DNS,DH = 192.168.0.2 Domain (ntec.local) 2 TMG = 192.168.0.1 My DH Range 192.168.0.1 to 192.168.2.255 Subnet 255.255.252.0. I have followed your 2 web URL and con gure WPAD on DH and also con gure authenticate Server on TMG. Problem. 1. Wpad is working as i am ge ing name and screen on IE but not on Chrome, Mozila or Safari 2. when i put my name i.e NTEC\mac and it doesn’t authenticate and i am ge ing following message from TMG “407 Proxy Authentication Required. Forefront TMG requires authorization to ful ll the request. Access to the Web Proxy lter is denied. (12209 Please help me out as your help really ma ers to me. Thank you very very very Much. Mustafa says: June 3, 2011 at 7:48 AM Basically i want my my client to use internet without adding them in domain and with authentication sonu says: June 9, 2011 at 11:28 PM Dear Sir, i want to monitor that which is ing heavy le due to this my network slow. how can i do it in TMG server standard edition. all s in Active directory. your quick response would be highly appreciated. Thanks, Reply Raihan Al-Beruni says: June 11, 2011 at 2:15 PM Hello Sonu, Install TMG SP1 in your TMG server. Generate a custom report from TMG. You can setup limit. Right click on h p and h ps policy>Con gure HTTP>Setup payload. Thats all. Regards, Raihan Reply Ahmed says: June 11, 2011 at 9:37 PM Hello Raihan, 08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

45 of 68

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

How can i come to konw that who is sending request to the printer…i.e If A printer Is a ached on LAN then who is sending request to the printer.. Your quick response will be much appreciated Reply Ahmed says: June 11, 2011 at 9:38 PM That is How will I know that which Ip is sending request to printer….is this Possible.. Reply sebastian says: June 21, 2011 at 10:57 PM Dear Sir, When I am trying to take report form the TMG logs&reports option,it is not displaying any information. LAN 192.168.1.250 gateway:192.168.1.10(Domain controller) WAN 192.168.10.250 gateway 192.168.10.254(Router) Whether I have missed something in con guring the reports Regards Sebastian Reply Raihan Al-Beruni says: June 23, 2011 at 3:49 PM what sort of report you trying to obtain? Did you install TMG SP1 if not please install TMG SP1 Reply sujithktm says: June 22, 2011 at 1:47 PM Dear Sir, How to setup logs& Reports option in forefront. I have tried to con gure the same but coming only blank report Regards Sujith Reply Raihan Al-Beruni says: June 23, 2011 at 3:50 PM Please install TMG SP1 on your TMG server. If there is no logs to show than it will be blank. Reply yaw says: June 25, 2011 at 8:01 AM i have install TMG SP1.but i am not able to generate reports.i always get error 0xc0040432.please help me bro. Reply 08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

46 of 68

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

Raihan Al-Beruni says: June 26, 2011 at 1:50 PM what version of tmg you are using? what sort of report you need? Reply yaw says: June 27, 2011 at 4:33 PM Thank you very much for your response.i am using TMG 2010 version 7.0.8108.200 and the report i want is activity reports Terrence says: July 4, 2011 at 7:38 AM Good Day, I have a checkpoint rewall with an Exchange 2010 Edge server with Forefront for Exchange running on it. I only want to use TMG as a proxy server only not as a rewall is that possible? Regards, Reply Raihan Al-Beruni says: July 4, 2011 at 10:35 AM Hello Terrence, you can put CheckPoint on FrontEnd and TMG as Backend server. you can make a DMZ like that way. You can con gure TMG as proxy and reverse proxy for Exchange CAS. Short answer possible. Beauty of TMG is, TMG can be used a rewall, proxy, reverse proxy, proxy cache, content lter, URL lter, publishing websites, exchange, sharepoint so many so on. Its up to you how you want to utilize. Regards, Raihan Reply baibhava says: July 22, 2011 at 1:07 PM Hi Raihman , How r u?.. I am facing problem on my TMG server , i am not able to push patch through my patch manager on tmg srver ,same problem through antivirus server not able to push singnature on tmg server. in short my tmg server not updated patch & antivirus through my server. Sir can you help on this issue. Reply Raihan Al-Beruni says: July 24, 2011 at 3:19 PM Hello Baibhava, Please con gure a rewall policy to allow communication between antivirus server and TMG. How do you patching TMG server, you should use WSUS for patching TMG or use direct windows update to patch TMG. This should x the issue. 08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

47 of 68

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

Note that TMG block all communication by default. you need to open port one by one. Regards, Raihan Reply baibhava says: July 26, 2011 at 7:59 PM Hi Raiman, How r u? I con gured rewall rule but still facing same problem.Could u explain me how to create communication rule between antivirus server and TMG. For patching i am using CA ITCM and facing same problem . I already allow outbond port 42504 to 42511 for antivirus but still same issue. Sir pls can u help me on the same isssue. Thank Vaibhava Jesse says: July 23, 2011 at 8:55 PM Hello, I have installed and con gured TMG 2010 using a single network card setup. After following the steps above am still not able to access internet. What might be the problem? Have checked everything and seems correct. Reply Raihan Al-Beruni says: July 24, 2011 at 3:22 PM Step1: check whether IE con gured for proxy ? Step2: are you able to browse without TMG, this is con rm that the problem with somethingelse not TMG. Step3:con gure right port for browsing Step4:Create Web access policy for s who wants to browse through proxy. Reply VFRJAS says: July 29, 2011 at 8:51 PM Hi, You have crafted some very nice articles on TMG setup, but I’m struggling to determine the best setup for my network. Currently I have: Internet | Checkpoint – NAT | DMZ (two subnets designated as internal DMZ and external DMZ | Checkpoint | LAN I would like to utilise TMG for the following purposes: 08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

48 of 68

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

proxy for DMZ machines reverse proxy for some macines in DMZ and LAN with NIS future email hygeine future OWA What’s the best way to setup TMG, maybe Edge or Back-End? I’m thinking 2 NICs and Edge setup with external NIC on DMZ external subnet and Internal NIC on internal DMZ subnet? Then internal routes would all go through DMZ internal gateway? OR, is there a be er/easier way that I have overlooked? Regards, James. Reply VFRJAS says: July 29, 2011 at 8:52 PM Oh by the way LAN has lots of subnets in case that makes s di erence………. Reply Raihan Al-Beruni says: July 30, 2011 at 9:08 PM Why you making things very complicated? Keep it simple and sweet (KISS) so that policies do not over lap and topology does not contradict with each other. If I was in your situation, I would con gure back to back rewall for everything and get rid of check point. TMG is very powerful rewall, proxy, revervse proxy, content lter, publishing tools. TMG 2010 Enterprise provide NLB, ISP redundancy and central management features. However you design is ok. But at some point it will be a complete mess. So adopt KISS polocy. Reply Vfrjas says: July 30, 2011 at 9:59 PM Thanks Raihan Unfortunately although it would be simpler removing checkpoint is out of my hands. With that in mind and with my suggested design how would you setup the NICs? I think DMZ ext NIC would have public dns server and DMZ ext gateway address and DMZ int NIC would have no gateway and no DNS but routes for all LAN subnets? Regards and thanks James Bader Al Manai says: August 3, 2011 at 5:26 AM Mr. Raihan Al-Beruni please I study ur scenario too much time for Forefront Threat Management Gateway 2010 (TMG) we take this steps for this link h p://araihan.wordpress.com/2010/03/08/forefront-tmg-2010how-to-install-and-con gure-forefront-tmg-2010-step-by-step/ but I received this message • Error Code: 502 Proxy Error. Forefront TMG denied the speci ed Uniform Resource Locator (URL). (12202) • IP Address: 192.168.140.3 • Date: 8/2/2011 6:37:59 PM [GMT] • Server: SHRITTMG001.mjec.com • Source: proxy 08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

49 of 68

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

Look Mr. Raihan I will tell u about my scenario I have Server 2008 R2 with Internet modem D-Link I have 2 NIC in Server 2008 One (Internal) that what connected by Internet modem D-Link IP: 192.168.0.2 and Default Gateway 192.168.0.1 Second (External) that what connected by my local Domain IP: 192.168.140.3 and Default Gateway 192.168.140.1 When I take ur steps I fund error message 502 Proxy Error Can u tell me please How I can resolve this problem or maybe I must do more steps I have 100 need to use internet by proxy Please help me Reply Raihan Al-Beruni says: August 3, 2011 at 2:39 PM External NIC should connect to modem and internal NIC should connect to internal switch or local domain. You should con gure your TMG as Edge Topology. Please x it and let me know Reply Bader Al Manai says: August 7, 2011 at 2:37 AM Thank You too Much U understand my miss take by very fast time and because I read many con gure of many web sites Thank you Moe says: August 4, 2011 at 4:23 PM Hello, Thank you so much for the helpful article can you please help me out with some questions: i installed TMG on hyper-v virtual machine, i’m using windows 2008 r2 as an OS and i have one NIC that is connected to a router and the router to the modem i don’t have an installed DH here is where i nd problems when i try to add a private IP range when installing i can’t add the range i want, when i select the adapter i have installed it takes some default values and continue with the installation correctly. also when i con gure a rewall rule to lter and deny some URL’s are able to browse the restricted websites can you please tell me what i’m doing wrong as i’m using TMG for the rst time and i don’t have any experience in ISA. Reply Raihan Al-Beruni says: August 7, 2011 at 2:37 PM what sort of error you see when you try to add private ip range? Why you are using single nic? Reply Moe says: August 7, 2011 at 3:21 PM it’s not an error but when i add it i don’t nd it on the list, also i have one NIC on the physical machine that’s hosting the virtual i’m working on. 08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

50 of 68

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

Raihan Al-Beruni says: August 9, 2011 at 4:20 PM Click Networking>Right click on Internal network>property>add internal IP address. Moe says: August 11, 2011 at 3:45 PM thank you so much for the valuable advice i installed it and i con gured rewall policy rules and connected it to my AD and DC but now when i modify any client se ings and try to browse the internet using TMG i get the below error: Technical Information (for personnel) Error Code 10060: Connection timeout Background: The gateway could not receive a timely response from the website you are trying to access. This might indicate that the network is congested, or that the website is experiencing technical di culties. Date: 8/11/2011 7:35:07 AM [GMT] Server: ——————Source: Firewall thank you so much for helping me out Reply Raihan Al-Beruni says: August 12, 2011 at 1:40 PM Do you have upstream server? You DNS con g in TMG is wrong for sure h p://blogs.technet.com/b/isablog/archive/2009/08/27/side-e ects-of-incorrectdns-con guration-on-isa-server-10060-connection-timeout-scenario.aspx and h p://blogs.technet.com/b/isablog/archive/2008/11/24/error-10060-while-browsing-internetthrough-isa-server-2006.aspx h p://blogs.technet.com/b/isablog/archive/2008/07/10/isa-server-2006-sp1-problems-that-goesbeyond-the-test-bu on.aspx Correct your DNS con g for internal and external NIC Reply Strono says: August 11, 2011 at 5:22 PM Hi, How is having a hyper threading enabled gonna impact my TMG server? Thanks! Reply Raihan Al-Beruni says: August 12, 2011 at 1:34 PM TMG need a dual core U that is 1Ux2 core or 2U. Hyper threading may impact on underlying operating systems but not directly on TMG. Please explain your question li le bit more. Reply Strono says: August 15, 2011 at 2:09 PM I’m planning to setup my own TMG Server that has a dual-wan(internet) capability… As 08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

51 of 68

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

per my understanding not all processors have that hyper threading capability… What can happen if my processor doesn’t have one? How can it impact the performance of my TMG? Please enlighten me, thank you very much sir! Raihan Al-Beruni says: August 17, 2011 at 12:06 PM TMG Hardware requirement h p://technet.microsoft.com/en-us/library/ 382651.aspx If you follow these rules it will impact on performance otherwise it will impact on performance. Hannes Jansen says: August 12, 2011 at 1:38 AM Dear Mr. Raihan Al-Beruni. First of all, thank you for your Blog. As a newbie, I nd it quite helpful. Here is my question though. I have F TMG 2010 installed as an Edge Firewall, acting as Proxy Server which blocks the Internal Network’s HTTP and HTTPS except for a few chosen websites. Now I am unable to send or receive e-mail (provided by a 3rd party ISP with Outgoing Server: smtp.dsl.telkomsa.net) via this new Proxy. Please show me in the right direction. Thank you Reply Raihan Al-Beruni says: August 12, 2011 at 1:31 PM Hello Hannes, Where is your mail server? is it in cloud or internal network? Is it Exchange? How do you check email via outlook client or webmail. for webmail, if you allow h ps than it should work. for SMTP, you need to create policy for that. Please answer my questions I will be able to help you. Reply Hannes Jansen says: August 18, 2011 at 9:36 PM Thanks for your help Raihan, please excuse my late reply. Our e-mail is provided by an external company, with their own mail servers. We e-mail via pop3, and send via SMTP. Now, I tried creating a policy/rule: Allow POP3 & SMTP from Internal to External Network for All s. But still MS Outlook responds that it can’t nd the server (pop3.telkomsa.net). To be honest, I don’t have an idea about MS Exchange. Although I would like my server to all mail for all s, and then forward it to each ’s PC. I assume this is when Exchange comes in. But for now, if I can receive mail via my Proxy/MGT server, it’ll be Great! Thnx again for your help. Hannes SATHEESH KUMAR M says: August 27, 2011 at 4:55 PM Hi I have been testing TMG 2010 std Edn with two NIC’s(One for Internal and another for Internet access). I am having a problem with FTP access i.e from FTP client am able to /. But from windows FTP (ftp.exe) commandline am not able to les saying 08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

52 of 68

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

“ftp: bind :Can’t assign requested address” 230 166 logged in. ftp> cd ar 250 CWD command successful. ftp> mput test.txt mput test.txt? y > ftp: bind :Can’t assign requested address ftp> We are using VLAN’s. Internal P address is 192.168.10.43 255.255.255.224 no gateway. External IP 192.168.10.81 255.255.255.224 gateway 192.168.10.65. Can you pls hep me to con gure the same and make it work. Reply Raihan Al-Beruni says: August 29, 2011 at 1:39 PM Create a FTP rewall rule for clients Right click on that policy and click on property and uncheck readonly radio bu on>apply Reply SATHEESH KUMAR M says: August 29, 2011 at 2:30 PM It has been dnalready. Still it is not working… SATHEESH KUMAR M says: August 29, 2011 at 5:26 PM It has been done already. Still it is not working… Reply Dimon says: September 2, 2011 at 6:26 PM Hello! When a sends a request from IE to Internet, TMG opens only part of the site. TMG authorizes the as “DOMAIN \ name” and writes in the log “OK.” Another part of the site is blocked and TMG wrote in the log “Forefront TMG requires authorization to ful ll the request. Access to the Web Proxy lter is denied” and writes the name as Anonymous. When a sends a request immediately from Mozilla, the site opens normally. Why? Best regards, Dimon Reply Raihan Al-Beruni says: September 4, 2011 at 11:39 AM On the Monitoring>connectivity veri er>Add AD connection. Please con gure Proxy and port for IE through GPO. Did you con gure proxy in mozilla? TMG will block inappropraite websites and contect by default unless you create a policy for . Reply Dimon says: September 4, 2011 at 4:16 PM I created a rule that allows the to visit Web sites. TMG in the log says that it was 08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

53 of 68

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

applied this rule. I set both browsers to visit the site through a proxy server. Through the Mozilla site open completely, but the Internet Explorer site opens partially. The same site with the same computer with the same in the same time. esraa. alhayek says: September 7, 2011 at 2:44 PM Rihan …..how can i connect to you to help me in my network topology ???? what is your email or Facebook ?? Reply Raihan Al-Beruni says: September 8, 2011 at 4:42 PM I dont do facebook and twi er. Surprized!. Insecure platform. You can on h p://microsoftguru.com.au/forum Reply Tarim Wollendorf says: September 9, 2011 at 6:23 AM Hi Raihan, I use my FF as an edge rewall, Now I need to forward some ports from external to a server in the internal network. How can I accomplish this? For my Sharepoint and Exchange I used the web publishing and Exchange wizard. But I also need to forward ssh and VPN with EAP + certi cate authentication. Reply Raihan Al-Beruni says: September 9, 2011 at 4:30 PM From External to internal is called reverse proxy. You can publish any website or secure website using TMG. Just select source as external/internet and destination as the server you want to point. Similarly point SSH and VPN server. Import certi cate into TMG server. Reverse Proxy h p://microsoftguru.com.au/2010/08/08/how-to-con gure-reverse-proxy-usingforefront-tmg-2010-step-by-step/ h p://microsoftguru.com.au/2009/10/08/how-to-con gure-l2tp-ipsecL2TP IPSec VPN vpn-using-isa-server/ though this steps are based on ISA but TMG and ISA are pre y same. Let me know how you go. Reply Moataz says: September 10, 2011 at 10:14 PM Dear Raihan , i have a problem … i had a rule for every department to access a certain websites . one url set of this was for gmail and it was working ne , suddenly 2day its not working for this s and its only working for the s who has unlimited access . can you help me with this issue . Reply Raihan Al-Beruni says: September 11, 2011 at 11:46 AM Can you please monitor tra c for that using TMG and see what error you get and update me please. Did you change any rules that con ict with existing rules. Reply Renato says: 08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

54 of 68

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

September 12, 2011 at 4:05 PM Hello, I’m planning to migrate from ISA 2006 to TMG 2010. At now, I have a 3 leg con guration with Internal, External and a DMZ used for guests connecting at my o ce to the internet. I’d like to virtulize TMG but the server can host 2 Nics tops (it’s a blade server) so I was wondering if there’s a workaround to keep 3 subnets with 2 nics. The other way is to keep existing ISA 2006 and side it to TMG, could it work? Reply Raihan Al-Beruni says: September 21, 2011 at 4:17 PM If your blade server thats is ESX/Hyperv host connect direct to trunk port than you can con gure port groups for all three vlans/subnets and add three nics for TMG server. thats easy as this. for hyperv you can con gure vlan id for three subnets. Blade chassis directly connect to trunk port. you dont need to worry about that. Reply Tolik says: September 13, 2011 at 8:35 PM Hello Raihan, I have a li le question for you, its that the policies in TMG do not apply to secure NAT clients, I mean when I create new policy it applies to web proxy clients but not to secure NAT clients. I don’t want to change DH options (remove 003 router), is there anything that can be done in TMG server? Many thanks Reply Raihan Al-Beruni says: September 21, 2011 at 4:09 PM what type of topology you are using? I am not clear about your questions. Reply Tolik says: September 25, 2011 at 2:25 PM Thanks Raihan for your reply, the topology i am using is edge rewall. Concerning the DH options, client are ge ing Default Gateway along with the IP address, I dont want to remove it. Nihad says: September 22, 2011 at 1:34 PM Hello Raihan, i have a problem with yahoo mail i cant pdf a achment les, i use tmg in my network, and i think there something in tmg Prevents me to these les. Reply Raihan Al-Beruni says: September 23, 2011 at 12:58 PM What sort of policy you have con gured? Did you con gure pay load? you nd that in right click your rewall policy>con gure HTTP options Reply 08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

55 of 68

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

Irshad Ashra says: October 3, 2011 at 3:13 PM Raihan I am ge ing problem to access gmail and hotmail on forfront TMG server. I didn’t make any rule to stop any website i just made rule for access all sites. Please reply… Thanks Reply Raihan Al-Beruni says: October 3, 2011 at 3:52 PM TMG does not block yahoo and hotmail unless you publish a rewall policy to block gmail and hotmail. Can you please all the rewall and web access policy? Reply paulpeter5 says: October 7, 2011 at 2:51 AM Hai Brother… I have problem… I installed FF at Branch O ce with two NICs , one for LAN and the other for WAN. I am running 2 roles, DH and DNS in FF server. Oh almost forget.. The FF run on Windows 2008 SBS SP1. I connected FF to Central O ce through VPN site to site. And ed to domain at Central O ce. I have 6 client computers that using windows 7 pro 64 bit and ed all to domain. Everything running okay…. but suddenly all client computers could not be connected to domain controller. I saw to Network Sharing Center on Client Computer and FF server .. LAN unidenti ed and circle mark is still running. No IP address in All Client Computers. By the way I still remote FF from my Central O ce…. Reply Raihan Al-Beruni says: October 7, 2011 at 3:20 PM Can you please run tracert command to domain and check where is client blocking to? Is your client ge ting IPs from local DH? You con g seems weird to me. Why you con gured DNS and DH in TMG server? Reply paulpeter5 says: October 7, 2011 at 9:22 PM If you seems this is weird con guration..so do I. I am just continuing to maintain the work that have done by the man before me…. (I don’t know who did give him inspiration to make con guration like this) This the error message that I captured from DH role ” The DH service failed to see a directory server for authorization”. This the result of nslookup command : default server : unknow address : 10.10.66.1 for standard of comparison, I show you the result of nslookup command that i run in FF server (with the same con gution) from another branch o ce that connected to central o ce via VPN site to site : 08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

56 of 68

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

This the result of nslookup command in GW-PDG server default server : dc2.wk.local address : 10.10.1.13 (it have to be like this) All clients are ge ing IPs from local DH. Reply Alecia says: October 25, 2011 at 5:23 AM Hi We are currently running a server with ISA 2000…. I want to upgrage to TMG 2010. Do I have to start from scratch for all of the incoming/outgoing rules? Thanks Reply Raihan Al-Beruni says: October 27, 2011 at 4:06 PM update all SP. then try export and import con g. but i dont think this is going to work. you might need to redo the whole thing. h p://.microsoft.com/kb/982901 Reply Jatin Bawa says: November 2, 2011 at 6:51 PM HI Raihan, First of all, thank you very much for sharing your knowledge through your website. It helped a lot to install and con gure Frorefront TMG properly. actually I have installed successfully TMG 2010 in workgroup Environment, but i am facing the issue with domain environment its shwing the below mentione issue. can you please provide me the solution for this error? i will be very thankfull to you you can also mail me to [email protected] jatinB Reply Raihan Al-Beruni says: November 4, 2011 at 11:50 AM what sort of error you see? Can you please add Active Directory connections veri er in TMG Reply Luciano Vieira says: November 18, 2011 at 8:34 AM Hi Raihan, Would this scanerio work? Internet –> Cisco ASA / NAT services (NIC 192.168.0.1) –> TMG (external NIC 192.168.0.2) –> TMG (Internal NIC 192.168.10.1) –> Internatl web servers (192.168.10.X) 08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

57 of 68

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

Basically I would have all the external internet tra c coming to my Cisco ASA where I have some external valid IPs, the Cisco would translate/Nat to TMG external card that would then to the internal NIC / internal web servers. Thanks, Luciano Reply Raihan Al-Beruni says: November 18, 2011 at 1:28 PM con gure ASA as Front End Firewall and Con gure TMG 2010 as backend rewall and proxy. yes it will work. Reply Felipe says: November 23, 2011 at 10:08 AM Hi Raihan, Two internet links, two TMG Servers in the same AD Domain, how to create a load balance between the servers ? I can create a load balance if the servers works in a Workgroup mode, but i cant nd a solution to AD domain. I wouldn’t like to use a EEM server. Tks Felipe Reply Raihan Al-Beruni says: November 23, 2011 at 4:28 PM here is ISP redundancy h p://microsoftguru.com.au/2011/04/26/ -tmg-2010-con gureisp-redundancy-step-by-step/ Reply vandara says: November 29, 2011 at 8:43 PM Hello Mr Raihan Al-Beruni Pls detail me more about HTTPS inspection Reply efawr says: December 10, 2011 at 6:20 PM Hello, I just installed TMG 2010 and con gured it to allow web access. But when i installed TMG client on workstation, it is not able to connect TMG Server. Is there any speci c policy need to be created to allow access to TMG server. Note. – currently internet is accessible. Reply Raihan Al-Beruni says: 08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

58 of 68

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

December 16, 2011 at 1:18 PM you dont need to install TMG client. you can but you dont. con gure IE for proxy and browse internet thats all. Reply Ja er says: December 16, 2011 at 7:20 PM Hi Raihan, I have con gured TMG for test as Edge Firewall. I have two senarios. 1) I cannot add TMG into Local domain. 2) I have an internally hosted website which i want my CTO to access from outside. I have done port forwarding to local server TMG is stopping IIS access to the local server from outside. I tried VPN But not able to do. Could you plz Guide Me? It will be a great help Reply help says: December 29, 2011 at 4:05 PM Raihan Al-Beruni hi i have problem, i have tmg service pack 1 when i remove from the rule it did not remove after Synchronization it come back .. i must do it 3 or 4 time to remove from the rule… when i look at troubelshuting its says that is has been removed can you halp me ? Reply Raihan Al-Beruni says: December 29, 2011 at 4:51 PM Add AD connectivity veri er in TMG>Monitoring Create AD Group. Add that AD Group into TMG Add that group into rewall rules If you want to add or remove from any groups do it though AD not via TMG. that should work. Reply Shanawaz Maktum says: January 11, 2012 at 4:30 PM Hi Raihan I have a few queries 1> do you need to Install EMS incase you want to have 2 array servers or can it work without EMS 2> steps to con gure rst array to second server for the rst time and how will it work Regards Shanawaz Maktum Reply ahmed says: February 13, 2012 at 1:11 PM hello, I have a problem that when i connect through team viewer it shows black screen..i have also 08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

59 of 68

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

ISA installed can you tell me how it can be resolved Reply Shanawaz Maktum says: January 11, 2012 at 4:48 PM Hi Raihan Is it possible migrate from ISA 2006 to TMG a single rule to test if it working. Regards Shanawaz Maktum Reply arunn says: January 18, 2012 at 11:26 AM Hello, i have TMG 2010, its working ne as web proxy and web ltering but i am facing one issue for outlook.but mail is not ing in outlook please suggest me what step i can do for outlook. Reply Humair Khan says: January 24, 2012 at 6:44 PM Hi Raihan Al-Beruni, Thanks for posting this helpfully steps of TMG… i would like to use this step than i will tell u how i get improve my TMG from this Guide… Thanx Reply Shanawaz Maktum says: January 25, 2012 at 1:08 PM Hi Raihan Need a small help, I need so test cases to test my TMG Array and other things are working ne or not, can up provide me some test cases for the same. Reply Jasser says: January 30, 2012 at 1:16 AM Hi Raihan Really i need help me i have TMG Server with 1 internal lan (192.168.1.0)and external lan (x.x.x.x) and have vpn connection between branch the branch ip (192.168.3.0) i add the branch ring ip in internal network in TMG and i have connection to internet from branch but i can’t remote or access anyserves from internal servers(192.168.1.x) because the packet dropped because forefront tmg don’t have established connection if stopped service rewall every thing working but when started every thing stop unless internet browsing i have static route betwwen 192.168.1.0 and 192.168.3.0

08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

60 of 68

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

can you help me plzzZz? Reply Raj says: February 4, 2012 at 4:27 PM Hi I am trying to patch mt tmg 2010 servers using SCCM 2007 but is is failing. Do you know what ports I need to open to allow this ? Reply Raihan Al-Beruni says: March 15, 2012 at 1:21 PM h p://technet.microsoft.com/en-us/library/bb632618.aspx Reply shakeel says: February 22, 2012 at 2:00 PM what is the perfect live monitoring and reporting tool for tmg Reply Raihan Al-Beruni says: March 15, 2012 at 1:23 PM TMG MMC>Monitoring Reply odel says: February 29, 2012 at 6:42 PM Hi Raihan je search un package FR ???? Reply Raihan Al-Beruni says: March 15, 2012 at 1:25 PM What you saying man? I speak only English! Reply Ben Reeve says: February 29, 2012 at 10:25 PM Hi, Great guide, some really useful info in there. I’m currently in the process of se ing up a new TMG server on our network and I have a question that I can’t seem to see the answer to. At the moment our LAN connects directly to a hardware rewall which in turn connects to a router for our ADSL connection. The TMG will sit between the rewall and the LAN so it will use two NICs, one internal and one external. The only thing I can’t see is how TMG knows that the external NIC is the one used to send tra c to that’s not local. I hope that makes sense and any clari cation would be great. Many thanks, Ben.

08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

61 of 68

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

Reply Raihan Al-Beruni says: March 15, 2012 at 1:32 PM con gure Back rewall in TMG. h p://microsoftguru.com.au/2010/06/17/how-to-con gureback-to-back- rewall-with-perimeter-dmz-topology-step-by-step-guide/ Reply SK Shrivastava says: March 9, 2012 at 9:04 PM Hello Sir, I have TMG server and i dont have exchange server but i want to open h ps://web.yyyy.com/owa (Test Only) how to allow this test owa site on my tmg server .Through internet it’s working ne but if i am using through proxy it’s not opening on client side. i dont have any exchange server it’s another comany owa which opening on internet ne but not open through proxy server on my client side pc . Pls do the needfull Thanks Reply Raihan Al-Beruni says: March 15, 2012 at 1:41 PM create a rewall policy or web access policy to allow internal client access the site. Reply Kashif says: March 16, 2012 at 6:52 PM Hi there, I deployed TMG 2010 in my network. Problem which i am facing is the computers that connect via TMG 2010 are unable to access our VPN clients. It give error 619 during ing name and . The same VPN connection works ne if I by TMG 2010 from the same computers. I have created a rule to allow PPTP from internal to external network but of no use Can anyone please help me on this…. Reply Raihan Al-Beruni says: April 5, 2012 at 2:44 PM please add AD cennectivity veri er into TMG>Monitoring>connectivity veri er. that will allow AD talk to TMG. please check again Reply faisal ali says: March 31, 2012 at 12:42 AM Thanks a lot this artical is help me very deply con gurations thanx once again my next question is this how i blocked these social and non social sites just like 08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

62 of 68

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

facebook youtube twiter porn sites etc..? kindly help me out because i implement these role our organization Reply Raj says: April 11, 2012 at 10:18 PM Hi I am ge ing intermi ent 502 Bad Gateway errors from one particular server accessing two urls via a TMG Server. In the TMG logs I am seeing 64 The speci ed network name is no longer available. What is the best way to troubeshoot and x this ? Reply Raihan Al-Beruni says: April 13, 2012 at 2:36 PM here is an explantion h p://www.checkupdown.com/status/E502.html Con gure TMG with correct protocol/port that your server is con gured Reply Raj says: April 16, 2012 at 10:13 PM Hi Thanks for the previous reply. Can you tell me how to override ‘Status 64 The speci ed network name is no longer available’ problem. It is only coming from one IP address and is very intermi ent. Your help will be very much appreciated. Reply faisal ali says: April 17, 2012 at 7:35 PM hi Raihan i hope u ne i want to need you kindly provide me a step by step con guration with TMG 2010 web ltering and block web sites HTTP/HTTPS i found the role of block web sites but they can’t work properly because are go the block sites on HTTPS so kindly provide me a technical help regards Faisal Ali Reply michael says: April 17, 2012 at 4:42 PM Hi I hope I’m not bothering you 08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

63 of 68

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

I try to the TMG to the domain but can not I looked at Event Viewer and there I see failed with ID 4625 I have not found a solution to that could you help me please Thank you Michael Reply Akshay Srivastava says: April 20, 2012 at 3:18 AM From where can I the e-book on Forefront TMG ? Reply Mohammad says: May 6, 2012 at 12:16 PM Hello Sir, I want to setup TMG 2010 standard edition, i have a network of 30 computers, used LAN IP range is 192.168.1.100 to 192.168.1.150, we dont have exchange server but wants to allow only to access outlook mail.. we have some branch s and wants to give VPN access ..which method is suitable for this.. i mean Edge rewall, 3 leg perimeter or back rewall??? please help me… Reply Ali Mukhtar says: May 21, 2012 at 11:11 PM Hello Raihan, I want to test it(TMG) and unfortunatly we have very low budget. thats why I am testing it on windows 2008 r2 64bit on intel core2duo mechine. I ed TMS trail version. when I am clicking on “Run preparation tool” its giving me message “This tool does not this processor plateform. for details about operating system requirments. see the Installation Guid on the MS TMG CD” why this happening? I tried a lot but fails. please help me. thanks & regards Ali Reply Sri says: May 24, 2012 at 9:15 PM Hi Raihan, Need your advise on solutioning a TMG requirement. We have a old ISA 2000 server which connects to both Internal o ces as well as other client ces.For these client o ces, this ISA server acts as a rewall to access resources with in the internal network. Now we are planning to deploy TMG enterprise server on virtual environment and now we have no idea how was the existing ISA 2000 con gured. Could you please advise me which possible way we need to con gure to the requirement. The Virtual server has 2 Vnic’s and we are not sure in which network topology mode we need to install. I am also from Australia. If you can provide your number, I can explain more on detail 08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

64 of 68

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

about the requiremnet and the environment. Sri. Reply Masterman_777 says: May 26, 2012 at 4:24 AM Dear Raihan, This is from the bo om of my heart that you are doing a G8 Job my Friend…. I liked a lot…. Keep it UP…….. Reply Masterman_777 says: May 27, 2012 at 3:33 AM Hello Raihan, I need 2 Help from you the rst one is that I want to block Team viewer through ISA 2006 SP1 and Second is we have installed ISA 2006 with Edge Firewall Network Topology and we are using a Single NIC for this, kindly let me know is this the proper con guration. I have gone through your article and found that there is one more Network Topology which suits my environment is Single Network Adapter Topology, as we have assigned only one NIC to our ISA Server we can go ahead and use this Topology. We are running this server on Hyper-V and now we are planning to upgrade our ISA Server to TMG, so we can go ahead and con gure Single Network Adapter Topology. Well few more things we have 4 NIC on the Physical server and we have done Teaming 2*2 and assigned one NIC to the Virtual one. Reply Anu Khatri says: May 27, 2012 at 1:44 PM Hi Raihan, Please help me also, as i have TMG 2010 installed & need to con gure one rule in which i want to give access to only selected websites rest all internet will be blocked. Please suggest how i can do it. Thanks, Anu Reply WWahrman says: June 8, 2012 at 4:33 AM muy buen aporte! muy certero, pero tengo un par de preguntas, esto sustituye al isa server logicamente, pero en mi caso tengo checkpoint rewall-1 tamien, tambien sustituiria a este?, cuales son las desventajas de forefront TMG? lei que microsoft dejaria de sacar actualizaciones ya quiere irse deshaciendo de el poco a poco, es esto cierto? Reply WWahrman says: June 8, 2012 at 4:52 AM Forgive the previous comment, very good contribution! Very certain, but I have a couple of questions, Forefront substitutes the IsaServer logically, but in my case I have checkpoint 08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

65 of 68

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

rewall-1. Does ForeFront do Checkpoint’s work also?, which are the disadvantages of forefront TMG? i read that Microsoft stoped of extracting updates already wants to be falling apart of li le by li le, is it certain this? Reply Jose says: June 29, 2012 at 10:57 AM Hello Raihan, Congrats. You have an excelent Blog and I surprised with your high experience with this solution. I would like to know what is your recommendation about my case. I have a cisco rewall to protect my network and OpenDNS to web ltering and malware protection but this service will not free anymore this year. For that reason. I am looking for a cheap and good solution as TMG but I don’t have clear what is the best t network topology scenario. My network is 90% Microsoft and I have availability a physical server with minimum requirements and 1 license promo TMG standard. What do you think about this?. Thanks and Regards, Reply Jose says: June 30, 2012 at 2:37 AM Hi Raihan, It´s great blog. Congrats. I would like to know if you can help to me. Currenctly. We have OpenDNS for web ltering and I think that ISA Server or TMG could be a be er solution for many reasons but I have a li le confuse what is the best t network model that we should be to implement. I have a Cisco Firewall to block and I think that one server with TMG for web ltering for internal s. What is your best recommendation?. Thanks and Regards, Reply Tariq Masood Khan says: October 17, 2012 at 6:56 PM Hi, Can anyone tell me how to allow Skype in TMG 2010 with HTTPS inspection enabled. When HTTPS inspection is disabled it works. I need skype working with HTTPS inspection enabled. Reply gerald says: December 28, 2012 at 9:49 PM after installing the TMG is it must I manually put proxy on I.E even after con guration Reply Murthy says: April 4, 2013 at 8:55 PM Hi Raihan, I need to con gure TMG servers in load balancing mode.(i.e, If TMG1 server fails it must work with TMG2 server.) For these i have installed AD (win 2008) , TMG1(win 2008) & TMG2 (Win 2008) in VM and added to TMG to domain. And now in TMG1 & TMG2 in which mode i need to install and how to con gure load balancing mode for my TMG server.

08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

66 of 68

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

Pls Suggest. Regards Murthy Reply Raihan Al-Beruni says: April 5, 2013 at 10:08 AM here are guides h p://microsoftguru.com.au/2011/04/30/ -tmg-2010-con gure-networkload-balancing-among-enterprise-array-/ h p://microsoftguru.com.au/2010/06/11/install-and-con gure-forefront-tmg-2010-enterprisemanagement-server-ems-for-centralized-management-part-ii-step-by-step/ h p://microsoftguru.com.au/2011/04/26/ -tmg-2010-con gure-isp-redundancy-step-by-step/ hope this help. Reply Alex. says: April 16, 2013 at 5:29 PM Hullo , my question is: currently i have a network where the setup is ISP connected to the modem from the modem to the router and from the router to my server and LAN, now this is the question, i would like to add TMG rewall on the network. what set up is the best to use? and could still the con g. be the same as this in the post de nately changing the IPs? thanks. Reply Raihan Al-Beruni says: April 17, 2013 at 10:53 AM I am not clear about your questions. You should use edge topology as per your description. ISP…>Router…>TMG Edge Con g…..>LAN Reply keegan says: April 24, 2013 at 11:56 PM Can it be installed on a Domain controller? Reply Raihan Al-Beruni says: April 25, 2013 at 10:18 AM No. Never. Reply keegan says: April 25, 2013 at 1:39 PM Hi, so..What is the way around it? Because I need both the DC and TMG for management….Does it mean I will have to install on 2 di erent machines? …or can I create a VM on the DC and install TMG ..help!! M Danish Haroon says: May 1, 2013 at 7:44 PM Great Work Thanks For Posting Reply nwaleed says: 08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

67 of 68

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

June 9, 2013 at 7:37 PM Many thanks It’s really great work. Please how can I con gure secure NAT clients on TMG 2010 ?TMG rules works ne when i de ned TMG address as a proxy server in Internet explorer LAN se ings and port 8080 as well.but i prefer to use secure NAT clients instead of web proxy clients . Our network is complex network with routers bridging subnets between the client and Forefront TMG. Thanks in advance Reply Raihan Al-Beruni says: June 11, 2013 at 2:19 PM to con gure NAT between internal and external or vise-versa, just create network rule in Networking>Internal Network or external network>Create new rule. create your desired rule. Reply Mark says: July 24, 2013 at 9:04 AM Odd question, probably: 1) have a two-stage H/A rewall composed of a pair of Juniper SRX and a pair of TMG2010 servers. The SRX are on the Internet side, the TMGs internal from them. 2) I need to route an internal server through the TMG array and have the internal ip address presented to the Junipers so that it can be used as input for a VPN rule. (Partner is requiring a Public address within the tunnel, not just on the outside, so I have to do the NAT at the Juniper side) 3) Distant end of the VPN is a Cisco ASA. 4) Created the tunnel and set up rules to nat tra c, but I ran into an issue when trying to route via the TMG array — the array insists on NAT’ing to its ‘external’ VIP vice ing the address on to the Juniper. 5) A empted to get around this by sending to one member of the array and not the internal VIP, but I think this might be causing issues for the return tra c, which is sometimes being closed for non-receipt of a SYN/ACK (subsequent non-SYS packets from the client are then dropped for no existing connection) Any ideas? Reply Raihan Al-Beruni says: July 29, 2013 at 12:43 PM First you have to create back to back rewall between Juniper and TMG. Add internal IP address range into juniper internal IP address range. this ip range must be added into the rules of juniper. Then same internal IP address range must be added into internal network of TMG. then publish the VPN connection within TMG and Juniper to Cisco ASA. then publish rule allowing ip range in ASA and Juniper. this is called two tier rewall. Its a great rewall from security point of view but sometimes di cult to maintain. Reply muhammad umer says: October 2, 2013 at 6:41 PM hi it umer here i have a one problem in my FTMG 2010 that i have installed FTMG in server 2008 R2 08/12/2013 11:22

Forefront TMG 2010: How to install and configure Forefront TMG 20...

http://araihan.wordpress.com/2010/03/08/forefront-tmg-2010-how-to-i...

and i have make allow rule in tmg and my server internal ip address is 10.0.0.1 when i go to client pc the internt is not working when i am puting the of server internal in client brower proxy so then it access the internet but i want that client do want to put proxy he or she can access internt directly can any one help Reply Raihan Al-Beruni says: October 7, 2013 at 2:26 PM you need to con gure proxy correctly. Click networking>Internal>property>Web Proxy> see the correct port and proxy con g. Also allow HTTP/HTTPS access from internal network to external. Con gure IE with correct proxy se ings i.e. ip address of inernal nic of TMG server and port. Reply

The Contempt Theme. Blog at WordPress.com. Follow

Follow “Information Technology Blog”

68 of 68

Powered by WordPress.com

08/12/2013 11:22