Edoc.site_solution-manual-for-supply-chain-management-4-e-su.pdf 3v3k4d
This document was ed by and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this report form. Report l4457
Overview 6h3y3j
& View Edoc.site_solution-manual-for-supply-chain-management-4-e-su.pdf as PDF for free.
More details h6z72
- Words: 3,281
- Pages: 16
Full file at http://testbanksolutions.org/Solution-Manual-for-Supply-Chain-Management,-4-E-Sunil-Chopra,-PeterMeindl
Chapter 11: Managing Economies of ScaleUncertainty in athe Supply Chain: Safety Inventory Exercise Solutions 1. DL = LD = (2)(300) = 600
L = L D =
2 ( 200) = 283
ss = FS-1 (CSL) L = FS-1 (0.95) 283 = 465 (where, FS-1 (0.95) = NORMSINV (0.95)) ROP = DL + ss = 600 + 465 = 1065 Excel Worksheet 11-1 illustrates these computations 2. DL = (T+L) D = (2+3)(300) = 1500
L =
T L D
2 3 ( 200) = 447
=
ss = FS-1 (CSL) L = FS-1 (0.95) 447 = 736 (where, FS-1 (0.95) = NORMSINV (0.95)) OUL = D(T+L) + ss = 1500 + 736 = 2236 Excel Worksheet 11-2 illustrates these computations 3. DL = LD = (2)(300) = 600
L = L D =
2 ( 200) = 283
ESC = (1 – fr)Q = (1 – 0.99)500 = 5 We use the following expression to determine the safety stock (ss):
ESC ss[1 F S (
ss
L
)] L f S (
ss
L
)
1
Full file at http://testbanksolutions.org/Solution-Manual-for-Supply-Chain-Management,-4-E-Sunil-Chopra,-PeterMeindl
ESC = –ss[1 – NORMDIST(ss/L, 0, 1, 1)] + L NORMDIST(ss/L, 0, 1, 0). We utilize the GOALSEEK function in EXCEL in determining safety stock (ss) by using ss as the changing value that results in an ESC value of 5. Excel Worksheet 11-3 illustrates these computations. Goal Seek set-up: SET CELL: C29 TO VALUE: 5 BY CHANGING CELL: C27 This results in an ss value of 477 and the reorder point of: ROP = DL + ss = 600 + 477 = 1,077 4. DL = LD = (2)(250) = 500
L = L D =
2 (150) = 212
ss = ROP – ss = 600 – 500 = 100 CSL = F(DL + ss, DL, L) = F(600, 500, 212) = NORMDIST (600, 500, 212, 1) = 0.68
ESC ss[1 F S (
ss
L
)] L f S (
ss
L
)
ESC = –ss[1 – NORMDIST(ss/L, 0, 1, 1)] + L NORMDIST(ss/L, 0, 1, 0) = 43.86 Fill rate (fr) = 1- (ESC/Q) = 1- (43.86/1000) = 0.96 Excel Worksheet 11-4 illustrates these computations 5. DL = LD = (2)(250) = 500 L =
L 2D D 2 s 2L
=
2
2
2
2 150 250 1.5
= 431
ss = FS-1 (CSL) L = FS-1 (0.95) 431 = 709 (where, FS-1 (0.95) = NORMSINV (0.95))
2
Full file at http://testbanksolutions.org/Solution-Manual-for-Supply-Chain-Management,-4-E-Sunil-Chopra,-PeterMeindl
ESC ss[1 F S (
ss
L
)] L f S (
ss
L
)
ESC = –ss[1 – NORMDIST(ss/L, 0, 1, 1)] + L NORMDIST(ss/L, 0, 1, 0) = 9 Fill rate (fr) = 1- (ESC/Q) = 1- (9/1000) = 0.991 Standard deviation of lead time
Required safety inventory
1.50 1.00 0.50 0.00
709 539 405 349
Excel Worksheet 11-5 illustrates these computations 6. Following are the evaluations for the Khaki pants: Disaggregated Option: DL = LD = (4)(800) = 3200
L = L D =
4 (100) = 200
Coefficient of variation = / = 100/800 = 0.13 ss per store = FS-1 (CSL) L = FS-1 (0.95) 200 = 329 (where, FS-1 (0.95) = NORMSINV (0.95)) Total safety inventory = (329)(900) = 296,074 Total value of safety inventory = (296,074)(30) = $8,882,210 Total annual safety inventory holding cost = (8,882,210)(0.25) = $2,220,552 Holding cost per unit sold = 2220552/(800)(900) = $3.08 Aggregated Option:
DC kD
= (900)(800) = 720000
3
Full file at http://testbanksolutions.org/Solution-Manual-for-Supply-Chain-Management,-4-E-Sunil-Chopra,-PeterMeindl
C D
k =
900 (100) = 3000
DL = LDC = (4)(800)(900) = 2,880,000
L =
L DC =
4 (3000) = 6000
ss = FS-1 (CSL) L = FS-1 (0.95) 6000 = 9869 (where, FS-1 (0.95) = NORMSINV (0.95)) Total safety inventory = 9869 Total value of safety inventory = (9869)(30) = $296,070 Total annual safety inventory holding cost = (296070 )(0.25) = $74,018 Holding cost per unit sold = 74018/(800)(900) = $0.1 Savings in the holding cost per unit sold from aggregation = $3.08 - $0.1 = $2.98
Following are the evaluations for the Cashmere Sweaters: Disaggregated Option: DL = LD = (4)(50) = 200
L = L D =
4 (50) = 100
Coefficient of variation = / = 50/50 = 1 ss per store = FS-1 (CSL) L = FS-1 (0.95) 100 = 164 (where, FS-1 (0.95) = NORMSINV (0.95)) Total safety inventory = (164)(900) = 147,600 Total value of safety inventory = (147,600 )(100) = $14,760,000 Total annual safety inventory holding cost = $14,760,000 )(0.25) = $3,690,000 Holding cost per unit sold = $3,690,000 1/(50)(900) = $82 Note: the above are also incorrect on the worksheet. Aggregated Option:
DC kD
= (900)(50) = 45000
4
Full file at http://testbanksolutions.org/Solution-Manual-for-Supply-Chain-Management,-4-E-Sunil-Chopra,-PeterMeindl
C D
k =
900 (50) = 1500
DL = LDC = (4)(50)(900) = 180000
L =
L DC =
4 (1500) = 3000
ss = FS-1 (CSL) L = FS-1 (0.95) 3000 = 4935 (where, FS-1 (0.95) = NORMSINV (0.95)) Total safety inventory = 4935 Total value of safety inventory = (4935)(100) = $493,456 Total annual safety inventory holding cost = (493456)(0.25) = $123,364 Holding cost per unit sold = 123364/(50)(900) = $2.74 Savings in the holding cost per unit sold from aggregation = $82.84 - $2.74 = $79.50 Centralization results in savings for both products, but it is evident that savings in holding cost per unit sold from aggregating Cashmere Sweaters is higher than Khaki pants. So, Cashmere Sweaters are better for centralization. Excel Worksheet 11-6 illustrates these computations. 7. Disaggregated Option: : DL = LD = (8)(3000) = 24000
L = L D =
8 2000 = 5657
ss at = FS-1 (CSL) L = FS-1 (0.95) 5657 = 9305 (where, FS-1 (0.95) = NORMSINV (0.95)) The ss at the other five countries is evaluated in a similar manner, which results in a total ss for Europe of 48,384 Aggregated Option:
5
Full file at http://testbanksolutions.org/Solution-Manual-for-Supply-Chain-Management,-4-E-Sunil-Chopra,-PeterMeindl
D
C
6
Di = 3000 + 4000 + 2000 + 2500+ 1000 + 4000 = 16500
D C
i 1
6
i 1
2 i
=
2000 2 2200 2 1400 2 1600 2 800 2 2400 2 = 4445.22
DL = LDC = (8)(16500) = 132,000
L =
L DC =
8 ( 4445.22) = 12573
ss = FS-1 (CSL) L = FS-1 (0.95) 12573 = 20,681 (where, FS-1 (0.95) = NORMSINV (0.95)) Inventory savings from aggregation = 48,384 – 20,681= 27,704 Excel Worksheet 11-7 illustrates these computations. 8. (a) Disaggregated Option: From the previous problem, we know that the total ss for Europe is 48,384 Holding cost = (200)(0.25)(48384) = $2,419,200 Aggregated Option: ss = 20,681 Holding cost = (200)(0.25)(20681) = $1,034,036 Savings from aggregation = $2,419,200 -$1,034,036 = $1,385,164 (b) If the $5/unit additional cost of assembly from centralization then the total additional costs = (132000)(52)(5) = Savings = $1,385,164 - So, it is not economical to aggregate (c) If the lead time changes to 4 weeks, we evaluate the safety stocks and associated costs in a similar manner. The holding cost from the disaggregated option = (200)(0.25)(34213) = $1,710,650 The holding cost from the aggregated option = (200)(0.25)(14623) = $731,150 Savings from aggregation = $1,710,650 - $731,150 = $979,500 Excel Worksheet 11-8 illustrates these computations.
6
Full file at http://testbanksolutions.org/Solution-Manual-for-Supply-Chain-Management,-4-E-Sunil-Chopra,-PeterMeindl
9. Since the demand at various locations is not independent, we utilize the following expressions for the aggregated option: DC =
ik1 Di k
var(D C ) σi2 2 ij i j i 1
i j
CD var(DC ) For = 0.2
CD var(DC ) =
L =
L DC =
2000 . 2400 2(0.2){(2000)(2200) . (800)(2400) 2
2
20002 . . 24002 2(0.2){(2000)(2200) . . (800)(2400)}
8
= 17307 ss = FS-1 (CSL) L = FS-1 (0.95) 17307 = 28467 (where, FS-1 (0.95) = NORMSINV (0.95)) Inventory savings from aggregation = 48,384 – 28,467= 19,918 Holding cost savings from aggregation = (200)(0.25)(19918) = $995,900 The following table shows the savings as the correlation coefficient increases from 0 to 1 with increments of 0.2 Corr.Coeff. 995876.3 0 0.2 0.4 0.6 0.8 1
4 $979,474 $704,191 $489,462 $307,211 $146,047 $0
Replenishment Lead Time (Weeks) 6 8 10 12 $1,199,606 $1,385,185 $1,548,684 $1,696,498 $862,454 $995,876 $1,113,424 $1,219,694 $599,466 $692,203 $773,907 $847,772 $376,255 $434,462 $485,743 $532,105 $178,870 $206,542 $230,921 $252,961 $0 $0 $0 $0
7
Full file at http://testbanksolutions.org/Solution-Manual-for-Supply-Chain-Management,-4-E-Sunil-Chopra,-PeterMeindl
Excel Worksheet 11-9 illustrates these computations. 10. Using Sea Transportation: Average batch size = DT = (5000)(20) = 100,000
L = L D =
36 ( 4000) = 24,000
ss = FS-1 (CSL) L = FS-1 (0.99) 24000 = 55832 (where, FS-1 (0.99) = NORMSINV (0.99)) Days of safety inventory = 55832/5000 = 11.17 days Average cycle inventory = batch size/2 = 100000/2 = 50,000 Days of cycle inventory = 50000/5000 = 10 days Total inventory cost (cycle + safety) = (50000 + 55832)(100)(0.2) = $2,116,640 Transportation cost per year = (0.5)(5000)(365) = $912,500 Annual Holding Cost + Transportation Cost = $2,116,640 + $912,500 = $3,029,140 In-Transit Inventory = DL = (5000)(36) = 180,000 Cost of Holding In-Transit Inventory = (180000)(100)(0.2) = $3,600,000 Total Costs (including in-transit inventory) = $3,029,140 + $3,600,000 = $6,629,140 Using Air Transportation: Average batch size = DT = (5000)(1) = 5,000
L = L D =
4 ( 4000) = 8,000
ss = FS-1 (CSL) L = FS-1 (0.99) 8000 = 18,611 (where, FS-1 (0.99) = NORMSINV (0.99)) Days of safety inventory = 18611/5000 = 3.72 days Average cycle inventory = batch size/2 = 5000/2 = 2,500 Days of cycle inventory = 2500/5000 = 0.5 days Total inventory cost (cycle + safety) = (2500 + 18611)(100)(0.2) = $422,220
8
Full file at http://testbanksolutions.org/Solution-Manual-for-Supply-Chain-Management,-4-E-Sunil-Chopra,-PeterMeindl
Transportation cost per year = (1.5)(5000)(365) = $2,737,500 Annual Holding Cost + Transportation Cost = $422,220 + $2,737,500 = $3,159,720 In-Transit Inventory = DL = (5000)(4) = 20000 Cost of Holding In-Transit Inventory = (20000)(100)(0.2) = $400,000 Total Costs (including in-transit inventory) = $3,159,720 + $400,000 = $3,559,720 Based on the results air transportation would be the optimal choice, but if Motorola does not have the ownership of in-transit inventory then sea transportation is the optimal choice. Excel Worksheet 11-10 illustrates these computations.
9
Full file at http://testbanksolutions.org/Solution-Manual-for-Supply-Chain-Management,-4-E-Sunil-Chopra,-PeterMeindl
11. Using Sea Transportation: Average batch size = DT = (5000)(20) = 100,000
L =
L T D
=
36 20 ( 4000) = 29,933
ss = FS-1 (CSL) L = FS-1 (0.99) 29933 = 69,635 (where, FS-1 (0.99) = NORMSINV (0.99)) Days of safety inventory = 69635/5000 = 13.93 days OUL = D(T+L) + ss = 5000(36+20) + 69635 = 349,635 Average cycle inventory = batch size/2 = 100000/2 = 50,000 Days of cycle inventory = 50000/5000 = 10 days Total inventory cost (cycle + safety) = (50000 + 69635)(100)(0.2) = $2,392,700 Transportation cost per year = (0.5)(5000)(365) = $912,500 Annual Holding Cost + Transportation Cost = $2,392,700 + $912,500 = $3,305,200 In-Transit Inventory = DL = (5000)(36) = 180,000 Cost of Holding In-Transit Inventory = (180000)(100)(0.2) = $3,600,000 Total Costs (including in-transit inventory) = $3,029,140 + $3,600,000 = $6,905,200 Using Air Transportation: Average batch size = DT = (5000)(1) = 5,000
L =
L T D
=
4 1( 4000) = 8,944
ss = FS-1 (CSL) L = FS-1 (0.99) 8944 = 20,807 (where, FS-1 (0.99) = NORMSINV (0.99)) Days of safety inventory = 20807/5000 = 4.16 days OUL = D(T+L) + ss = 5000(1+4) + 20807 = 45,807 Average cycle inventory = batch size/2 = 5000/2 = 2,500
10
Full file at http://testbanksolutions.org/Solution-Manual-for-Supply-Chain-Management,-4-E-Sunil-Chopra,-PeterMeindl
Days of cycle inventory = 2500/5000 = 0.5 days Total inventory cost (cycle + safety) = (2500 + 20807)(100)(0.2) = $466,150 Transportation cost per year = (1.5)(5000)(365) = $2,737,500 Annual Holding Cost + Transportation Cost = $466,150 + $2,737,500 = $3,203,650 In-Transit Inventory = DL = (5000)(4) = 20000 Cost of Holding In-Transit Inventory = (20000)(100)(0.2) = $400,000 Total Costs (including in-transit inventory) = $3,203,650 + $400,000 = $3,603,650 Based on the results air transportation would be the optimal choice. Even if Motorola does not have the ownership of in-transit inventory, air transportation is the optimal choice. Excel Worksheet 11-11 illustrates these computations. 12. ss = ROP – DL = 750 – 300(2) = 750-600 = 150
L = L D =
2 (100) = 141.42
CSL = F(DL + ss, DL, L) = F(750, 600, 141.42) = NORMDIST (ss/L, 0,1,1) = 85.56%
ESC ss[1 F S (
ss
L
)] L f S (
ss
L
)
ESC = –ss[1 – NORMDIST(ss/L, 0, 1, 1)] + L NORMDIST(ss/L, 0, 1, 0) = 10 Fill rate (fr) = 1- (ESC/Q) = 1- (10/1500) = 0.993 If the ROP increased from 750 to 800 the fill rate will increase to 0.996 Excel Worksheet 11-12 illustrates these computations. 13. Fill rate (fr) = 1- (ESC/1500) = 0.999 So, ESC = 1.5
11
Full file at http://testbanksolutions.org/Solution-Manual-for-Supply-Chain-Management,-4-E-Sunil-Chopra,-PeterMeindl
ESC ss[1 F S (
ss
L
)] L f S (
ss
L
)]
ESC = –ss[1 – NORMDIST(ss/L, 0, 1, 1)] + L NORMDIST(ss/L, 0, 1, 0) = 1.5 We use the GOALSEEK function in determining the safety stock (ss) by using ss as the changing value that results in an ESC value of 1.5. Goal Seek set-up: SET CELL: A15 TO VALUE: 1.5 BY CHANGING CELL: D12 This results in an ss value of 271 and a reorder point of = 300(2) + 271 = 871 Excel Worksheet 11-13 illustrates these computations. 14. (a) Disaggregated Option:
LT
=
L T D
=
3 7 (50) = 158
ss per store = FS-1 (CSL) L = FS-1 (0.99) 158 = 367.83 (where, FS-1 (0.99) = NORMSINV (0.99)) Total safety inventory = (367.83)(25) = 9195.7 Aggregated Option:
DC kD
= (25)(300) = 7500 k
var( D C ) σi2 2 ij i j i 1
i j
CD var(DC )
12
Full file at http://testbanksolutions.org/Solution-Manual-for-Supply-Chain-Management,-4-E-Sunil-Chopra,-PeterMeindl
C D
k =
25 (50) = 250 (we are assuming that
= 0. If is not 0 then the covariance
have to be included)
LT
=
L T DC =
3 7 ( 250) = 791
ss = FS-1 (CSL) L = FS-1 (0.99) 791 = 1839.14 (where, FS-1 (0.99) = NORMSINV (0.99)) Units savings from aggregation = 9195.7 – 1839.14 = 7356.56 Inventory savings = (7356.56) (10) = $73,566 Annual holding cost savings = (73,566 )(0.2) = $14,712 Increase in delivery cost = (300)(25)(365)(0.02) = $54,750 Since the increase in transportation costs outweighs the savings received from aggregation, we do not recommend aggregation for this case. (b) We utilize the same approach as in (a) by changing the daily demand mean and standard deviation to 5 and 4, respectively Units savings from aggregation = 735.66 – 147.13 = 588.52 Inventory savings = (588.52) (10) = $ 5885.2 Annual holding cost savings = ($5885.2 )(0.2) = $1177 Increase in delivery cost = (5)(25)(365)(0.02) = $913 Since the increase in transportation costs does not outweigh the savings received from aggregation, we recommend aggregation for this case. (c) Yes. The benefit from aggregation decreases as increases. When = 0.5, we do not recommend aggregation in both cases. Excel Worksheet 11-14 illustrates these computations. 15. (a) Popular Variant at Large Dealer: Decentralized: ss (at each large dealer) = FS-1 (CSL)
L D = F
S
-1
(0.95)
4 (15) = 49.35
13
Full file at http://testbanksolutions.org/Solution-Manual-for-Supply-Chain-Management,-4-E-Sunil-Chopra,-PeterMeindl
ss (across all large dealers) = (5)(49.35) = 246.73 Popular Variant at Small Dealer: Decentralized: ss (at each small dealer) = FS-1 (CSL)
L D = F
S
(0.95)
-1
4 (5) = 16.45
ss (across all small dealers) = (30)(16.45) = 493.46 (b ) Popular Variant all Inventories Centralized: Demand per period = demand at large dealers + demand at small dealers = (50)(5) + (10)(30) = 550 Standard deviation of demand per period = 5(15) 2 30(5) 2 = 43.30 ss (at regional warehouse) = FS-1 (CSL)
L D = F
S
-1
(0.95)
4 ( 43.30) = 142.45
reduction in safety inventory from complete aggregation = 246.73 + 493.46 – 142.45 = 597.74 holding cost savings per year = (597.74)(20000)(0.2) = $2,390,942.52 production + transportation cost increase per year = (550)(100)(52) = $2,860,000 (c) Popular Variant only Small Dealer Inventories Centralized: Demand per period = demand at small dealers = (10)(30) = 300 Standard deviation of demand per period = 30(5) 2 = 27.39 ss (at regional warehouse) = FS-1 (CSL)
L D = F
S
-1
(0.95)
4 ( 27.39) = 90.09
reduction in safety inventory from small dealer centralization = 493.46 – 90.09 = 403.36 holding cost savings per year = (403.36)(20000)(0.2) = $1,613,440 production + transportation cost increase per year = (300)(100)(52) = $1,560,000 (d) Centralizing inventories from small dealers and decentralizing at large dealers is the optimal strategy (e) Similar analysis can be performed for the uncommon variant (See EXCEL worksheet 11-15 for more details)
14
Full file at http://testbanksolutions.org/Solution-Manual-for-Supply-Chain-Management,-4-E-Sunil-Chopra,-PeterMeindl
(f) For the popular variant, centralize inventories from small dealers and decentralize at large dealers. For the uncommon variant, centralize all inventories. Excel Worksheet 11-15 illustrates these computations. 16. High volume variant without component commonality: ss (for the variant) = FS-1 (CSL)
L D = F
-1
S
(0.95)
4 ( 200) = 657.94
ss (across all high volume variants) = (1)(657.94) = 657.94 Low volume variant without component commonality:
ss (for the variant) = FS-1 (CSL)
L D = F
-1
S
(0.95)
4 ( 20) = 65.79
ss (across all low volume variants) = (9)(65.79) = 592.15 (b & c) With complete commonality: Demand per period = demand for high volume variant + demand for low volume variant = (1000)(1) + (28)(9) = 1252 Standard deviation of demand per period = 1( 200) 2 9( 20) 2 = 208.81 ss = FS-1 (CSL)
L D = F
-1
S
(0.95) 8686.91
reduction in safety inventory from complete commonality = 657.94 + 592.15 – 686.91 = 563.18 holding cost savings per year = (563.18)(1000)(0.2) = $112,635.54 component cost increase per period = (1252)(25)(52) = $1,627,600 additional cost at which complete commonality is justified = 112635.54/(1252)(52) = $1.73 Commonality is not justified across all variants because of increased costs. (d & e) Only low volume variant uses commonality Demand per period = demand for low volume variant = (28)(9) = 252 Standard deviation of demand per period = 9( 20) 2 = 60
15
Full file at http://testbanksolutions.org/Solution-Manual-for-Supply-Chain-Management,-4-E-Sunil-Chopra,-PeterMeindl
ss = FS-1 (CSL)
L D = F
-1
S
(0.95)
4 (60) = 197.38
reduction in safety inventory from low volume variant using commonality = 592.15 – 197.38 = 394.76 holding cost savings per year = (394.76)(1000)(0.2) = $78,952.97 component cost increase per period = (252)(25)(52) = $327,600 additional cost at which complete commonality is justified = 78952.97/(252)(52) = $6.03 Commonality is not justified across low volume variants because of increased costs. Excel Worksheet 11-16 illustrates these computations.
16
Chapter 11: Managing Economies of ScaleUncertainty in athe Supply Chain: Safety Inventory Exercise Solutions 1. DL = LD = (2)(300) = 600
L = L D =
2 ( 200) = 283
ss = FS-1 (CSL) L = FS-1 (0.95) 283 = 465 (where, FS-1 (0.95) = NORMSINV (0.95)) ROP = DL + ss = 600 + 465 = 1065 Excel Worksheet 11-1 illustrates these computations 2. DL = (T+L) D = (2+3)(300) = 1500
L =
T L D
2 3 ( 200) = 447
=
ss = FS-1 (CSL) L = FS-1 (0.95) 447 = 736 (where, FS-1 (0.95) = NORMSINV (0.95)) OUL = D(T+L) + ss = 1500 + 736 = 2236 Excel Worksheet 11-2 illustrates these computations 3. DL = LD = (2)(300) = 600
L = L D =
2 ( 200) = 283
ESC = (1 – fr)Q = (1 – 0.99)500 = 5 We use the following expression to determine the safety stock (ss):
ESC ss[1 F S (
ss
L
)] L f S (
ss
L
)
1
Full file at http://testbanksolutions.org/Solution-Manual-for-Supply-Chain-Management,-4-E-Sunil-Chopra,-PeterMeindl
ESC = –ss[1 – NORMDIST(ss/L, 0, 1, 1)] + L NORMDIST(ss/L, 0, 1, 0). We utilize the GOALSEEK function in EXCEL in determining safety stock (ss) by using ss as the changing value that results in an ESC value of 5. Excel Worksheet 11-3 illustrates these computations. Goal Seek set-up: SET CELL: C29 TO VALUE: 5 BY CHANGING CELL: C27 This results in an ss value of 477 and the reorder point of: ROP = DL + ss = 600 + 477 = 1,077 4. DL = LD = (2)(250) = 500
L = L D =
2 (150) = 212
ss = ROP – ss = 600 – 500 = 100 CSL = F(DL + ss, DL, L) = F(600, 500, 212) = NORMDIST (600, 500, 212, 1) = 0.68
ESC ss[1 F S (
ss
L
)] L f S (
ss
L
)
ESC = –ss[1 – NORMDIST(ss/L, 0, 1, 1)] + L NORMDIST(ss/L, 0, 1, 0) = 43.86 Fill rate (fr) = 1- (ESC/Q) = 1- (43.86/1000) = 0.96 Excel Worksheet 11-4 illustrates these computations 5. DL = LD = (2)(250) = 500 L =
L 2D D 2 s 2L
=
2
2
2
2 150 250 1.5
= 431
ss = FS-1 (CSL) L = FS-1 (0.95) 431 = 709 (where, FS-1 (0.95) = NORMSINV (0.95))
2
Full file at http://testbanksolutions.org/Solution-Manual-for-Supply-Chain-Management,-4-E-Sunil-Chopra,-PeterMeindl
ESC ss[1 F S (
ss
L
)] L f S (
ss
L
)
ESC = –ss[1 – NORMDIST(ss/L, 0, 1, 1)] + L NORMDIST(ss/L, 0, 1, 0) = 9 Fill rate (fr) = 1- (ESC/Q) = 1- (9/1000) = 0.991 Standard deviation of lead time
Required safety inventory
1.50 1.00 0.50 0.00
709 539 405 349
Excel Worksheet 11-5 illustrates these computations 6. Following are the evaluations for the Khaki pants: Disaggregated Option: DL = LD = (4)(800) = 3200
L = L D =
4 (100) = 200
Coefficient of variation = / = 100/800 = 0.13 ss per store = FS-1 (CSL) L = FS-1 (0.95) 200 = 329 (where, FS-1 (0.95) = NORMSINV (0.95)) Total safety inventory = (329)(900) = 296,074 Total value of safety inventory = (296,074)(30) = $8,882,210 Total annual safety inventory holding cost = (8,882,210)(0.25) = $2,220,552 Holding cost per unit sold = 2220552/(800)(900) = $3.08 Aggregated Option:
DC kD
= (900)(800) = 720000
3
Full file at http://testbanksolutions.org/Solution-Manual-for-Supply-Chain-Management,-4-E-Sunil-Chopra,-PeterMeindl
C D
k =
900 (100) = 3000
DL = LDC = (4)(800)(900) = 2,880,000
L =
L DC =
4 (3000) = 6000
ss = FS-1 (CSL) L = FS-1 (0.95) 6000 = 9869 (where, FS-1 (0.95) = NORMSINV (0.95)) Total safety inventory = 9869 Total value of safety inventory = (9869)(30) = $296,070 Total annual safety inventory holding cost = (296070 )(0.25) = $74,018 Holding cost per unit sold = 74018/(800)(900) = $0.1 Savings in the holding cost per unit sold from aggregation = $3.08 - $0.1 = $2.98
Following are the evaluations for the Cashmere Sweaters: Disaggregated Option: DL = LD = (4)(50) = 200
L = L D =
4 (50) = 100
Coefficient of variation = / = 50/50 = 1 ss per store = FS-1 (CSL) L = FS-1 (0.95) 100 = 164 (where, FS-1 (0.95) = NORMSINV (0.95)) Total safety inventory = (164)(900) = 147,600 Total value of safety inventory = (147,600 )(100) = $14,760,000 Total annual safety inventory holding cost = $14,760,000 )(0.25) = $3,690,000 Holding cost per unit sold = $3,690,000 1/(50)(900) = $82 Note: the above are also incorrect on the worksheet. Aggregated Option:
DC kD
= (900)(50) = 45000
4
Full file at http://testbanksolutions.org/Solution-Manual-for-Supply-Chain-Management,-4-E-Sunil-Chopra,-PeterMeindl
C D
k =
900 (50) = 1500
DL = LDC = (4)(50)(900) = 180000
L =
L DC =
4 (1500) = 3000
ss = FS-1 (CSL) L = FS-1 (0.95) 3000 = 4935 (where, FS-1 (0.95) = NORMSINV (0.95)) Total safety inventory = 4935 Total value of safety inventory = (4935)(100) = $493,456 Total annual safety inventory holding cost = (493456)(0.25) = $123,364 Holding cost per unit sold = 123364/(50)(900) = $2.74 Savings in the holding cost per unit sold from aggregation = $82.84 - $2.74 = $79.50 Centralization results in savings for both products, but it is evident that savings in holding cost per unit sold from aggregating Cashmere Sweaters is higher than Khaki pants. So, Cashmere Sweaters are better for centralization. Excel Worksheet 11-6 illustrates these computations. 7. Disaggregated Option: : DL = LD = (8)(3000) = 24000
L = L D =
8 2000 = 5657
ss at = FS-1 (CSL) L = FS-1 (0.95) 5657 = 9305 (where, FS-1 (0.95) = NORMSINV (0.95)) The ss at the other five countries is evaluated in a similar manner, which results in a total ss for Europe of 48,384 Aggregated Option:
5
Full file at http://testbanksolutions.org/Solution-Manual-for-Supply-Chain-Management,-4-E-Sunil-Chopra,-PeterMeindl
D
C
6
Di = 3000 + 4000 + 2000 + 2500+ 1000 + 4000 = 16500
D C
i 1
6
i 1
2 i
=
2000 2 2200 2 1400 2 1600 2 800 2 2400 2 = 4445.22
DL = LDC = (8)(16500) = 132,000
L =
L DC =
8 ( 4445.22) = 12573
ss = FS-1 (CSL) L = FS-1 (0.95) 12573 = 20,681 (where, FS-1 (0.95) = NORMSINV (0.95)) Inventory savings from aggregation = 48,384 – 20,681= 27,704 Excel Worksheet 11-7 illustrates these computations. 8. (a) Disaggregated Option: From the previous problem, we know that the total ss for Europe is 48,384 Holding cost = (200)(0.25)(48384) = $2,419,200 Aggregated Option: ss = 20,681 Holding cost = (200)(0.25)(20681) = $1,034,036 Savings from aggregation = $2,419,200 -$1,034,036 = $1,385,164 (b) If the $5/unit additional cost of assembly from centralization then the total additional costs = (132000)(52)(5) = Savings = $1,385,164 - So, it is not economical to aggregate (c) If the lead time changes to 4 weeks, we evaluate the safety stocks and associated costs in a similar manner. The holding cost from the disaggregated option = (200)(0.25)(34213) = $1,710,650 The holding cost from the aggregated option = (200)(0.25)(14623) = $731,150 Savings from aggregation = $1,710,650 - $731,150 = $979,500 Excel Worksheet 11-8 illustrates these computations.
6
Full file at http://testbanksolutions.org/Solution-Manual-for-Supply-Chain-Management,-4-E-Sunil-Chopra,-PeterMeindl
9. Since the demand at various locations is not independent, we utilize the following expressions for the aggregated option: DC =
ik1 Di k
var(D C ) σi2 2 ij i j i 1
i j
CD var(DC ) For = 0.2
CD var(DC ) =
L =
L DC =
2000 . 2400 2(0.2){(2000)(2200) . (800)(2400) 2
2
20002 . . 24002 2(0.2){(2000)(2200) . . (800)(2400)}
8
= 17307 ss = FS-1 (CSL) L = FS-1 (0.95) 17307 = 28467 (where, FS-1 (0.95) = NORMSINV (0.95)) Inventory savings from aggregation = 48,384 – 28,467= 19,918 Holding cost savings from aggregation = (200)(0.25)(19918) = $995,900 The following table shows the savings as the correlation coefficient increases from 0 to 1 with increments of 0.2 Corr.Coeff. 995876.3 0 0.2 0.4 0.6 0.8 1
4 $979,474 $704,191 $489,462 $307,211 $146,047 $0
Replenishment Lead Time (Weeks) 6 8 10 12 $1,199,606 $1,385,185 $1,548,684 $1,696,498 $862,454 $995,876 $1,113,424 $1,219,694 $599,466 $692,203 $773,907 $847,772 $376,255 $434,462 $485,743 $532,105 $178,870 $206,542 $230,921 $252,961 $0 $0 $0 $0
7
Full file at http://testbanksolutions.org/Solution-Manual-for-Supply-Chain-Management,-4-E-Sunil-Chopra,-PeterMeindl
Excel Worksheet 11-9 illustrates these computations. 10. Using Sea Transportation: Average batch size = DT = (5000)(20) = 100,000
L = L D =
36 ( 4000) = 24,000
ss = FS-1 (CSL) L = FS-1 (0.99) 24000 = 55832 (where, FS-1 (0.99) = NORMSINV (0.99)) Days of safety inventory = 55832/5000 = 11.17 days Average cycle inventory = batch size/2 = 100000/2 = 50,000 Days of cycle inventory = 50000/5000 = 10 days Total inventory cost (cycle + safety) = (50000 + 55832)(100)(0.2) = $2,116,640 Transportation cost per year = (0.5)(5000)(365) = $912,500 Annual Holding Cost + Transportation Cost = $2,116,640 + $912,500 = $3,029,140 In-Transit Inventory = DL = (5000)(36) = 180,000 Cost of Holding In-Transit Inventory = (180000)(100)(0.2) = $3,600,000 Total Costs (including in-transit inventory) = $3,029,140 + $3,600,000 = $6,629,140 Using Air Transportation: Average batch size = DT = (5000)(1) = 5,000
L = L D =
4 ( 4000) = 8,000
ss = FS-1 (CSL) L = FS-1 (0.99) 8000 = 18,611 (where, FS-1 (0.99) = NORMSINV (0.99)) Days of safety inventory = 18611/5000 = 3.72 days Average cycle inventory = batch size/2 = 5000/2 = 2,500 Days of cycle inventory = 2500/5000 = 0.5 days Total inventory cost (cycle + safety) = (2500 + 18611)(100)(0.2) = $422,220
8
Full file at http://testbanksolutions.org/Solution-Manual-for-Supply-Chain-Management,-4-E-Sunil-Chopra,-PeterMeindl
Transportation cost per year = (1.5)(5000)(365) = $2,737,500 Annual Holding Cost + Transportation Cost = $422,220 + $2,737,500 = $3,159,720 In-Transit Inventory = DL = (5000)(4) = 20000 Cost of Holding In-Transit Inventory = (20000)(100)(0.2) = $400,000 Total Costs (including in-transit inventory) = $3,159,720 + $400,000 = $3,559,720 Based on the results air transportation would be the optimal choice, but if Motorola does not have the ownership of in-transit inventory then sea transportation is the optimal choice. Excel Worksheet 11-10 illustrates these computations.
9
Full file at http://testbanksolutions.org/Solution-Manual-for-Supply-Chain-Management,-4-E-Sunil-Chopra,-PeterMeindl
11. Using Sea Transportation: Average batch size = DT = (5000)(20) = 100,000
L =
L T D
=
36 20 ( 4000) = 29,933
ss = FS-1 (CSL) L = FS-1 (0.99) 29933 = 69,635 (where, FS-1 (0.99) = NORMSINV (0.99)) Days of safety inventory = 69635/5000 = 13.93 days OUL = D(T+L) + ss = 5000(36+20) + 69635 = 349,635 Average cycle inventory = batch size/2 = 100000/2 = 50,000 Days of cycle inventory = 50000/5000 = 10 days Total inventory cost (cycle + safety) = (50000 + 69635)(100)(0.2) = $2,392,700 Transportation cost per year = (0.5)(5000)(365) = $912,500 Annual Holding Cost + Transportation Cost = $2,392,700 + $912,500 = $3,305,200 In-Transit Inventory = DL = (5000)(36) = 180,000 Cost of Holding In-Transit Inventory = (180000)(100)(0.2) = $3,600,000 Total Costs (including in-transit inventory) = $3,029,140 + $3,600,000 = $6,905,200 Using Air Transportation: Average batch size = DT = (5000)(1) = 5,000
L =
L T D
=
4 1( 4000) = 8,944
ss = FS-1 (CSL) L = FS-1 (0.99) 8944 = 20,807 (where, FS-1 (0.99) = NORMSINV (0.99)) Days of safety inventory = 20807/5000 = 4.16 days OUL = D(T+L) + ss = 5000(1+4) + 20807 = 45,807 Average cycle inventory = batch size/2 = 5000/2 = 2,500
10
Full file at http://testbanksolutions.org/Solution-Manual-for-Supply-Chain-Management,-4-E-Sunil-Chopra,-PeterMeindl
Days of cycle inventory = 2500/5000 = 0.5 days Total inventory cost (cycle + safety) = (2500 + 20807)(100)(0.2) = $466,150 Transportation cost per year = (1.5)(5000)(365) = $2,737,500 Annual Holding Cost + Transportation Cost = $466,150 + $2,737,500 = $3,203,650 In-Transit Inventory = DL = (5000)(4) = 20000 Cost of Holding In-Transit Inventory = (20000)(100)(0.2) = $400,000 Total Costs (including in-transit inventory) = $3,203,650 + $400,000 = $3,603,650 Based on the results air transportation would be the optimal choice. Even if Motorola does not have the ownership of in-transit inventory, air transportation is the optimal choice. Excel Worksheet 11-11 illustrates these computations. 12. ss = ROP – DL = 750 – 300(2) = 750-600 = 150
L = L D =
2 (100) = 141.42
CSL = F(DL + ss, DL, L) = F(750, 600, 141.42) = NORMDIST (ss/L, 0,1,1) = 85.56%
ESC ss[1 F S (
ss
L
)] L f S (
ss
L
)
ESC = –ss[1 – NORMDIST(ss/L, 0, 1, 1)] + L NORMDIST(ss/L, 0, 1, 0) = 10 Fill rate (fr) = 1- (ESC/Q) = 1- (10/1500) = 0.993 If the ROP increased from 750 to 800 the fill rate will increase to 0.996 Excel Worksheet 11-12 illustrates these computations. 13. Fill rate (fr) = 1- (ESC/1500) = 0.999 So, ESC = 1.5
11
Full file at http://testbanksolutions.org/Solution-Manual-for-Supply-Chain-Management,-4-E-Sunil-Chopra,-PeterMeindl
ESC ss[1 F S (
ss
L
)] L f S (
ss
L
)]
ESC = –ss[1 – NORMDIST(ss/L, 0, 1, 1)] + L NORMDIST(ss/L, 0, 1, 0) = 1.5 We use the GOALSEEK function in determining the safety stock (ss) by using ss as the changing value that results in an ESC value of 1.5. Goal Seek set-up: SET CELL: A15 TO VALUE: 1.5 BY CHANGING CELL: D12 This results in an ss value of 271 and a reorder point of = 300(2) + 271 = 871 Excel Worksheet 11-13 illustrates these computations. 14. (a) Disaggregated Option:
LT
=
L T D
=
3 7 (50) = 158
ss per store = FS-1 (CSL) L = FS-1 (0.99) 158 = 367.83 (where, FS-1 (0.99) = NORMSINV (0.99)) Total safety inventory = (367.83)(25) = 9195.7 Aggregated Option:
DC kD
= (25)(300) = 7500 k
var( D C ) σi2 2 ij i j i 1
i j
CD var(DC )
12
Full file at http://testbanksolutions.org/Solution-Manual-for-Supply-Chain-Management,-4-E-Sunil-Chopra,-PeterMeindl
C D
k =
25 (50) = 250 (we are assuming that
= 0. If is not 0 then the covariance
have to be included)
LT
=
L T DC =
3 7 ( 250) = 791
ss = FS-1 (CSL) L = FS-1 (0.99) 791 = 1839.14 (where, FS-1 (0.99) = NORMSINV (0.99)) Units savings from aggregation = 9195.7 – 1839.14 = 7356.56 Inventory savings = (7356.56) (10) = $73,566 Annual holding cost savings = (73,566 )(0.2) = $14,712 Increase in delivery cost = (300)(25)(365)(0.02) = $54,750 Since the increase in transportation costs outweighs the savings received from aggregation, we do not recommend aggregation for this case. (b) We utilize the same approach as in (a) by changing the daily demand mean and standard deviation to 5 and 4, respectively Units savings from aggregation = 735.66 – 147.13 = 588.52 Inventory savings = (588.52) (10) = $ 5885.2 Annual holding cost savings = ($5885.2 )(0.2) = $1177 Increase in delivery cost = (5)(25)(365)(0.02) = $913 Since the increase in transportation costs does not outweigh the savings received from aggregation, we recommend aggregation for this case. (c) Yes. The benefit from aggregation decreases as increases. When = 0.5, we do not recommend aggregation in both cases. Excel Worksheet 11-14 illustrates these computations. 15. (a) Popular Variant at Large Dealer: Decentralized: ss (at each large dealer) = FS-1 (CSL)
L D = F
S
-1
(0.95)
4 (15) = 49.35
13
Full file at http://testbanksolutions.org/Solution-Manual-for-Supply-Chain-Management,-4-E-Sunil-Chopra,-PeterMeindl
ss (across all large dealers) = (5)(49.35) = 246.73 Popular Variant at Small Dealer: Decentralized: ss (at each small dealer) = FS-1 (CSL)
L D = F
S
(0.95)
-1
4 (5) = 16.45
ss (across all small dealers) = (30)(16.45) = 493.46 (b ) Popular Variant all Inventories Centralized: Demand per period = demand at large dealers + demand at small dealers = (50)(5) + (10)(30) = 550 Standard deviation of demand per period = 5(15) 2 30(5) 2 = 43.30 ss (at regional warehouse) = FS-1 (CSL)
L D = F
S
-1
(0.95)
4 ( 43.30) = 142.45
reduction in safety inventory from complete aggregation = 246.73 + 493.46 – 142.45 = 597.74 holding cost savings per year = (597.74)(20000)(0.2) = $2,390,942.52 production + transportation cost increase per year = (550)(100)(52) = $2,860,000 (c) Popular Variant only Small Dealer Inventories Centralized: Demand per period = demand at small dealers = (10)(30) = 300 Standard deviation of demand per period = 30(5) 2 = 27.39 ss (at regional warehouse) = FS-1 (CSL)
L D = F
S
-1
(0.95)
4 ( 27.39) = 90.09
reduction in safety inventory from small dealer centralization = 493.46 – 90.09 = 403.36 holding cost savings per year = (403.36)(20000)(0.2) = $1,613,440 production + transportation cost increase per year = (300)(100)(52) = $1,560,000 (d) Centralizing inventories from small dealers and decentralizing at large dealers is the optimal strategy (e) Similar analysis can be performed for the uncommon variant (See EXCEL worksheet 11-15 for more details)
14
Full file at http://testbanksolutions.org/Solution-Manual-for-Supply-Chain-Management,-4-E-Sunil-Chopra,-PeterMeindl
(f) For the popular variant, centralize inventories from small dealers and decentralize at large dealers. For the uncommon variant, centralize all inventories. Excel Worksheet 11-15 illustrates these computations. 16. High volume variant without component commonality: ss (for the variant) = FS-1 (CSL)
L D = F
-1
S
(0.95)
4 ( 200) = 657.94
ss (across all high volume variants) = (1)(657.94) = 657.94 Low volume variant without component commonality:
ss (for the variant) = FS-1 (CSL)
L D = F
-1
S
(0.95)
4 ( 20) = 65.79
ss (across all low volume variants) = (9)(65.79) = 592.15 (b & c) With complete commonality: Demand per period = demand for high volume variant + demand for low volume variant = (1000)(1) + (28)(9) = 1252 Standard deviation of demand per period = 1( 200) 2 9( 20) 2 = 208.81 ss = FS-1 (CSL)
L D = F
-1
S
(0.95) 8686.91
reduction in safety inventory from complete commonality = 657.94 + 592.15 – 686.91 = 563.18 holding cost savings per year = (563.18)(1000)(0.2) = $112,635.54 component cost increase per period = (1252)(25)(52) = $1,627,600 additional cost at which complete commonality is justified = 112635.54/(1252)(52) = $1.73 Commonality is not justified across all variants because of increased costs. (d & e) Only low volume variant uses commonality Demand per period = demand for low volume variant = (28)(9) = 252 Standard deviation of demand per period = 9( 20) 2 = 60
15
Full file at http://testbanksolutions.org/Solution-Manual-for-Supply-Chain-Management,-4-E-Sunil-Chopra,-PeterMeindl
ss = FS-1 (CSL)
L D = F
-1
S
(0.95)
4 (60) = 197.38
reduction in safety inventory from low volume variant using commonality = 592.15 – 197.38 = 394.76 holding cost savings per year = (394.76)(1000)(0.2) = $78,952.97 component cost increase per period = (252)(25)(52) = $327,600 additional cost at which complete commonality is justified = 78952.97/(252)(52) = $6.03 Commonality is not justified across low volume variants because of increased costs. Excel Worksheet 11-16 illustrates these computations.
16
More Documents from "Sarah Sarah" 6t3060
The Titans Video Sheet Questions_key 35473f
October 2022 0
Edoc.site_solution-manual-for-supply-chain-management-4-e-su.pdf 3v3k4d
December 2021 0
Chapter 6 Outline Answers 6sy2b
November 2019 69
F5 Big Ip Manual Pdf 2r52y
December 2019 43
Free Pdf Cracker V3 0 2c4f67
December 2019 28