Bullivants Lifting Hardware 4m6266
This document was ed by and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this report form. Report l4457
Overview 6h3y3j
& View Bullivants Lifting Hardware as PDF for free.
More details h6z72
- Words: 15,291
- Pages: 42
05 - HARDWARE
Shackles Eyebolts Eyenuts, Lifting Loops & Concrete Lifting Eyes Rigging Screws & Turnbuckles Wire Rope Terminations Thimbles Ferrules NCG Cable Stockings Sheave Blocks Hooks
106 - 147
Shackles
Grade M Black Screw Dee Shackles: Unit of Measure - Each
WLL (tonnes)
D (mm)
W (mm)
L (mm)
10
13
25
Screw 0.09
160629
3/8”
9.53
0.50
13
19
38
Screw 0.18
160630
1/2”
12.70
0.75
16
28
54
Screw 0.37
160631
5/8”
15.88
1.50
19
32
63
Screw 0.66
160632
3/4”
19.05
2.00
22
38
73
Screw 1.04
160634
7/8”
22.23
3.00
25
44
83
Screw 1.61
160639
1”
25.40
3.80
29
51
95
Screw 2.27
160640 1 1/8” 28.58
5.00
32
54 105 Screw 3.24
05 - HARDWARE
Weight (kg)
Size d (mm)
0.25
Closing Method
Size d (in.)
6.35
Other sizes available. Tolerances on Dimensions +8% - 5% as per AS2741.
WLL (tonnes)
D (mm)
W (mm)
L (mm)
Weight (kg)
Grade M Galvanised Screw Dee Shackles: Unit of Measure - Each
Size d (mm)
The colour of the Shackle pin is related to the supplier and not the Standards.
1/4”
Size d (in.)
• Ensure that all markings are clearly legible. • Ensure pin is the correct type. Never replace the pin of a shackle with a bolt. • The threads of the pin and body are undamaged and the pin screws freely into position. • The body and pin is not unduly worn and free from distortion, nicks, gouges, cracks and excessive wear and corrosion. • The pin is screwed tightly with the collar and the pin is bedded evenly on the surface of the shackle eye. • The correct type of pin is used for the application. • A bolt type shackle has a split cotter (safety pin) attached correctly. • Shackles should not be heat treated as this may affect their working load limit. • Never modify, repair or reshape a shackle by welding, heating or bending as this will affect the working load limit.
160638
ORDER CODE
Screw Pin Shackles mainly used for non-permanent applications. Bolt with Safety Pin Shackles preferable for long term or permanent applications or where the load may slide on the pin causing rotation to the pin. Also used on equipment that may vibrate to ensure pin does not become dislodged. Dee Shackles only used for single leg applications - never multi leg as the body and pin may distort. Bow Shackles can be used on either single or multi-leg applications. Grade M Shackles generally comply with AS2741. In accordance with AS2741 shackles should be marked with ://PDQXIDFWXUHUVLGHQWL¿FDWLRQJUDGHRIPDWHULDODQGEDWFK number. Grade S Shackles generally comply with Australian Standard 2741 with approximately twice the working load limit of Grade M Shackles. In accordance with AS2741 shackles should EHPDUNHGZLWK://PDQXIDFWXUHUVLGHQWL¿FDWLRQJUDGHRI material and batch number. Commercial Grade Shackles are not to be used for lifting purposes. Stainless Steel Shackles are not to be used for lifting purposes. Care & Use
ORDER CODE
A shackle is used for interconnecting components in lifting, tensioning and staying systems. A shackle consists of a body, a removable pin and any applicable locking device. Types of Shackles
160628
1/4”
6.35
0.25
10
13
25
0.09
160625
3/8”
9.53
0.50
13
19
38
0.18
160626
1/2”
12.70
0.75
16
28
54
0.37
160627
5/8”
15.88
1.50
19
32
63
0.66
160633
3/4”
19.05
2.00
22
38
73
1.04
160635
7/8”
22.23
3.00
25
44
83
1.61
160636
1”
25.40
3.80
29
51
95
2.27
160637 1 1/8” 28.58
5.00
32
54
105
3.24
160644 1 1/4” 31.75
6.00
35
60
114
4.5
160641 1 3/8” 34.93
7.00
38
67
127
6.18
160642 1 1/2” 38.10
9.50
44
70
137
8.22
Other sizes available.
WWW.BULLIVANTS.COM
107
ORDER CODE
Size d (mm)
WLL (tonnes)
D (mm)
W (mm)
B (mm)
L (mm)
Weight (kg)
160554
5
0.33
6
10
15
22
0.02
160555
6
0.50
8
12
20
29
0.06
160556
8
0.75
10
13
21
31
0.11
160557
10
1.00
11
17
26
37
0.15
160558
11
1.50
13
18
29
43
0.21
160559
13
2.00
16
21
33
48
0.37
160560
16
3.25
19
27
43
61
0.65
160561
19
4.70
22
32
51
72
1.06
160562
22
6.50
25
37
58
84
1.56
160563
25
8.50
29
43
68
95
2.32
160573
29
9.50
32
46
74
108
3.30
160564
32
12.00
35
52
83
119
4.51
160574
35
13.50
38
57
92
133
5.93
160575
38
17.00
41
60
98
146
7.89
160577
44
25.00
51
73
127
178
14.99
160600
51
35.00
57
83
146
197
18.85
Other sizes available.
Size d (mm)
WLL (tonnes)
D (mm)
W (mm)
L (mm)
Weight (kg)
Grade S Tested Galvanised Screw Dee Shackles: Unit of Measure - Each ORDER CODE
05 - HARDWARE
Grade S Tested Galvanised Screw Bow Shackles: Unit of Measure - Each
160508
6
0.50
8
12
22
0.60
160509
8
0.75
10
13
26
0.11
160510
10
1.00
11
17
32
0.15
160511
11
1.50
13
18
37
0.21
160512
13
2.00
16
21
41
0.37
160513
16
3.20
19
27
51
0.65
160514
19
4.70
22
32
60
1.06
160515
22
6.50
25
37
71
1.56
160516
25
8.50
29
43
81
2.32
160528
29
9.50
32
46
90
3.28
160517
32
12.00
35
52
100
4.51
160529
35
13.50
38
57
113
5.93
160531
38
17.00
41
60
124
7.89
160532
44
25.00
51
73
146
14.99
Other sizes available.
108
1300 722 999
Size d (mm)
WLL (tonnes)
D (mm)
w (mm)
B (mm)
L (mm)
Weight (kg)
160565
13
2.00
16
21
33
48
0.44
160567
16
3.25
19
27
43
61
0.79
160569
19
4.75
22
32
51
72
1.06
160570
22
6.50
25
37
58
84
1.88
160572
25
8.50
29
43
68
95
2.78
160589
29
9.50
32
46
74
108
3.87
160591
32
12.00
35
52
83
119
5.26
160594
35
13.50
38
57
92
133
6.94
160595
38
17.00
41
60
98
146
8.79
160576
44
25.00
51
73
127
178
14.99
160598
51
35.00
57
83
146
197
20.65
160618
57
42.50
63
95
160
222
29.10
160602
63
55.00
70
105
184
267
41.05
160604
76
85.00
83
127
200
330
62.24
165024
89
120.00
95
146
241
381
110.00
05 - HARDWARE
ORDER CODE
Grade S Tested Galvanised Safety Pin Bow Shackles: Unit of Measure - Each
Other sizes available.
Green Pin Shackles
ORDER CODE
Size (in.)
Size (mm)
WLL (tonnes)
Pin Dia. (mm)
Weight (kg)
Van Beest manufacture high quality Green Pin® Shackles. The Shackles can be LGHQWL¿HGE\WKHJUHHQFRORXUHGSLQDQGWKHPDUNLQJVRQWKHVKDFNOHERG\DQG pin. Galvanised Safety Pin Bow Shackles: Unit of Measure - Each
160581
3/8”
10
1.00
11
0.16
160605
7/16”
11
1.50
13
0.22
160584
1/2”
13
2.00
16
0.42
160585
5/8”
16
3.25
19
0.74
160607
3/4”
19
4.75
22
1.18
160608
7/8”
22
6.50
25
1.77
160587
1”
25
8.50
28
2.58
160592
1 1/4”
32
12.00
35
4.91
160599
2”
51
35.00
57
19.85
160619
2 1/4”
57
42.50
65
28.33
160603
2 1/2”
65
55.00
70
39.59
160623
3 1/2”
95
120.00
95
110.00
160624
4”
105
150.00
108
160.00
Other sizes available.
WWW.BULLIVANTS.COM
109
ORDER CODE
Size (in.)
Size (mm)
WLL (tonnes)
Pin Dia. (mm)
Weight (kg)
160578
3/16”
5
0.33
6
0.02
160579
1/4”
6
0.50
8
0.05
160580
5/16”
8
0.75
10
0.10
160582
3/8”
10
1.00
11
0.14
160583
7/16”
11
1.50
13
0.19
160566
1/2”
13
2.00
16
0.36
160568
5/8”
16
3.25
19
0.63
160586
3/4”
19
4.75
22
1.01
160571
7/8”
22
6.50
25
1.50
160588
1”
25
8.50
28
2.21
160590
1 1/8”
29
9.50
32
3.16
160593
1 1/4”
32
12.00
35
4.31
160613
1 3/8”
35
13.50
38
5.55
160596
1 1/2”
38
17.00
42
7.43
160597
1 3/4”
45
25.00
50
12.84
160601
2”
51
35.00
57
18.15
Other sizes available.
Size (in.)
Size (mm)
WLL (tonnes)
Pin Dia. (mm)
Weight (kg)
Galvanised Screw Dee Shackles: Unit of Measure - Each ORDER CODE
05 - HARDWARE
Galvanised Screw Bow Shackles: Unit of Measure - Each
160518
1/4”
6
0.50
6
0.05
160519
5/16”
8
0.75
10
0.09
160520
3/8”
10
1.00
11
0.14
160521
7/6”
11
1.50
13
0.19
160523
1/2”
13
2.00
16
0.32
160524
5/8”
16
3.25
19
0.54
160525
3/4”
19
4.75
22
0.87
160526
7/8”
22
6.50
25
1.34
160530
1 3/8”
35
13.50
38
5.14
160533
1 3/4”
44
25.00
50
11.45
Other sizes available.
110
1300 722 999
ORDER CODE
Nom. Size (in.)
WLL (tonnes) *
Weight Each (kg)
Crosby G-2130 Safety Shackles: Unit of Measure - Each
160676
1/2
2
0.36
20.6
16.0
47.8
12.7
33.3
30.2
83.5
58.5
12.7
3.30
1.50
160701
5/8
3-1/4
0.62
26.9
19.1
60.5
16.0
42.9
38.1
106.0
74.5
17.5
6.35
1.50
160702
3/4
4-3/4
1.23
31.8
22.4
71.5
19.1
51.0
46.0
126.0
89.0
20.6
6.35
1.50
160703
7/8
6-1/2
1.79
36.6
25.4
84.0
22.4
58.0
53.0
148.0
102.0
24.6
6.35
1.50
160704
18
8-1/2
2.28
42.9
28.7
95.5
25.4
68.5
60.5
167.0
119.0
26.9
6.35
1.50
160705
1-1/8
9-1/2
3.75
46.0
31.8
108.0
28.7
74.0
68.5
190.0
131.0
31.8
6.35
1.50
160706
1-1/4
12
5.31
51.5
35.1
119.0
31.8
82.5
76.0
210.0
146.0
35.1
6.35
1.50
160707
1-3/8
13-1/2
7.18
57.0
38.1
133.0
35.1
92.0
84.0
233.0
162.0
38.1
6.35
3.30
160708
1-1/2
17
8.62
60.5
41.4
146.0
38.1
98.5
92.0
254.0
175.0
41.1
6.35
3.30
160709
1-3/4
25
15.4
73.0
51.0
178.0
44.5
127.0
106.0
313.0
225.0
57.0
6.35
3.30
160710
2
35
23.7
82.5
57.0
197.0
51.0
146.0
122.0
348.0
253.0
61.0
6.35
3.30
Tolerance +/-
A
B
C
D
E
F
H
L
N
C
A
* NOTE: Maximum Proof Load is 2.0 times the Working Load Limit. Minimum Ultimate Strength is 6 times the Working Load Limit.
ORDER CODE
WLL (tonnes)*
Weight Each (kg)
Crosby G-209R ROV Shackles: Unit of Measure - Each
160711
6-1/2
1.79
36.6
25.4
84.0
148
102
50
58
17
10
160712
8-1/2
2.28
42.9
28.7
95.5
167
119
50
61
18
10
160713
9-1/2
3.75
46.0
31.8
108
190
131
70
83
18
12
160714
12
5.31
51.5
35.1
119
210
146
70
84
23
12
160715
13-1/2
7.18
57.0
38.1
133
233
162
75
91
23
15
160716
17
9.43
60.5
41.4
146
254
175
75
93
24
15
160717
†25
15.4
73.0
51.0
178
313
225
90
114
29
17.5
160718
†35
23.7
82.5
57.0
197
348
253
106
132
30
20
160719
†55
44.6
105
70.0
267
453
327
120
145
45
25
Dimensions (mm)
A +/- 6.35
B
C
H
L
O
P
S
T
* Minimum Ultimate Load is 5 times the Working Load Limit. † Furnished with Galvanized Finish.
WWW.BULLIVANTS.COM
111
05 - HARDWARE
Dimensions (mm)
Commercial Grade Shackles Galvanised Screw Pin Bow Shackles Commercial Grade: Unit of Measure - Each
Gunnebo Standard Shackle No. 855 : Unit of Measure - Each
ORDER CODE
Size (mm)
Grade
Weight (kg)
160666
5
Untested
0.28
160658
6
Untested
0.34
160659
8
Untested
0.70
160660
10
Untested
0.13
160661
12
Untested
0.26
160662
16
Untested
0.50
160663
20
Untested
0.80
Other sizes available.
Standard: • U.S. Fed. Spec. RR.C-271/EN-13889 • DNV 2.7-1 Type Approval No. • S-5661 (WLL 2.0 to 25 tonnes) Material: • High Tensile strength • Quenched and Tempered, Grade 6 Finish: • All parts hot dip galvanised • Brown colour marking Documentation: ‡7HVWFHUWL¿FDWHDQGWUDFHDEOHFHUWL¿FDWHRI WKHERZDQGWKHEROWLQ¿QLVKHGFRQGLWLRQ Temperature:
112
WLL (tonnes)
kgs/100 pcs
Gunnebo Part No.
0.50
7
A085506
160814
8
0.75
13
A085508
160815
9
1.00
17
A085509
160816
11
1.50
25
A085511
160817
13
2.00
42
A085513
160818
16
3.25
70
A085516
19
4.75
120
A085519
160820
22
6.50
170
A085522
160821
25
8.50
250
A085525
Weight (kg)
6
160819
Grade
160813
Size (mm)
Not approved for lifting applications.
Nominal Size
Galvanised Screw Pin Dee Shackles Commercial Grade: Unit of Measure - Each
ORDER CODE
• -20°C to 200°C
ORDER CODE
05 - HARDWARE
Not approved for lifting applications.
160654
5
Untested
0.19
160822
28
9.50
340
A085528
160651
6
Untested
0.34
160823
32
12.00
480
A085532
160652
8
Untested
0.70
160824
35
13.50
700
A085535
160653
10
Untested
0.13
160825
38
17.00
900
A085538
160655
12
Untested
0.24
160826
45
25.00
1500
A085545
160656
16
Untested
0.55
160827
50
35.00
2100
A085552
160657
20
Untested
0.80
160828
57
42.50
2900
A085556
160664
22
Untested
1.30
160829
65
55.00
4100
A085564
160665
25
Untested
2.00
160830
75
85.00
6200
A085576
160831
89
120
11000
A085589
1300 722 999
Gunnebo Arctic Shackle No. 856: Unit of Measure - Each
Gunnebo Super Shackle No. 858: Unit of Measure - Each
Standard:
Standard:
• U.S. Fed. Spec. RR.C-271/EN-13889 • DNV 2.7-1 Type Approval No. • S-5661 (WLL 2.0 to 25 tonnes) Material:
• U.S. Fed. Spec. RR.C-271 • Type IVA Class 3, Grade B Material: • High Tensile Steel. • Quenched and Tempered, Grade 8 Finish:
• Special Alloy Steel, • Quenched and Tempered, Grade 8 Finish:
• 5:1 Documentation:
‡7HVWFHUWL¿FDWHDQGWUDFHDEOHFHUWL¿FDWHRI WKHERZDQGWKHEROWLQ¿QLVKHGFRQGLWLRQ Temperature:
Gunnebo Part No.
0.42
A085613
160833
5/8” - 16
3.30
0.70
A085616
160844
3/4” - 19
4.80
1.20
A085619
160845
7/8” - 22
6.50
1.70
A085622
160846
1” - 25
8.50
2.50
A085625
160847
1.1/8” - 28
9.50
3.40
A085628
160848
1.1/4” - 32
12.00
4.80
A085632
160849
1.3/8” - 35
13.50
7.00
A085635
160850
1.1/2” - 38
17.00
9.00
A085638
160851
1.3/4” - 45
25.00
15.00
A085645
160852
2” - 50
35.00
21.00
A085652
160853
2 1/2” - 65
55.00
41.00
A085664
160854
3” - 75
85.00
62.00
A085676
Gunnebo Part No.
Weight (kgs)
2.00
Weight(kgs)
WLL (tonnes)
1/2” - 13
WLL (tonnes)
Nominal Size
160832
Nominal Size
ORDER CODE
• -40°C to 200°C
ORDERCODE
‡7HVWFHUWL¿FDWHDQGWUDFHDEOH
160855
1/2” - 13
3.30
0.42
A085813
160856
5/8” - 16
5.00
0.70
A085816
160857
3/4” - 19
7.00
1.20
A085819
160858
7/8” - 22
9.50
1.70
A085822
160859
1” - 25
12.50
2.50
A085825
160860
1.1/8” - 28
15.00
3.40
A085828
160861
1.1/4” - 32
18.00
4.80
A085832
160862
1.3/8” - 35
21.00
7.00
A085835
160863
1.1/2” - 38
30.00
8.80
A085838
160864
1.3/4” - 45
40.00
15.00
A085845
160865
2” - 57
55.00
22.00
A085857
160866
2.1/2” - 70
85.00
38.00
A085870
160867
3.1/4” - 83
120
70.00
A085883
160868
4” - 95
150
110
A085895
All lifting shackles conforming to AS2741 are recognisable by markings showing - WLL, manufacturers id, grade of material and batch number - and will have a larger pin material than the body of the shackle. If in doubt Bullivants who have a trained team on hand to assist with your compliance and safety.
WWW.BULLIVANTS.COM
113
05 - HARDWARE
• All parts hot dip galvanised • Brown colour marking Safety factor:
• All parts hot dip galvanised • Brown colour marking Documentation:
Gunnebo ROV Shackle No. 860: Unit of Measure - Each
RUD VIP Foolproof Shackles - VV - GSCH: Unit of Measure - Each
Material:
Weight (kgs)
Gunnebo Part No.
32
12
4.80
A086032
160870
38
17
9.00
A086038
160871
45
25
15.00
A086045
160872
50
35
20.00
A086052
160873
65
55
41.00
A086064
RUD Part No.
WLL (tonnes)
160869
WLL (tonnes)
Nominal Size
‡7HVWFHUWL¿FDWHDQGWUDFHDEOH ‡FHUWL¿FDWHFDQEHVXSSOLHG ORDER CODE
05 - HARDWARE
• 5:1 Documentation:
Chain Size (mm)
• All parts hot dip galvanised • Brown colour marking Safety factor:
ORDER CODE
• Clevis mounting • Bolt-pin retained by roll-pin for extra security
• High Tensile Steel. • Quenched and Tempered Finish:
121911
6
1.5
VV GSCH 6
121912
8
2.5
VV GSCH 8
121913
10
4.0
VV GSCH 10
121914
13
6.7
VV GSCH 13
121915
16
10.0
VV GSCH 16
121916
20
16.0
VV GSCH 20
121626
22
20.0
VV GSCH 22
Secured with threads and lock pin.
Eyebolts
Care & Use
Eyebolts of 12mm or smaller should not be used in general lifting, staying or tensioning purposes, because high torsional stresses are easily induced in smaller sizes by being screwed up too tightly. When installing an eyebolt it should be screwed fully down to the face of the lifted load. Types of Eyebolts
• WLL markings are clear and suit the application. • Conduct a visual inspection for deformation and cracking. • Conduct a visual inspection of the inside eye for wear. • Conduct a visual inspection and check for damaged threads. • Ensure the thread centre is aligned with centre of eye. • Ensure the eyebolt’s thread form and the thread form in the corresponding hole or nut is the same. • Avoid excessive tightening of eyebolts. • Metric and imperial eyebolts that conform to the; Australian Standard have a safety factor of 6:1, DIN Standard have a safety factor of 5:1 and Grade 100 have a safety factor of 4:1. • When using eyebolts in pairs, it is essential that care be taken to properly align them. Eyebolts must not be forced into alignment as overstress will cause a reduction in the WLL. • A continuous sling should not be used with pairs of eyebolts. When lifting with pairs of eyebolts ed by slings, always use slings with individual lengths. Eyebolts should be inspected periodically by a competent person as per AS2317.
Forged Collared Eyebolts generally complies with AS2317. In accordance with AS2317 eyebolts should be marked with PDQXIDFWXUHUVLGHQWL¿FDWLRQWKUHDGW\SHQRPLQDOVL]HDQG WLL. DIN Standard 580/582 Eyebolts these eyebolts can be used for lifting but do not conform to AS2317. Normally supplied with metric coarse thread. Commercial Grade Eyebolts are not to be used for lifting purposes and should not be used for ing loads. Stainless Steel Eyebolts are not to be used for lifting purposes. *HQHUDOO\VXSSOLHGLQ*UDGH7KHVH¿WWLQJVDUHORDGUDWHG and can be used for tensioning.
114
1300 722 999
Lifting Collared Eyebolts - AS2317: Unit of Measure - Each
Metric Nominal Size (mm)
Imperial Nominal (in.)
WLL Axial (t)
Trunion Type Mounting WLL (tonnes)
Perpendicular Type Mounting WLL (tonnes)
0º to 30º WLL (tonnes)
31º to 60º WLL (tonnes)
61º to 90º WLL (tonnes)
Thread Pitch
Net Weight (kg)
164178
M10
3/8”
0.25
0.06
0.12
0.31
0.2
0.12
1.5
0.06
164170
M12
1/2”
0.4
0.1
0.2
0.5
0.32
0.2
1.75
0.15
164172
M16
5/8”
0.8
0.2
0.4
1
0.64
0.4
2
0.28
164184
M20
3/4”
1.6
0.4
0.8
2
1.28
0.8
2.5
0.46
164197
M22
7/8”
2
0.5
1
2.5
1.6
1
2.5
0.85
164185
M24
1”
2.5
0.62
1.25
3.1
2
1.25
3
1.1
164201
M30
1 1/8”
4
1
2
5
3.2
2
3.5
2.1
164302
M36
n/a
6.3
1.57
3.1
7.9
5
3.1
4
3.7
0.4
0.25
Reduction factor for single eyebolt use 1 BSW Lifting Collared Eyebolts: Unit of Measure - Each
0.25
0.25
0.63
UNC Thread Lifting Collared Eyebolts: Unit of Measure - Each
General Purpose Zinc Eyebolts: Unit of Measure - Each
ORDER CODE
Size (in.)
WLL (tonnes)
Thread Pitch
Net Weight (kg)
ORDER CODE
Size (in.)
WLL (tonnes)
Thread Pitch
Net Weight (kg)
ORDER CODE
Size (mm)
Thread Pitch
Net Weight (kg)
Not approved for lifting applications.
164176
3/8
0.25
16
0.06
164177
3/8
0.25
16
0.06
164191
M8
1.25
0.03
164179
1/2
0.4
12
0.14
164171
1/2
0.4
13
0.15
164263
M10
1.5
0.06
164180
5/8
0.8
11
0.32
164181
5/8
0.8
11
0.28
164193
M12
1.75
0.13
164182
3/4
1.6
10
0.53
164183
3/4
1.6
10
0.46
164278
M16
2
0.21
164198
7/8
2
9
0.85
164199
7/8
2
9
0.85
164286
M20
2.5
0.38
164200
1
2.5
8
1.1
164186
1
2.5
8
1.1
164291
M24
3
0.83
164202
1 1/4
5
7
2.2
164203
1 1/2
7
6
3.7
Other sizes available.
Other sizes available.
WWW.BULLIVANTS.COM
115
05 - HARDWARE
ORDER CODE
Ensure that eyebolts are not screwed into threaded holes of a different size or type of thread.
RUD Starpoint Eyebolts - Grade 100 - VRS-F: Unit of Measure - Each
RUD Eyebolt - Grade 80 - RS: Unit of Measure - Each
WLL F1 (kg)
WLL F2 (kg)*
C (mm)
D (mm)
RUD Part No.
164445
400
100
12
25
RS-M6
1600
400
18
30
RS-M12
164446
3000
750
21
35
RS-M14
164280
4000
1000
24
35
RS-M16
RUD Part No.
164194
L (mm)
RS-M8 RS-M10
K (mm)
25 25
164264
D (mm)
12 15
WLL F2 (kg)*
200 250
WLL F1 (kg)
800 1000
ORDER CODE
164255
164234
1000
400
25
47
12
VRS-F-M8
164287
6000
1500
30
40
RS-M20
164235
1000
400
25
47
15
VRS-F-M10
164293
8000
2000
36
50
RS-M24
164238
2000
750
30
56
18
VRS-F-M12
164298 12000 3000
45
60
RS-M30
54
90
RS-M36
164243
4000
1500
35
65
24
VRS-F-M16
164303 16000 4000
164245
6000
2300
40
75
30
VRS-F-M20
164307 24000 6000
63
90
RS-M42
164447 32000 8000
68
90
RS-M48
164247
8000
3200
48
90
36
VRS-F-M24
164396 12000 4500
60
112
45
VRS-F-M30
Eyenuts, Lifting Loops & Concrete Lifting Eyes
164397 16000 7000
72
135
54
VRS-F-M36
RUD Weld-On Eye Plates - VRBS: Unit of Measure - Each
164398 24000 9000
82
158
63
VRS-F-M42
164266 32000 12000
94
180
72
VRS-F-M48
RUD Starpoint Eyebolt - UNC Imperial Thread - VRS-F: Unit of Measure - Each
WLL F1 (kg)
WLL F2 (kg)*
D (mm)
K (mm)
L (mm)
RUD Part No.
164236
1000
400
25
47
15
VRS-F 3/8” UNC
164239
2000
750
30
56
18
VRS-F 1/2” UNC
165460
4000
1500
35
63
24
VRS-F 5/8” UNC
165461
6000
2300
40
75
30
VRS-F 3/4” UNC
164391
6000
2300
40
75
32
VRS-F 7/8” UNC
ORDER CODE
WLL (kg)
B (mm)
D (mm)
E (mm)
Weight (kg)
• Starpoint Eye Bolt with locking component (UNC thread) • 360° rotation • *Stamped with F2 WLL ORDER CODE
165462
8000
3200
48
90
36
VRS-F 1” UNC
165041
4000
16
48
135
0.8
VRBS - 4
6700
20
60
170
1.8
VRBS - 6.7
65
195
2.8
VRBS - 10
• Multi-directional loading • Rated capacity can be • Weld-on design LQFUHDVHGLQVSHFL¿F • Forged alloy steel load ring lashing applications ‡5LQJIROGVÀDW RUD Part No.
05 - HARDWARE
• 1 to 32 tonne • Multi-directional threaded design • *Stamped with F2 WLL • Adjusts to direction of pull • Can be used for both axial and angular loading ‡8QLTXHNH\GHVLJQIRUHDV\¿WWLQJ • Available in metric and UNC thread sizes
ORDER CODE
• Can be used for both axial and angular loading • Metric (coarse) threads • Rated for use in both single-part and multi-part lifts • *Stamped with F2 WLL.
164248 12000 4500
60
112
45
VRS-F 1 1/4” UNC
165042
165463 16000 7000
72
135
54
VRS-F 1 1/2” UNC
165043 10000
22
165464 24000 9000
82
158
63
VRS-F 1 3/4” UNC
165044 16000
30
90
266
6.6
VRBS - 16
165045 30000
42
130
375
19
VRBS - 30
165449 50000
70
250
620
85.0
VRBS - 50
165465 32000 12000
116
94
180
72
VRS-F 2” UNC
1300 722 999
Nominal Size (kg)
Grade
C (mm)
H (mm)
T (mm)
164347
300
10.9
34
11
75
VLBG 0.3t M8
164220
630
10.9
34
16
75
VLBG 0.63t M10
164222
1000
10.9
34
21
75
VLBG 1t M12
164399
1500
10.9
36
24
85
VLBG 1.5t M16
164400
2500
10.9
54
32
110
VLBG 2.5t M20
164401
4000
10.9
54
37
125
VLBG 4t M24
164402
4000
10.9
65
39
147
VLBG 4t M27
164403
5000
10.9
65
49
147
VLBG 5t M30
164404
7000
8.8*
65
52
146
VLBG 7t M36
164365
8000
10.9
82
63
197
VLBG 8t M36
164369
10000
10.9
80
73
162
VLBG 10t M42
164405
15000
10.9
100
63
222
VLBG 15t M42
164406
20000
10.9
100
73
222
VLBG 20t M48
05 - HARDWARE
RUD Part No.
ORDER CODE
RUD Uni Directional Ring Bolts - Grade 100: Unit of Measure - Each • 0.3 - 20 tonne • Load ring manufactured from • Omni directional Grade 80 material • Simple mounting with only • Rotates through 360° one hole required • Fully rated for loading in • Compact design any direction • In-built clamping spring secures • Available in metric and ULQJLQÀDWSRVLWLRQ UNC thread sizes • Longer bolts available for all sizes
*Captive bolt: VLBG automatically turns in direction of load
ORDER CODE
Nominal Size (kg)
Grade
C (mm)
H (mm)
T (mm)
RUD Part No.
RUD Ring Bolt with Longer Vario Bolts - VLBG: Unit of Measure - Each
165466
300
10.9
34
60
75
VLBG 0.3 M8 With Vario Bolt (H Max = 60)
165467
630
10.9
34
77
75
VLBG 0.63 M10 With Vario Bolt (H Max = 77)
165468
1000
10.9
34
91
75
VLBG 1 M12 With Vario Bolt (H Max = 91)
421252
1500
10.9
36
116
85
VLBG 1.5 M16 With Vario Bolt (H Max = 116)
421253
2500
10.9
54
152 110
VLBG 2.5 M20 With Vario Bolt (H Max 152)
421254
4000
10.9
54
176 125
VLBG 4 M24 With Vario Bolt (H Max = 176)
165469
5000
10.9
65
213 147
VLBG 5 M30 With Vario Bolt (H Max = 213)
421255
8000
10.9
82
421256 10000 10.9
80
158 197 VLBG 8 M36 With Vario Bolt (H Max = 158) 198 162 VLBG 10 M42 With Vario Bolt (H Max = 198)
165470 15000 10.9 100 188 222 VLBG 15 M42 With Vario Bolt (H Max = 188) 165471 20000 10.9 100 223 222 VLBG 20 M48 With Vario Bolt (H Max = 223)
Nominal Size (kg)
C (mm)
H (mm)
T (mm)
164221
1000
34
22
75
VLBG-Z 1 1/2” UNC
164223
1500
36
24
85
VLBG-Z 1.5 5/8” UNC
164226
2500
54
28
110
VLBG-Z 2.5 3/4” UNC
164353
2500
54
27
110
VLBG-Z 2.5 7/8” UNC
164228
4000
54
41
125
VLBG-Z 4 1” UNC
165482
5000
82
41
147
VLBG-Z 5 1 1/4” UNC
WWW.BULLIVANTS.COM
RUD Part No.
ORDER CODE
RUD Ring Bolt with UNC Bolt (Imperial) - VLBG-Z: Unit of Measure - Each
117
RUD Uni-Directional Variable Length Swivel Lifting Rings Grade 100 - VWBG-V: Unit of Measure - Each
A (mm)
C (mm)
F (mm)
8
29
12
VWBG-V-0.3 M8
450
8
29
15
VWBG-V-O.5 M10
13.5
VLBS-1.5
165472
2500
45
48
13.5
VLBS-2.5
165050
4000
51
52
16.5
VLBS-4
165051
6700
67
73
22.5
VLBS-6.7
165052
10000
67
71
26.5
VLBS-10
165053
16000 100 105 26.5
VLBS - 16
F (mm)
40
E (mm)
38
C (mm)
1500
WLL (kg)
165049
164384
RUD Part No.
WLL (kg)
300
RUD Part No.
ORDER CODE
164407 164378 164379
600
10
35
21
VWBG-V-0.6 M12
164381
1300
10
35
30
VWBG-V-1.3 M16
164408
2000
13
35
33
VWBG-V-2.0 M20
3500
18
40
40
VWBG-V-3.5 M24
164409
5000
22
50
50
VWBG-V-5.0 M30
RUD Heavy-duty Uni-Directional Swivel Lifting Rings Grade 100 - VWBG: Unit of Measure - Each
RUD Weld-On Load Rings with Spring: Unit of Measure - Each
VLBS-1.5 with spring
165474
2500
45
48
13.5
VLBS-2.5 with spring
165475
4000
51
52
16.5
VLBS-4 with spring
165476
6700
67
73
22.5
VLBS-6.7 with spring
165477 10000
67
71
26.5
VLBS-10 with spring
118
RUD Part No.
13.5
F (mm)
RUD Part No.
40
C (mm)
F (mm)
38
A (mm)
E (mm)
1500
WLL (kg)
C (mm)
165473
• 8 - 40 tonne • Designed for loads that need to be turned or rotated • Will rotate 360° under load • Thread size M36 - M90 • Oversized load rings ORDER CODE
WLL (kg)
• With captive position holding spring ORDER CODE
05 - HARDWARE
• 1.5 to 16 tonne • Multi-directional loading • Weld-on design • Forged alloy steel load ring with captive position holding spring ‡5DWHGFDSDFLW\FDQEHLQFUHDVHGLQVSHFL¿F lashing applications • Available with and without internal position holding springs
• 0.3 - 5 tonne • Designed for loads that need to be turned or rotated • Will rotate 360° under load • Thread size M8 - M30 • Oversized load rings • Longer bolts available for all sizes ORDER CODE
RUD Weld-On Load Rings - Grade 100: Unit of Measure - Each
164385
8000
22
50
54
VWBG 8 M36
164386 12000
26
65
63
VWBG 12 M42
164410 13000
26
65
68
VWBG 13 M48
164411 16000
32
70
84
VWBG 16 M56
164412 16000
32
70
94
VWBG 16 M64
164413 40000
46
90
135
VWBG 40 M90
1300 722 999
RUD Metric Course Eyenut - Grade 80 - RM: Unit of Measure - Each
RUD Bolt-On Eye Plates - Grade 80 - RBG/VRBG: Unit of Measure - Each
RM-M6 RM-M8 RM-M10 RM-M12 RM-M14 RM-M16 RM-M20 RM-M24 RM-M30 RM-M36 RM-M42 RM-M48
164426
3200
48
178
M16 x 50
RBG - 3
164427
10000
65
194
M20 x 70 VRBG - 10
164428
16000
90
270
M30 x 90 VRBG - 16
RUD Weld-On Swivelling Eye Connection - WPP-B: Unit of Measure - Each ORDER CODE
WLL (kg)
A (mm)
B (mm)
C (mm)
D (mm)
E (mm)
G (mm)
RUD Part No.
• Non swivelling versions available on request
121900 121024 121901 121902 121903 121904
630 1500 2500 4000 5000 8000
9 11 13 16 21 24
65 65 74 95 130 140
35 35 40 45 60 65
40 46 61 80 95 100
105 115 135 172 223 242
40 50 61 77 93 102
WPP-B 0.63t WPP-B 1.5t WPP-B 2.5t WPP-B 4t WPP-B 5t WPP-B 8t
RUD Weld-On Swivelling Universal Connection - WPP-S: Unit of Measure - Each
ORDER CODE
WLL (kg)
A (mm)
B (mm)
C (mm)
D (mm)
E (mm)
F (mm)
RUD Part No.
• Will rotate 360° under load • Complete with welding instructions • Fixed welded versions also available
121905 121906 121907 121908 121909 121910
630 1500 2500 4000 5000 8000
13 20 28 36 37 49
75 97 126 150 174 208
18 25 30 35 40 48
40 46 61 80 95 100
115 147 187 227 267 310
40 50 61 77 93 102
WPP-S 0.63t WPP-S 1.5t WPP-S 2.5t WPP-S 4t WPP-S 5t WPP-S 8t
WWW.BULLIVANTS.COM
119
05 - HARDWARE
RUD Part No.
25 25 25 30 35 35 40 50 60 90 90 90
RUD Part No.
D (mm)
11 11 11 13 15 15 17 21 26 43 43 43
Bolt
C (mm)
35 35 35 41 48 48 55 70 85 130 130 130
L (mm)
A (mm)
100 200 250 400 750 800 1500 2000 3000 4000 6000 8000
D (mm)
WLL F2 (kg)
400 800 1000 1600 3000 3200 6000 8000 12000 16000 24000 32000
WLL (kg)
WLL F1 (kg)
164414 164415 164416 164417 164418 164419 164420 164421 164422 164423 164424 164425
• 3 to 80 tonne • Multi-directional loading • Bolt-On design • Load ring manufactured from Grade 80 material ‡5LQJIROGVÀDW ‡5DWHGFDSDFLW\FDQEHLQFUHDVHGLQVSHFL¿F lashing applications ORDER CODE
ORDER CODE
• Can be used for both axial and angular loading • Metric (coarse) threads • Rated for use in both single-part and multi-part lifts
ORDER CODE
WLL (kg)
A (mm)
B (mm)
C (mm)
D (mm)
E (mm)
F (mm)
G (mm)
M (mm)
SW (mm)
RUD Part No.
RUD PP-B Bolt-On Swivelling: Unit of Measure - Each
164429
630
9
65
35
40
105
18
41
12
36
PP-B M12
164430
1500
11
65
35
46
115
24
50
16
41
PP-B M16
164431
2500
13
75
40
61
135
30
61
20
55
PP-B M20
164432
4000
16
95
45
78
172
36
78
24
70
PP-B M24
164433
5000
21
130
60
95
223
45
93
30
85
PP-B M30
164434
8000
24
140
65
100 242
54
102
36
90
PP-B M36
RUD PP-S Bolt-On Swivel Universal Connection - Metric: Unit of Measure - Each
ORDER CODE
WLL (kg)
A (mm)
B (mm)
C (mm)
D (mm)
E (mm)
F (mm)
G (mm)
M (mm)
SW (mm)
RUD Part No.
164435
630
3
75
18
40
116
18
41
12
36
PP-S M12
164436
1500
20
9
25
46
147
25
50
16
41
PP-S M16
164437
2500
28
126
30
61
187
30
61
20
55
PP-SM20
164438
4000
36
150
35
78
227
36
77
24
70
PP-S M24
164439
5000
37
174
40
95
267
45
93
30
85
PP-S M30
164440
8000
49
208
48
100 310
54
102
36
90
PP-S M36
RUD ABA Weld-On Lifting Point: Unit of Measure - Each
C (mm)
D (mm)
E (mm)
F (mm)
30
16
100
35
16
57
165479
3200
41
23
137
50
21
80
59
1.1
ABA 3.2t
165480
5000
51
27
172
60
27.5
99
71.5
2.3
ABA 5t
165481 10000
70
38
228
80
35
130
95
5.3
ABA 10t
165483 20000
90
52
272
115
40
175
135 10.7
ABA 20t
165484 31500 108
64
320
130
50
204
154 18.3 ABA 31.5t
120
41.5 0.44
RUD Part No.
B (mm)
1600
Weight (kg)
A (mm)
165478
T (mm)
WLL (kg)
• Manufactured in using high tensile CrNiMo - steel • 100% Electro-magnetic crack detection tested • Complies with DIN 5691 and EN 1677 • 4:1 safety factor on WLL • Temperature Range -40°C to 100°C no reduction in WLL • Full working load in all directions • Patented wear markings on the inside and on the outside ORDER CODE
05 - HARDWARE
• New generation bolt-on lifting system • Quick and easy to mount • Double ball-bearings provide 360° rotation under load • 4:1 safety factor on WLL
ABA 1.6t
1300 722 999
Gunnebo ELP Eye Lifting Point Grade 80: Unit of Measure - Each
ORDER CODE
WLL (tonnes)
B (mm)
D (mm)
G (mm)
H (mm)
L (mm)
M (mm)
Weight (kg)
Gunnebo Part No.
• Suitable for 1 legged slings ‡(\HZLWKÀDWWHQHGVHFWLRQIRUXVHZLWK%HUJORN • Forged in Grade 80 material that permits higher WLL than conventional DIN 580 eyebolts. ‡0DJQDÀX[FUDFNWHVWHG
164279
1.0**
72
16
42
55
24
M16
0.4
ELP-M16-8
165028
1.5 **
72
16
42
57
30
M20
0.5
ELP-M20-8
164292
2.0 **
88
19
48
70
36
M24
0.9
ELP-M24-8
164297
3.0 **
106
22
60
84
45
M30
1.4
ELP-M30-8
165029
4.0 **
127
26
72
100
54
M36
2.3
ELP-M36-8
05 - HARDWARE
** In case of 1-leg application where loading is limited to straight loading in the direction of thread (no bending force) it is possible to use ELP with four times higher WLL Note: Threaded depths need to be at least 1xM for steel, 1.25 x M for cast iron and 2 x M for aluminium alloy.
Gunnebo RLP Rotating Lifting Point Grade 10: Unit of Measure - Each
ORDER CODE
WLL (all directions) tonnes
WLL (straight lift) tonnes
Bolt Size (mm)
B (mm)
D (mm)
G (mm)
H (mm)
L (mm)
Weight (kg)
Gunnebo Part No.
Suitable for applications where a conventional lifting point would not be fully adequate. Intended to be used as a Lifting Point, Lashing Point or Towing attachment. • Dismountable open D-ring. Enables assembly of roundsling, master link, link or hook directly onto the RLP. • Hexagon-headed screw for easy assembly/disassembly by means of ordinary wrench. • Forged in Grade 10 material permits higher WLL than Grade 8 and DIN 580 eyebolts. • For lifting with single or multi-leg slings. • Safety factor 4:1. • RLP can rotate 360° and articulate 180°. • Longer bolt can be supplied on request.
164346**
0.3
0.6
M8
42
12
35
60
15
0.3
RLP M8-10
164349**
0.5
1.0
M10
42
12
34
60
20
0.3
RLP M10-10
164350**
0.75
1.5
M12
57
19
46
85
19
0.9
RLP M12-10
164352**
1.5
3.0
M16
57
19
44
85
24
0.9
RLP M16-10
164354**
2.5
5.0
M20
83
28
56
111
32
2.8
RLP M20-10
164356
3.5
7.0
M24
83
28
53
111
37
2.8
RLP M24-10
165031
6.0
12.0 M30 114
34
69
144
49
7
RLP M30-10
165032
8.0
14.0 M36 114
34
65
144
61
7.3
RLP M36-10
165033
14.0
16.0 M42 149
40
90
185
65
14
RLP M42-10
165034
16.0
20.0 M48 149
40
86
185
75
14.9 RLP M48-10
** Available in UNC thread; 5/16”, 3/8”, 7/16”, 5/8”, 3/4”
WWW.BULLIVANTS.COM
121
Gunnebo SLP Screw-on Lifting Points Grade 80: Unit of Measure - Each
WLL (tonnes)
B (mm)
C (mm)
D (mm)
H (mm)
L (mm)
R (mm)
Weight (kg)
Gunnebo Part No.
165025
1.0
50
72
14
98
55
M14 139
24
0.9
SLP-1T
165026
3.0
58
84
17
114
50
M16 144
29
1.4
SLP-3T
164374
5.0
64
116
22
160
74
M20 203
33
2.9
SLP-5T
T (mm)
M (mm)
ORDER CODE
• For use in applications where welding is not possible. • Forged D-ring and housing in Grade 80 material. ‡'LVPRXQWDEOHÀDWGHVLJQ ‡7HVWORDGHGDQG0DJQDÀX[FUDFNWHVWHG
Gunnebo Weldable Lifting Point type WLP without Spring Grade 8: Unit of Measure - Each
ORDER CODE
WLL (tonnes)
B (mm)
D (mm)
G (mm)
L (mm)
R (mm)
T (mm)
Weight (kg)
Gunnebo Part No.
164174
1.0
50
14
27
53
24
95
0.5
WLP-1T
164175
3.0
58
17
34
48
29
97
0.9
WLP-3T
164230
5.0
64
22
41
73
33
135
1.7
WLP-5T
165002
8.0
60
25
50
68
35
145
24
WLP-8T*
164232
15.0
88
34
65
92
40
190
5.8
WLP-15T*
* Painted red, without spring.
WLL (tonnes)
B (mm)
C (mm)
G (mm)
H (mm)
K (mm)
L (mm)
S(mm)
Weight (kg)
Gunnebo Part No.
Gunnebo Universal Weld-on Hook UKN: Unit of Measure - Each ORDER CODE
05 - HARDWARE
Weld-on lifting point for towing, lashing and lifting applications. • Forged D-ring and housing in Grade 80 material. ‡7HVWORDGDQG0DJQDÀX[FUDFNWHVWHG • Flat design • Can be supplied with or without spring for stay up function.
121307
1.0
20
72
17
25
25
95
6
0.6
UKN-1***
121138
2.0
26
86
20
30
30
114
8
1.0
UKN-2***
121139
3.0
30
105
23
32
35
132
10
1.3
UKN-3
121309
4.0
29
114
29
38
42
140
11
1.9
UKN-4
121310
5.0
34
131
30
47
45
165
12
2.9
UKN-5
121312
8.0
34
133
40
51
50
172
13
3.5
UKN-8
121313
10.0
47
170
43
58
55
220
14
6.4
UKN-10
121928
15.0
53
188
50
67
60
240
15
8.8
UKN-15
If welding on to an excavator or its accessories we recommend that the working load limit is reduced, where necessary, to meet any appropriate legislative requirements. Please Bullivants for further information. ***Welding plate slightly curved
122
1300 722 999
PWB Grade 80 Weld-On Hook: Unit of Measure - Each
WLL (tonnes)
P (mm)
L (mm)
T (mm)
H (mm)
W (mm)
A (mm)
M (mm)
Mass (kg)
PWB Part No..
122555
1
18
70
18
27
95
7
4
0.6
40915Y
122556
2
25
85
20
30
115
8
5
1
40916Y
122557
3
28
107
23
30
133
9
6
1.4
40919Y
122558
4
28
114
30
38
142
10
7
2
40920Y
122559
5
30
135
31
47
167
12
7
3
40917Y
122560
8
32
137
39
52
176
12
8
3.8
40921Y
122561
10
44
170
42
56
222
13
8
6.3
40918Y
*Distributed by PWB Anchor
05 - HARDWARE
ORDER CODE
)RUXVHDVDVSUHDGHUEHDPOLIWLQJDWWDFKPHQWRUIRU¿[HGDQFKRUSRLQW$OORZV for axial loading and positive locking with the safety latch. Welding instructions supplied with each unit.
PWB Grade 80 Weld-On Lifting Point: Unit of Measure - Each ORDER CODE
WLL (tonnes)
W (mm)
K (mm)
R (mm)
L (mm)
Mass (kg)
PWB Part No..
‡'HVLJQHGIRU¿[HGDQFKRURUOLIWLQJSRLQW
122562
1
50
38
24
105
0.5
42285
122563
3
58
48
29
112
0.8
42286
122564
5
64
61
33
154
1.8
42287
122565
8
61
73
34
169
2.6
42288
122566
10
75
73
41
191
3.1
42289
122567
15
91
93
50
234
6.5
42290
*Distributed by PWB Anchor
PWB Grade 80 Bolt-On Tie-Down Point: Unit of Measure - Each
ORDER CODE
WLL (tonnes)
A (mm)
B (mm)
R (mm)
M (mm)
K (mm)
L (mm)
Mass (kg)
PWB Part No..
‡'HVLJQHGIRU¿[HGDQFKRURUWLHGRZQSRLQW • Supplied without bolt assembly.
122568
1
50
72
24
14
98
139
0.8
42277
122569
3
58
84
29
16
114
144
1.1
42278
122570
5
64
116
33
20
160
203
2.5
42279
WWW.BULLIVANTS.COM
*Distributed by PWB Anchor
123
Black Metric Eyenuts: Unit of Measure - Each
ORDER CODE
Size (mm)
Thread Pitch
Net Weight (kg)
164314
M10
1.5
0.12
ORDER CODE
Size (in.)
Thread Pitch
Net Weight (kg)
BSW Thread Eyenut: Unit of Measure - Each
164316
M12
1.75
0.18
164320
5/8
11
0.3
164321
M16
2
0.3
164328
1
8
1.20
164207
M20
2.5
0.57
3/8” to 3” available
Other sizes available.
Net Weight (kg)
0.1
164317
M12
1.75
0.15
164206
M16
2
0.24
Weight (kg)
Thread Pitch
1.5
Thread Pitch
Size (mm)
M10
Nom. Size (mm)
ORDER CODE
164315
164173
24
3
1.28
20mm & 45mm also available Concrete Lifting Eye: Unit of Measure - Each
Other sizes available.
Size (in.)
Thread Pitch
Net Weight (kg)
ORDER CODE
WLL (tonnes)
UNC Thread Eyenut: Unit of Measure - Each
ORDER CODE
05 - HARDWARE
Not approved for lifting applications.
ORDER CODE
Forged Lifting Loop: Unit of Measure - Each
Zinc Metric Eyenuts: Unit of Measure - Each
633121
1.3
164319
1/2”
13
0.18
633122
3/8” to 3” available
124
2.5
633131
5
1300 722 999
WELD ON LIFTING POINT Bullivants BlueLink Weld On Lifting Point: Unit of Measure - Each Features: • Australian made • Forged D-ring and housing in Grade 100 material • Flat design ‡7HVWORDGDQGPDJQDÀX[WHVWORDGHG • Multi directional loading
05 - HARDWARE
‡5DWHGFDSDFLW\FDQEHLQFUHDVHGLQVSHFL¿F lashing applications
ORDER CODE
Working Load Limits (in tonnes) for symmetrical loading
2, 3 or 4 Point Single Point WLL (tonne)
Maximum Included Angle 60°
90°
120°
165451
2.0
3.4
2.8
2.0
164453
4.0
6.9
5.6
4.0
165452
6.7
11.6
9.5
6.7
WARNING - NEVER EXCEED THE WORKING LOAD LIMIT (WLL).
1300 722 999 www.bullivants.com
MANUFACTURED IN AUSTRALIA USING ONLY HEAT CERTIFIED AUSTRALIAN STEEL.
125
Rigging Screws & Turnbuckles Types of Turnbuckles and Rigging Screws Grade L Rigging Screws & Turnbuckles must comply with AS2319. In accordance with AS2319 turnbuckles and rigging screws VKRXOGEHPDUNHGZLWKPDQXIDFWXUHUVLGHQWL¿FDWLRQQRPLQDOVL]HZKHUHWKHTXDOLW\RIWKHJUDGHLVRWKHUWKDQ/WKHTXDOLW\RI JUDGHVKDOOEHPDUNHGRQWKHHQG¿WWLQJ://LQWRQQHVLGHQWL¿FDWLRQPDUNLQJWRFRUUHODWHWKHULJJLQJVFUHZRUWXUQEXFNOHWRWKH WHVWFHUWL¿FDWH Commercial Grade Turnbuckles are not to be used for lifting purposes. Commercial Grade Turnbuckles are not made to any standard. Usually used for tensioning or ing light loads. Care & Use • Ensure the WLL suits the application. • Markings can be clearly read. ‡7KHERG\DQG¿WWLQJRIWKHULJJLQJVFUHZRUWXUQEXFNOHLVQRWGLVWRUWHG • Conduct a visual inspection for nicks, gouges, cracks and corrosion. • Conduct a visual inspection for damaged screw threads. • Care should be taken to ensure that rigging screws and turnbuckles are not excessively tightened. Turnbuckles and rigging screws should be inspected periodically by a competent person as per AS2319 Rigging Screws are used to provide a means for length adjustment and for tensioning. They are also used with guys for masts, towers and other structures and engineering applications. 5LJJLQJ6FUHZVJHQHUDOO\KDYHHORQJDWHGH\HVRUFOHYLVHQG¿WWLQJVIRUFRQQHFWLRQWRVKDFNOHVZLUHURSHDVVHPEOLHVSDGH\HV and the like. An observation hole is provided at the inner end of the thread, at each end of the body, which permits visual observation of the PD[LPXPSHUPLWWHGH[WHQGHGSRVLWLRQRIWKHHQG¿WWLQJ Additionally, rigging screws have the innate facility for continuing lubrication as the enclosed section of the body provides a suitable reservoir for grease or other lubrication. Hence, they have an advantage in relative corrosive applications such as ship’s rigging and permanent outdoor guys. Rigging screws are not designed for continuous adjustment under rated load conditions. Turnbuckles Turnbuckles have the same applications as rigging screws, but generally have smaller size range and shorter adjustment. 7KHPDLQEHQH¿WRIDWXUQEXFNOHLVWKDWLWPD\KDYHDJUHDWHUDELOLW\WREHWLJKWHQHGXQGHUORDG$OVRWKHUHPD\EHDZLGHUVFRSH for providing means for locking while in service. Turnbuckles are not designed for continuous adjustment under rated load.
Grade L Rigging Screws ORDER CODE
Size (mm)
A (mm) Closed
A (mm) Open
C (mm)
D (mm)
E (mm)
F (mm)
K (mm)
WLL (tonnes)
Weight (kg)
Grade L Rigging Screw - Clevis & Clevis (Jaw & Jaw): Unit of Measure - Each
160063
12
340
525
15
35
8.5
230
10
0.5
0.97
160068
16
360
535
20
40
9
230
12
0.75
1.36
160070
20
390
555
22
46
10.5
230
16
1.25
2.35
160075
24
555
740
30
58
13
360
20
2.5
4.2
Other sizes available.
Size (mm)
A (mm) Closed
A (mm) Open
E (mm)
F (mm)
G (mm)
H (mm)
J (mm)
WLL (tonnes)
Weight (kg)
Grade L Rigging Screw - Eye & Eye: Unit of Measure - Each ORDER CODE
05 - HARDWARE
Rigging Screws
160046
16
350
525
9
230
17
36
12
0.75
1.09
160047
20
380
545
10.5
230
21
42
12
1.25
1.72
160072
24
540
725
13
360
25
51
17
2.5
3.2
Other sizes available.
126
1300 722 999
Grade P Rigging Screws ORDER CODE
Size (mm)
A (mm) Closed
A (mm) Open
C (mm)
D (mm)
E (mm)
F (mm)
K (mm)
WLL (tonnes)
Weight (kg)
Grade P Rigging Screws - Clevis & Clevis (Jaw & Jaw): Unit of Measure - Each
160064
12
340
525
15
35
8.5
230
10
1.00
0.97
160069
16
360
535
20
40
9.0
230
12
1.60
1.36
160071
20
390
555
22
46
10.5
230
16
2.50
2.35
165005
24
555
740
30
58
13.0
360
20
4.00
5.20
160079
M33
628
904
38
75
14.0
380
24
8.00 11.20
Other sizes available.
Size (mm)
A (mm) Closed
A (mm) Open
E (mm)
F (mm)
G (mm)
H (mm)
J (mm)
WLL (tonnes)
Weight (kg)
160675
16
350
525
9.0
230
17
36
12
1.60
1.09
160048
20
380
545
10.5
230
21
42
12
2.50
1.72
165006
24
540
725
13.0
360
25
51
17
4.00
3.20
160785
M33
660
936
14.0
380
33
70
24
8.00
9.11
05 - HARDWARE
ORDER CODE
Grade P Rigging Screws - Eye & Eye: Unit of Measure - Each
Other sizes available.
Grade L Turnbuckles ORDER CODE
Size (mm)
A (mm) Closed
A (mm) Open
B (mm)
C (mm)
D (mm)
F (mm)
K (mm)
WLL (tonnes)
Weight (kg)
Grade L Turnbuckles - Clevis & Clevis (Jaw & Jaw): Unit of Measure - Each
160875
10
240
350
30
14
30
150.0
10
0.30
0.50
160099
12
335
470
36
15
35
190.5
10
0.50
0.84
160053
16
355
490
45
20
40
204.0
12
0.75
1.53
160114
20
440
520
46
22
46
216.5
16
1.25
2.79
160123
24
450
585
59
30
58
232.0
20
2.50
4.57
Other sizes available.
ORDER CODE
Size (mm)
A (mm) Closed
A (mm) Open
F (mm)
G (mm)
H (mm)
J (mm)
WLL (tonnes)
Weight (kg)
Grade L Turnbuckles - Eye & Eye: Unit of Measure - Each
160093
10
230
335
150.0
11
21
7
0.30
0.35
160094
12
330
470
190.5
15
30
9
0.50
0.67
160102
16
350
485
204.0
17
36
12
0.75
1.55
160111
20
385
515
216.5
21
42
14
1.25
2.16
160119
24
440
570
232.0
25
51
17
2.50
3.20
Other sizes available.
WWW.BULLIVANTS.COM
127
A (mm) Closed
A (mm) Open
B (mm)
C (mm)
D (mm)
F (mm)
G (mm)
H (mm)
J (mm)
K (mm)
10
235
340
30
14
30
150.0
11
21
7
10
0.30 0.30
160097
12
330
470
36
15
35
190.5
15
30
9
10
0.50 0.50
165012
16
355
490
45
20
40
204.0
17
36
12
12
0.75 0.75
160055
20
390
520
55
22
46
215.5
21
42
14
16
1.25 1.25
160121
24
445
580
59
30
58
232.0
25
51
17
20
2.50 2.50
Weight (kg)
Size (mm)
165011
WLL (tonnes)
ORDER CODE
Grade L Turnbuckles - Clevis (Jaw) & Eye: Unit of Measure - Each
Other sizes available.
Grade P Turnbuckles ORDER CODE
Size (mm)
A (mm) Closed
A (mm) Open
B (mm)
C (mm)
D (mm)
F (mm)
K (mm)
WLL (tonnes)
Weight (kg)
160050
12
335
470
36
15
35
190.5
10
1.00
0.84
160105
16
355
490
45
20
40
204.0
12
1.60
1.60
160115
20
440
520
46
22
46
216.5
16
2.50
2.80
160124
24
450
585
59
30
58
232.0
20
4.00
4.57
160876
M33
630
780
78
38
76
252.0
24
8.00
8.00
Other sizes available.
ORDER CODE
Size (mm)
A (mm) Closed
A (mm) Open
F (mm)
G (mm)
H (mm)
J (mm)
WLL (tonnes)
Weight (kg)
Grade P Turnbuckles - Eye & Eye: Unit of Measure - Each
160103
16
350
485
204.0
17
36
12
1.60
1.50
160112
20
385
515
216.5
21
42
14
2.50
2.16
160120
24
440
570
232.0
25
51
17
4.00
3.50
160877
M33
656
806
252.0
33
70
24
8.00
6.50
Other sizes available.
A (mm) Open
B (mm)
C (mm)
D (mm)
F (mm)
G (mm)
H (mm)
J (mm)
K (mm)
12
330
470
36
15
35
190.5
15
30
9
10
1.00 0.70
160113
20
390
520
55
22
46
215.5
21
42
14
16
2.50 2.50
160122
24
445
580
59
30
58
232.0
25
51
17
20
4.00 4.00
643
793
78
38
76
252.0
33
70
24
24
8.00 7.50
160878 M33
Weight (kg)
A (mm) Closed
160098
WLL (tonnes)
Size (mm)
Grade P Turnbuckles - Clevis (Jaw) & Eye: Unit of Measure - Each ORDER CODE
05 - HARDWARE
Grade P Turnbuckles - Clevis & Clevis (Jaw & Jaw): Unit of Measure - Each
Other sizes available.
128
1300 722 999
Weight (kg)
ORDER CODE
Size (mm)
Style
Weight (kg)
Not approved for lifting applications.
Style
Not approved for lifting applications.
Size (mm)
Commercial Grade Hook & Eye Turnbuckles: Unit of Measure - Each
ORDER CODE
Commercial Grade Eye & Eye Turnbuckles: Unit of Measure - Each
160153
5
Eye & Eye
0.02
160158
5
Hook & Eye
0.02
160154
6
Eye & Eye
0.16
160144
6
Hook & Eye
0.16
160148
8
Eye & Eye
0.24
160145
8
Hook & Eye
0.24
160149
10
Eye & Eye
0.36
160146
10
Hook & Eye
0.36
160150
12
Eye & Eye
0.64
160147
12
Hook & Eye
0.64
160151
16
Eye & Eye
1.44
160152
16
Hook & Eye
1.44
160155
20
Eye & Eye
2.55
160156
20
Hook & Eye
2.55
160160
22
Eye & Eye
3.53
160161
22
Hook & Eye
3.53
160163
25
Eye & Eye
4.34
160157
25
Hook & Eye
4.34
05 - HARDWARE
Commercial Grade Turnbuckles
6XSHUEXFNOHV86)HG6SHFLÀFDWLRQV))7% • Hot dip galvanised steel. ‡(QG¿WWLQJVDUHTXHQFKHGDQGWHPSHUHGERGLHVKHDWWUHDWHGE\QRUPDOL]LQJ • Turnbuckles recommended for straight on in-line pull only. ‡0HHWVWKHSHUIRUPDQFHUHTXLUHPHQWVRI)HGHUDO6SHFL¿FDWLRQV))7% Type 1, Form 1 - Class 7, except those provisions required by the contractor. • Proof load is 2.5 times the WLL. Ultimate load is 5 times the WLL.
ORDER CODE
Thread Dia. & Take up (in.)
Thread Dia. & Take up (mm)
WLL (tonnes)
Style
A (mm)
B (mm)
E (mm)
G (mm)
J (mm)
K (mm)
M (mm)
N (mm)
BB (mm)
Weight (kg)
Superbuckles - Clevis & Clevis (Jaw & Jaw): Unit of Measure - Each
165007
3/8 x 6
9.53 x 152
0.54
Jaw & Jaw
9.65
13.7
54
22.1
410
258
441
289
152
0.37
160051
1/2 x 12
12.7 x 305
1.00
Jaw & Jaw 12.70
16.5
70
26.9
775
445
813
483
305
1.09
160052
5/8 x 12
15.9 x 305
1.59
Jaw & Jaw 16.00
20.1
89
33.3
814
478
867
530
305
1.77
160054
3/4 x 12
19.1 x 305
2.36
Jaw & Jaw 19.10
23.9
106
38.1
851
508
917
574
305
2.98
160109
3/4 x 18
19.1 x 457
2.36
Jaw & Jaw 19.10
23.9
106
38.1
1156
660
1222
726
457
3.64
160057
7/8 x 12
22.2 x 305
3.27
Jaw & Jaw 22.40
28.7
123
44.5
892
543
967
618
305
3.71
160128
1 x 12
25.4 x 305
4.54
Jaw & Jaw 25.40
34.0
140
52.5
933
577
1018
662
305
5.53
160135
1-1/4 x 18
31.8 x 457
6.89
Jaw & Jaw 31.80
44.5
183
71.5
1317
796
1423
903
457
11.2
160143
1-1/2 x 18
38.1 x 457
9.71
Jaw & Jaw 38.10
52.3
200
71.5
1359
826
1486
953
457
16.7
160139
2 x 24
51.0 x 610
16.80
Jaw & Jaw 51.00
66.5
301
93.5
1766
1157
1949 1339
610
42.8
160140
2-1/2 x 24
63.5 x 610
27.20
Jaw & Jaw
76.5
344
113.0 1854 1244 2087 1478
610
75
63.5
Other sizes available.
WWW.BULLIVANTS.COM
129
ORDER CODE
Thread Dia. & Take up (in.)
Thread Dia. & Take up (mm)
WLL (tonnes)
Style
A (mm)
J (mm)
K (mm)
M (mm)
N (mm)
R (mm)
S (mm)
X Closed (mm)
BB (mm)
Weight (kg)
Superbuckles - Eye & Eye: Unit of Measure - Each
160108
3/4 x 12
19.1 x 305
2.3
Eye & Eye
19.1
911
568
943
600
53
25.4
119
304
2.49
160056
7/8 x 12
22.2 x 305
3.27
Eye & Eye
22.4
942
592
980
630
60.4
31.7
130
304
3.27
160130
1-1/4 x 12
31.8 x 305
6.89
Eye & Eye
31.8
1087
719
1145
776
90.5
46
196
304
8.62
Other sizes available.
E Closed (mm)
G (mm)
J Open (mm)
K Closed (mm)
M Open (mm)
N Closed (mm)
Jaw & Eye
16.0 20.1
89
33.3
838
501
877
541
160058
1-3/4 x 18
44.5 x 457
12.7
Jaw & Eye
44.5
66
239
86
1407
949
165010
1-3/4 x 24
44.5 x 610
12.7
Jaw & Eye
44.5
66
239
86
1711
1102
99
304
1.64
1518 1061
117
60.4
254
457
24.4
1823 1214
117
60.4
254
609
27.5
S (mm)
44.4 22.3
R (mm)
Weight (kg)
Style
1.59
BB (mm)
WLL (tonnes)
15.9 x 305
X Closed (mm)
Thread Dia. & Take up (mm)
5/8 x 12
B (mm)
Thread Dia. & Take up (in.)
165009
A (mm)
ORDER CODE
05 - HARDWARE
Superbuckles - Clevis (Jaw) & Eye: Unit of Measure - Each
Other sizes available
130
1300 722 999
Wire Rope Terminations Wedge Sockets Wedge - type sockets are used in lifting, pulling, tensioning and staying systems as a simple mechanical connection to steel wire ropes, especially where steel wire ropes may require shortening. One end of the wedge type socket is able to clamp a rope with a ZHGJLQJDFWLRQDQGWKHRWKHUHQGLVDEOHWRFRQQHFWWRDQRWKHU¿WWLQJRUDQFKRUDJH The wedge - type socket is designed for use on wire ropes up to and including 1770 grade wire with a wire rope core, however higher grade wire rope may be used, provided it meets the intent of this Standard. Metal or Spelter Sockets - Open and Closed The load is transferred between the rope and the socket forging or casting by means of adhesion between the rope wires and the metal or resin used in the socket bowl and subsequent wedging action provided by the bond between the rope’s wires and the metal or resin in the socket. Care should be taken to follow the correct socketing procedure. Properly applied poured socket attachments will withstand the actual breaking force of the wire rope.
Sockets
(in.)
160720
6
1/4
0.24
160721
8
5-16
0.51
160722
9-10
3/8
0.59
160723
11-12
7/16
0.94
160724
13
1/2
0.94
160725
14
9/16
2.12
160418
16
5/8
2.05
160403
18-20
3/4
3.62
160406
22
7/8
5.23
160726
24-26
1
8.07
160727
28
1-1/8
11.5
160728
32
1-1/4
16.1
160729
34-36
1-3/8
19.8
160730
38-40
1-1/2
26.5
160731
44
1-3/4
40.3
160732
48-52
2
66
WWW.BULLIVANTS.COM
Rope Size*
Weight Each (kg)
(mm)
• Forged from special bar quality carbon steel, suitable for cold forming. ‡6ZDJH6RFNHWWHUPLQDWLRQVKDYHDQHI¿FLHQF\UDWLQJRI 100% based on the catalogue strength of wire rope. • Hardness controlled by spheroidize annealing. ‡6WDPSIRULGHQWL¿FDWLRQDIWHUVZDJLQJZLWKRXWFRQFHUQIRU fractures (as per directions in National Swaging Brochure). • U.S. Patent 5,152,630 and foreign equivalents. ORDER CODE
Rope Size*
Weight Each (kg)
ORDER CODE
• Forged from special bar quality carbon steel, suitable for cold forming. ‡6ZDJH6RFNHWWHUPLQDWLRQVKDYHDQHI¿FLHQF\UDWLQJRI 100% based on the catalogue strength of wire rope. • Hardness controlled by spheroidize annealing. ‡6WDPSIRULGHQWL¿FDWLRQDIWHUVZDJLQJZLWKRXWFRQFHUQIRU fractures (as per directions in National Swaging Brochure). • U.S. Patent 5,152,630 and foreign equivalents.
(mm)
(in.)
160733
6
1/4
0.15
160734
8
5/16
0.34
160735
9-10
3/8
0.33
160736
11-12
7/16
0.64
160737
13
1/2
0.64
160738
14
9/16
1.32
160739
16
5/8
1.29
160740
18-20
3/4
2.27
160741
22
7/8
3.08
160742
24-26
1
4.72
160678
28
1-1/8
6.72
160743
32
1-1/4
9.78
160744
34-36
1-3/8
12.9
160398
38-40
1-1/2
17.3
160399
44
1-3/4
23.1
160677
48-52
2
40.5
131
05 - HARDWARE
Crosby S-501 Open Swage Sockets: Unit of Measure - Each Crosby S-502 Closed Swage Sockets: Unit of Measure - Each
Crosby G-416 Open Spelter Sockets: Unit of Measure - Each
Crosby G-417 Closed Speltor Sockets: Unit of Measure - Each
(mm)
(in.)
Structural Strand Dia.(mm)
Ultimate Load (t)
Weight Each (kg)
Ultimate Load (t)
ORDER CODE
(in.)
Structural Strand Dia. (mm)
Weight Each (kg)
(mm)
160745
6-7
1/4
-
4.50
0.50
160757
6-7
1/4
-
4.50
116
160746
8-10
5/16 - 3/8
-
12.0
0.59
160465
8 - 10
5/16 - 3/8
-
12.0
0.34
160478
11-13
7/16 - 1/2
-
20.0
1.02
160466
11 - 13
7/16 - 1/2
-
20.0
0.68
160480
14-16
9/16 - 5/8
12-13
27.0
1.63
160758
14 - 16
9/16 - 5/8
12-13
30.8
1.13
160747
18
3/4
14-16
43.0
2.64
160467
18
3/4
14-16
43.5
1.92
160487
20-22
7/8
18-19
55.0
4.38
160759
20 - 22
7/8
18-19
65.3
3.28
160748
24-26
1
20-22
78.0
7.03
160760
24 - 26
1
20-22
81.6
4.76
160492
28-30
1 - 1/8
24-26
92.0
9.75
160761
28 - 30
1 - 1/8
24-26
100
6.46
160495
32-35
1 - 1/4 - 1-3/8
28
136
14.1
160762
32 - 35
1 - 1/4 - 1 - 3/8
28
136
8.95
160749
38
1 - 1/2
30-32
170
21.4
160763
38
1 - 1/2
30-32
170
13.24
160750 *40 - 42
* 1 - 5/8
33-35
188
24.9
160764 †40 - 42
†1 - 5/8
33-35
188
16.32
160751 *44 - 48
*1 - 3/4 - 1-7/8
36-40
268
37.2
160765 †44 - 48 †1 - 3/4 - 1 - 7/8 36-40
268
25.96
160752 *50 - 54
*2 - 2 - 1/8
42-45
291
59
160766 †50 - 54
42-45
309
35.83
160753 *56 - 60 *2 - 1/4 - 2 - 3/8 46-48
360
76
160767 †56 - 60 †2 - 1/4 - 2 - 3/8 46-48
360
47.62
160754 * 64 - 67 *2 - 1/2 - 2-5/8
50-54
424
114
160768 †64 - 67 †2 - 1/2 - 2 - 5/8 50-54
424
63.50
160755 *70 - 73 *2 - 3/4 - 2 - 7/8 56-62
511
143
160769 †70 - 73 †2 - 3/4 - 2 - 7/8 56-62
549
99.79
160756 *75 - 80
563
172
160770 †75 - 80
656
125
ORDER CODE
05 - HARDWARE
• Forged Steel Sockets thru 38 mm, cast alloy steel • Forged Steel Sockets thru 38 mm, cast alloy steel 40mm - 102mm. 40mm - 100mm. ‡6SHOWHUVRFNHWWHUPLQDWLRQVKDYHDQHI¿FLHQF\UDWLQJ ‡6SHOWHUVRFNHWWHUPLQDWLRQVKDYHDQHI¿FLHQF\UDWLQJ of 100%, based on the catalogue strength of wire rope. of 100%, based on the catalogue strength of wire rope. Ratings are based on recommended use with 6 x 7, 6 x 19, Ratings are based on the recommended use with 6 x 7, or 6 x 37, IPS or XIP (EIP), XXIP (EEIP), RRL, FC, or IWRC 6 x 19 or 6 x 37, IPS or XIP (EIP) , XXIP (EEIP), RRL, wire rope. FC or IWRC wire rope.
132
Rope Dia.
*3 - 3 - 1/8
64-67
Rope Dia.
†2 - 2 - 1/8
†3 - 3 - 1/8
64-67
1300 722 999
ORDER CODE
160443
Wire Rope Dia.
(mm)
(in.)
9 - 10
3/8
160879 Self Colour
6-7
1/4
12
0.2
46812
160880 Self Colour
8
5/16
18
0.7
46813
160881 Self Colour
9-10
3/8
18
0.6
46814
160882 Self Colour 11-12
7/16
23
1.2
46818
160883 Self Colour
½
23
0.9
46819
160884 Self Colour 14-15
13
9/16
30
2.1
46820
160885 Self Colour
5/8
30
2.1
46821
160886 Self Colour 18-20
¾
36
3.8
46822
160887 Self Colour 22-23
7/8
40
5.4
46823
160387 Self Colour 24-25
1
46
8.8
46824
16
160888 Self Colour
28
1-1/8
52
12.6
46826
160889 Self Colour
32
1-1/4
59
17.2
46827
160890 Self Colour
36
1-3/8
65
20.8
46828
160891 Self Colour
38
1-1/2
72
26.5
46829
160892 Self Colour
45
1-3/4
78
40.3
43830
160893 Self Colour
50
2
91
66.4
46831
160894 Galvanised
6-7
1/4
12
0.2
46796
160895 Galvanised
8
5/16
18
0.7
46797
160896 Galvanised
9-10
3/8
18
0.6
46798
160897 Galvanised 11-12
7/16
23
1.2
46799
½
23
0.9
46800
160899 Galvanised 14-15
9/16
30
2.1
46801
160900 Galvanised
5/8
30
2.1
46802
160901 Galvanised 18-20
¾
36
3.8
46803
160902 Galvanised 22-23
7/8
40
5.4
46804
160898 Galvanised
13 16
160446
11 - 13
1/2
160449
14 - 16
5/8
160451
18 - 19
3/4
1
46
8.8
46805
160771
20 - 22
7/8
160904 Galvanised
28
1-1/8
52
12.6
46806
160463
24 - 26
1
160905 Galvanised
32
1-1/4
59
17.2
46807
160772
28
1-1/8
160906 Galvanised
36
1-3/8
65
20.8
46808
160773
30 - 32
1-1/4
160907 Galvanised
38
1-1/2
72
26.5
46809
160908 Galvanised
45
1-3/4
78
40.3
46810
160909 Galvanised
50
2
91
66.4
46811
WWW.BULLIVANTS.COM
160903 Galvanised 24-25
133
05 - HARDWARE
(in.)
PWB Part No.
(mm)
Net Weight (kg)
Rope Size
Max After Swage (mm)
*Distributed by PWB Anchor • Forged from special bar quality carbon steel with superior hardness controlled by spheroidize annealing. • When correctly assembled Swage socket terminations KDYHDQHI¿FLHQF\UDWLQJRIEDVHGRQWKHFDWDORJXH strength of wire rope. • Recommended for use with 6 x 19, 6 x 37 and IWRC wire rope and are approved for use with galvanized bridge rope. • All slings swaged with sockets shall be proof loaded in accordance with AS1666.1/2009 1275HFRPPHQGHGIRUXVHRQ¿EUHFRUHRIODQJOD\URSH
Finish
‡:HGJHVRFNHWWHUPLQDWLRQVKDYHDQHI¿FLHQF\UDWLQJRI 80% based on the catalogue strength of XXIP wire rope. • Crosby products meet or exceed all requirements of $60(%LQFOXGLQJLGHQWL¿FDWLRQGXFWLOLW\GHVLJQ factor, proof load and temperature requirements. Importantly, Crosby products meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26. ‡7\SH$SSURYDODQGFHUWL¿FDWLRQLQDFFRUGDQFHZLWK ABS 2006 Steel Vessel Rules 1-1-17.7, and ABS Guide IRU&HUWL¿FDWLRQRI&UDQHV • Individually magnetic particle inspected. • Pin diameter and jaw opening allows wedge and socket to be used in conjunction with closed swage and spelter sockets. • Secures the tail or “dead end” of the wire rope to the wedge, thus eliminates loss or “Punch out” of the wedge. • Eliminates the need for an extra piece of rope, and is easily installed. • The TERMINATOR™ wedge eliminates the potential breaking off of the tail due to fatigue. • The tail, which is secured by the base of the clip and the wedge, is left undeformed and available for reuse. • Utilises standard Crosby Red-U-Bolt® wire rope clip. • The 9-10mm thru 30-32mm standard S-421 wedge VRFNHWFDQEHUHWUR¿WWHGZLWKWKHQHZVW\OH7(50,1$725Œ wedge. • Available with Bolt, Nut, and Cotter Pin. • U.S. patent 5,553,360, Canada patent 2,217,004 and foreign equivalents.
PWB Forged Open Swage Socket, with Round Pin: Unit of Measure - Each
ORDER CODE
Crosby S-421T Terminator Wedge Sockets: Unit of Measure - Each
PWB Forged Closed Swage Wire Rope Socket (Self Colour): Unit of Measure - Each
(mm)
(in.)
Max After Swage (mm)
Net Weight (kg)
PWB Part No.
160910
6-7
1/4
12
0.2
46832
160911
8
5/16
18
0.3
46833
160912
9-10
3/8
18
0.3
46834
160913
11-12
7/16
23
0.7
46835
160914
13
1/2
23
0.6
46836
160915
14-15
9/16
30
1.4
46837
160916
16
5/8
30
1.3
46838
160917
18-20
3/4
36
2.2
46839
160394
22-23
7/8
39
3.1
46840
160918
24-25
1
46
4.8
46841
160919
28
1-1/8
52
6.7
46842
160920
32
1-1/4
58
10.1
46843
160921
36
1-3/8
65
12.9
46844
160922
38
1-1/2
71
16.9
46845
160923
45
1-3/4
78
24.3
46846
160924
50
2
90
40.5
46847
Rope Size
*Distributed by PWB Anchor
PWB Forged Closed Spelter Wire Rope Socket (Self Colour): Unit of Measure - Each • Forged from special bar quality carbon steel with superior hardness controlled by spheroidize annealing. ‡:KHQFRUUHFWO\DVVHPEOHG6ZDJHVRFNHWWHUPLQDWLRQVKDYHDQHI¿FLHQF\ rating of 100% based on the catalogue strength of wire rope. • Socket size 1/4” thru 3/4” use one groove, 7/8” thru 1-1/2” use 2 grooves • In accordance with AS1666.1/2009 all assembly slings with poured Spellter Sockets, shall be proof loaded
(mm)
(in.)
(mm)
(in.)
Net Weight (kg)
PWB Part No.
ORDER CODE
05 - HARDWARE
ORDER CODE
• Forged from special bar quality carbon steel with superior hardness controlled by spheroidize annealing. ‡:KHQFRUUHFWO\DVVHPEOHG6ZDJHVRFNHWWHUPLQDWLRQVKDYHDQHI¿FLHQF\ rating of 100% based on the catalogue strength of wire rope. • Recommended for use with 6 x 19, 6 x 37 and IWRC wire rope and are approved for use with galvanized bridge rope. • All slings swaged with sockets shall be proof loaded in accordance with AS1666.1/2009 1275HFRPPHQGHGIRUXVHRQ¿EUHFRUHRIODQJOD\URSH
160925
6-7
1/4
-
-
0.3
46770
160926
8-10
5/16-3/8
-
-
0.4
46771
160927
11-13
7/16-1/2
-
-
1.5
46772
160928
14-16
9/16-5/8
13
1/2
2.6
46773
160929
18-20
3/4
14-16
9/16-5/8
4.3
46774
160930
22-23
7/8
18-20
1 1/16 – 3/4
7.9
46775
160932
28-30
1 1/8
24-25
15/16-1
15.2
46780
160933
32-35
1 ¼-1 3/8
26-28
1 1/16- 1 1/8
22.7
46781
160934
36-39
1 1/2
30-32
1 3/16 – 1 1/4
30.9
46782
134
Rope Size
Structural Strand Dia.
*Distributed by PWB Anchor
1300 722 999
PWB Forged Open Spelter Wire Rope Socket, with round pin: Unit of Measure - Each
(in.)
(mm)
(in.)
PWB Part No.
160935
6-7
1/4
-
-
0.5
46783
160936
8-10
5/16-3/8
-
-
0.6
46785
160937
11-13
7/16-1/2
-
-
1.1
46786
160938
14-16
9/16-5/8
13
1/2
1.7
46787
160939
18-20
3/4
14-16
9/16-5/8
2.6
46788
160940
22-23
7/8
18-20
11/16-3/4
4.7
46789
160941
24-26
1
22-23
13/16-7/8
7.4
46791
160942
28-30
1 1/8
24-25
15/16-1
10.0
46793
160943
32-35
1 1/4-1 3/8
26-28
1 1/16-1 1/8
14.9
46794
160944
36-39
1 1/2
30-32
1 3/16-1 1/4
20.8
46795
Rope Size
Structural Strand Dia.
*Distributed by PWB Anchor
05 - HARDWARE
(mm)
Net Weight (kg)
ORDER CODE
• Forged from special bar quality carbon steel with superior hardness controlled by spheroidize annealing. ‡:KHQFRUUHFWO\DVVHPEOHG6ZDJHVRFNHWWHUPLQDWLRQVKDYHDQHI¿FLHQF\ rating of 100% based on the catalogue strength of wire rope. • Socket size 1/4” thru 3/4” use one groove, 7/8” thru 1-1/2” use 2 grooves • In accordance with AS 1666.1/2009 all assembly slings with poured Spelter Sockets, shall be proof loaded
ORDER CODE
Rope Size (in.)
Max After Swage Dim. (in.)
Net Weight (Lbs)
PWB Part No.
PWB Steel Swage Sleeve (Zinc Plated): Unit of Measure - Each
164465
¼
0.57
0.05
46848
164466
5/16
0.75
0.14
46849
164467
3/8
0.75
0.14
46850
164468
7/16
1.01
0.3
46851
164469
½
1.01
0.4
46852
164470
5/8
1.24
0.6
46854
164471
¾
1.46
0.9
46855
164472
7/8
1.68
1.3
46856
164473
1
1.93
2.0
46857
164474
1-1/8
2.13
2.6
46858
164475
1-1/4
1.32
3.6
46859
164476
1-3/8
2.52
4.2
46860
164477
1-1/2
2.71
5.0
46861
164478
1-3/4
3.10
8.0
46862
164479
2
3.56
11.3
46863
164480
2-1/4
4.12
19.4
46864
164481
2-1/2
4.50
23.5
46865
164482
2-3/4
4.70
28.0
46866
164483
3
4.96
29.4
46867
164484
3-1/2
5.77
46.4
46868
164485
3-3/4
6.23
55.0
46869
164486
4
6.69
68.0
46870
WWW.BULLIVANTS.COM
*Distributed by PWB Anchor
135
Wire Rope Grips
Thimbles
Wire Rope Grips AS2076: Unit of Measure - Each
Thimbles are used at the ends of wire rope to reinforce the eye and obviate damage and wear to the wire rope from any connected lifting tackle or other connection. Types of Thimbles
10
M10
49
27
10
0.12
160004
12
M12
59
32
12
0.21
160010 13-14
M14
70
38
14
0.23
160005
16
M14
77
41
14
0.48
160011
18-19
M16
89
47
16
0.53
160007
22
M20
108
58
20
0.58
160008
26
M20
117
61
20
1.12
160012
28
M22
127
66
22
1.41
160013
32
M22
136
70
22
2.07
Other sizes up to 75mm are available upon request.
Commercial Grade Wire Rope Grips: Unit of Measure - Each
31
12
3.6
9
4.4
160316
10
25
38
15
4.5
11
5.5
160317
12
30
46
18
5.4
13
6.6
160333
14
35
54
21
6.3
15
7.7
160318
16
40
61
24
7.2
18
8.8
Rope Size (mm)
20
ORDER CODE
8
Rope Size (mm)
160315
ORDER CODE
Not for lifting applications.
J (mm)
160003
H (mm)
Weight (kg)
0.06
G (mm)
G (mm)
8
F (mm)
D (mm)
22
B (mm)
B (mm)
41
A (mm)
A (mm)
M8
Size (mm)
Size (mm)
8
ORDER CODE
ORDER CODE
160002
160041
3
160036
12
160319
20
50
76
31
9
22
11
160029
3/4
160042
14
160321
22
55
84
34
9.9
24
12
160030
5
160037
16
165054
24
60
92
37
11
26
13
160031
6
160043
20
160337
26
65
99
40
12
28
14
160032
8
160044
22
160323
28
70
107
43
13
30
15
160035
10
160045
25
160324
32
80
122
49
15
35
24
160327
36
90
137
55
17
39
27
160340
44
110
168
68
20
48
33
160329
52
130
198
80
24
56
39
Other sizes available.
Rope Dia. (mm)
Bearing Surface (mm)
Width (mm)
Dia. of “U” Bolt (mm)
Double Throat Grips: Unit of Measure - Each ORDER CODE
05 - HARDWARE
Not for lifting applications.
Wire Rope Thimbles are made from mild steel and are hot dipped galvanised with blue paint on the tips in accordance with AS1138. Commercial Grade Thimbles are not manufactured to any standard and are made from light gauge material. Normally used in light applications and supplied in electro galvanised ¿QLVK Stainless Steel Thimbles are not manufactured to any standard and are usually used with stainless steel wire rope when corrosion could be a cause for concern. Solid Thimbles are used for loads that are secured by a bolt or pin and can be drilled (bored) out to match that pin or bolt, refer to AS1138. Wire Rope Thimbles - AS1138: Unit of Measure - Each
160009
10/12
40
52
10
160016
16
46
58
10
136
1300 722 999
Solid Heart Thimbles: Unit of Measure - Each
Rope Size (mm)
Weight (kg)
8
E (mm)
160375
D (mm)
6
C (mm)
160373
B (mm)
5
160374
A (mm)
3
Rope Dia. (mm)
160380
ORDER CODE
Order Code
Commercial Grade Galvanised Thimbles: Unit of Measure - Each
160330
16
96
71
27
52
17
1
160376
10
160331
20
117
84
29
63
22
1.05
160377
12
160364
28
170
125
44
90
30
4.2
160382
16
05 - HARDWARE
Other sizes available.
Other sizes available.
Crosby G-414 Thimbles: Unit of Measure - Each
Rope Dia.
(mm)
(in.)
160774
*6-7
1/4
160775
*8
160776
Weight Per 100 (kg)
ORDER CODE
• Available in Hot Dip galvanized or Stainless Steel (Type 304). • Stainless steel recommended for more corrosive environments where greater protection is required. • Greater protection against wear and deformation of the wire rope eye. • Longer service life. Dimensions (mm)
A
B
C
D
E
F
G
H
2.95
55.5
41.4
38.1
22.4
11.2
7.10
1.50
5.85
5/16
5.35
63.5
47.8
46.0
26.9
14.0
8.65
2.05
7.10
*9-10
3/8
9.80
73.0
54.0
54.0
28.7
16.8
10.4
2.80
8.65
160777
11-12
7/16
15.7
82.5
60.5
60.5
31.8
18.8
11.9
3.30
9.65
160778
*13-15
1/2 - 9/16
23.1
92.0
70.0
70.0
38.1
23.4
13.5
3.55
10.4
160779
*16
5/8
34.3
108
82.5
79.5
44.5
26.2
16.8
4.05
12.7
160780
*18-20
3/4
72
127
95.5
96.5
51.0
33.0
19.8
5.60
16.8
160781
22
7/8
81
140
108
108
57.0
37.3
23.9
5.60
19.1
160782
24-26
1
142
156
114
125
63.5
44.5
26.9
6.35
22.4
160783
28-32
1 - 1/8 - 1-1/4
181
178
130
149
73.0
47.8
33.3
6.35
28.7
160784
32-35
1 - 1/4 - 1-3/8
402
230
165
173
89.0
57.2
36.6
9.65
28.7
160785
35-38
1 - 3/8 - 1-1/2
587
229
159
181
89.0
66.5
39.6
12.7
28.7
160786
40
1 - 5/8
771
286
203
207
102
76.2
43.7
12.7
35.1
160787
44
1 - 3/4
805
310
229
216
114
77.7
46.7
12.7
33.3
160788
48-52
1 - 7/8 - 2
1259
384
305
264
152
85.9
53.0
12.7
38.1
160789
56
2 - 1/4
1792
435
356
302
178
98.6
60.5
16.0
41.4
WWW.BULLIVANTS.COM
137
Ferrules
160237
4.5
160176
5
160164
6
160200
6.5
160177
7
160165
8
160166
9
160167
10
160178
11
160168
12
160179
13
160169
14
160170
16
160171
18
160180
20
160172
22
160181
3.5
160188
4
160211
4.5
160189
5
160190
6
160191
6.5
160212
7
160213
8
160192
9
160193
10
160214
11
160194
12
160215
13
160195
14
160216
16
160217
18
160218
22
Brand
4
160187
160196
1/2
160220
3
Bridge & Co
160197
5/8
160222 3.2 Dolphin Marine
160227
3/4
160224
4
Dolphin Marine
160289
1
160260
4
Bridge & Co
160290
1-1/8
160293
1-3/4
160294
2
Other sizes available. Hand Swaged Copper Ferrules: Unit of Measure - Each
160219
1.6
160221
3.2
160223
4
24
160225
4.8
160182
26
Other sizes available.
160183
28
160184
30
160243
32
160185
34
160201
38
160202
40
165040
16
160203
42
160282
18
160245
44
160285
22
160204
46
160228
26
160205
54
160229
32
138
Steel Ferrules: Unit of Measure - Each
Hand Swaged Alloy Ferrules: Unit of Measure - Each
Size (mm)
160175
3
Size (mm)
3.5
160209
3/8
ORDER CODE
160174
2.5
160226
ORDER CODE
3
160208
Size (in.)
160173
2
Size (mm)
2.5
160186
ORDER CODE
160199
1.5
ORDER CODE
2
Size (mm)
160198
160207
Size (mm)
1.5
ORDER CODE
Size (mm)
160233
Copper Ferrules DIN Grade Australoc Ferrules – Grade Hand Swaged Nickel 3093: Unit of Measure - Each S505: Unit of Measure - Each Plated Copper Ferrules: Unit of Measure - Each
ORDER CODE
ORDER CODE
05 - HARDWARE
Aluminium Ferrules DIN Grade 3093: Unit of Measure - Each
160206
4
160249
4.8
160250
5
160251
6
160252
6.4
1300 722 999
Crosby S-409 Swage Buttons: Unit of Measure - Each
Size No.
160790
1 SB
3
1/8
0.91
10.7
12.7
3.56
10.2
15.5
160791
3 SB
5
3/16
1.81
14.2
17.8
5.08
13.2
21.3
160792
5 SB
6-7
1/4
3.63
17.3
26.9
7.87
14.7
33.5
160793
7 SB
8
5/16
7.26
22.4
28.7
9.14
19.6
33.8
160794
8 SB
9-10
3/8
6.80
22.4
37.6
10.7
19.6
42.9
160795
9 SB
11
7/16
13.6
28.7
41.4
12.2
26.2
49.3
160796
10 SB
13
1/2
22.7
33.3
48.0
14.0
29.5
55.1
160797
11 SB
14
9/16
31.8
36.6
51.3
15.5
32.8
61.2
160798
12 SB
16
5/8
45.4
39.6
61.5
17.0
36.1
73.4
160799
13 SB
18-20
3/4
59
42.7
69.6
20.3
39.6
82.6
160800
14 SB
22
7/8
100
50.8
83.1
23.9
45.7
98.0
160801
15 SB
25-26
1
141
57.2
93.2
26.9
52.1
111
160802
16 SB
28-29
1-1/8
204
65.0
103
30.2
58.4
122
160803
17 SB
31-32
1-1/4
295
71.4
116
33.8
65.0
138
(mm)
(in.)
Before Swage Dimensions (mm)
After Swage Dimensions (mm)
A
B
C
D Max. After Swage Dimensions
E Length*
05 - HARDWARE
Rope Size
Weight Per 100 (kg)
ORDER CODE
‡6ZDJH%XWWRQWHUPLQDWLRQVKDYHDQHI¿FLHQF\UDWLQJRIEDVHG on the catalog strength of wire rope. • Special processed, low carbon steel. • COLD TUFF® for better swageability. ‡6WDPSIRULGHQWL¿FDWLRQDIWHUVZDJLQJZLWKRXWFRQFHUQIRUIUDFWXUHV (as per directions in National Swaging Brochure).
* NOTE: Length is measured from outside end of termination.
WWW.BULLIVANTS.COM
139
NCG Cable Stockings
Single Eye “Cap” Style (Tubular): Unit of Measure - Each
Cable stockings are available in a variety of designs to suit different applications including cable hauling, load restraint, cable splicing (ing), re-roping cranes and airline or hydraulic hose restraint. Our cable stockings are serial numbered, stamped with LGHQWL¿FDWLRQDQGDQ\SURWUXGLQJZLUHHQGVDUHFRYHUHGZLWK plastic adhesive to reduce manual handling risks. Fitting Precautions
Lace Up: Unit of Measure - Each
165130
14-19
165131
19-28
165189
28-40
165196
40-55
165200
55-75
165209
75-95
165212
95-120
Offset Eye (Tubular): Unit of Measure - Each
140
14-19
165441
19-28
165443
28-40
165445
40-55
165446
55-75
165447
75-95
165448
95-120
To Suit Diameter of Cable (mm)
165439
This design allows the cable to through the stocking so it FDQEH¿WWHGDQ\GLVWDQFHIURPWKHFDEOHHQG,WVPDLQXVHLV to electrical and hydraulic and other hoses in marine, industrial and mining applications. Also used for strain relief on trailing supply lines.
ORDER CODE
To Suit Diameter of Cable (mm)
7KLVW\SHLVDÀDWZRYHQGHVLJQWKDWFDQEHZUDSSHGDURXQGWKH cable or rope at any position, and secured with a lace. This type FDQEHXVHGZKHUHLWLVQRWSRVVLEOHWR¿WDWXEXODUVWRFNLQJRYHU the end of the cable.
ORDER CODE
05 - HARDWARE
Standard Cable Stockings
To Suit Diameter of Cable (mm)
• Any sizes outside this range available on request • 2070 Galvanised Strand OR 316 Stainless Steel Strand • Copper OR Stainless Steel Ferrules • Soft Eye OR Thimbles
This is the most commonly used type of cable stocking. It is ¿WWHGRQWRWKHHQGRIWKHFDEOHLQRUGHUWRSXOOLWLQWRSODFH
ORDER CODE
1. Always ensure the entire plaited length of the stocking is in with the cable to be hauled. 2. Ease out any ‘bubbles’ or slack in the stocking to ensure maximum of grip to cable. 3. Always fasten the mouth end of the stocking to the cable by means of tie wire or similar. This will guard against accidental release, especially in the case of a reverse haul. 4. Always tape over the fastening at the mouth end to ensure a smooth transition from stocking to cable. Variations
165336
14-19
165337
19-28
165190
28-40
165338
40-55
165339
55-75
165340
75-95
165341
95-120
1300 722 999
Double Eye (Tubular): Unit of Measure - Each
Open Both Ends (Tubular): Unit of Measure - Each
This design has similar properties to the offset eye in that it can EH¿WWHGWRDQ\SRVLWLRQRQWKHFDEOH7KHH[WUDH\HLVSURYLGHG WROLIWWKHDVVHPEO\ZKLOHWKHRWKHUH\HLVPDGHRIIWRD¿[WXUH When hauling with only one eye the breaking strength is greatly reduced. To Suit Diameter of Cable (mm)
165432
19-28
165433
28-40
ORDER CODE
To Suit Diameter of Cable (mm)
165434
40-55
165408
10-14
165201
55-75
165409
14-19
165435
75-95
165178
19-28
165436
95-120
165410
28-40
165411
40-55
05 - HARDWARE
ORDER CODE
Stockings are a tubular design with no eye which allow a cable to be spliced or ed.
Specialty Stockings Heavy Duty (Tubular): Unit of Measure - Each
Non Conductive (Tubular): Unit of Measure - Each
ORDER CODE
To Suit Diameter of Cable (mm)
ORDER CODE
To Suit Diameter of Cable (mm)
Nylon stockings are available to suit Low and High Voltage Stockings are available for added tensile strength and durability. Aerial Bundled Conductor overhead lines.
165437
10-14
165412
2 x 35mm² LV ABC
165438
14-19
165413
2 x 50mm² LV ABC
165440
19-28
165414
2 x 95mm² LV ABC
165442
28-40
165415
3 x 120mm² HV ABC
165444
40-55
165416
3 x 150mm² HV ABC
WWW.BULLIVANTS.COM
141
Heavy Duty Graded Weave (Tubular): Unit of Measure - Each
ORDER CODE
To Suit Diameter of Cable (mm)
165417
8-11
165418
10-15
165419
15-21
165420
20-29
165421
27-35
165422
32-37
Hose Restraints (Tubular): Unit of Measure - Each
142
To Suit Diameter of Cable (mm)
These are double eyed cable stockings with a protective adhesive sheath over the “legs” of the stocking. They are designed to contain a pressurised hose in the event of hose connection failure. Hose Restraints are also available in custom lengths with double eyes at both ends to secure both ends and the entirety of a hose.
ORDER CODE
05 - HARDWARE
6WRFNLQJVDUHGHVLJQHGVSHFL¿FDOO\IRUKLJKWHQVLRQKDXOLQJRI bare or insulated conductor lines. They utilise extra material for higher breaking strengths at smaller cable diameters, and extra length for assured grip onto bare metal conductor.
165423
19-28
165425
28-40
165426
40-50
165427
50-60
165428
60-70
165429
70-85
165430
85-100
165431
100-120
1300 722 999
Sheave Blocks
Capacity (kg)
Head Fitting
PWB Part No..
164448
63
10.0
250
Hook
45622
164080
75
12.0
250
Hook
45639
164089
100
16.0
500
Hook
45672
164098
125
20.0
1000
Hook
45706
164102
150
24.0
1000
Hook
45723
164454
200
32.0
2000
Hook
45757
164455
63
10.0
250
Eye
45614
164456
75
12.0
250
Eye
45631
164087
100
16.0
500
Eye
45664
164457
125
20.0
1000
Eye
45698
164458
150
24.0
1000
Eye
45715
164459
200
32.0
2000
Eye
45749
05 - HARDWARE
Rope Size (mm)
An extensive range of manually operated Snatch and Sheave %ORFNVKDVEHHQVSHFL¿FDOO\GHVLJQHGIRUXVHZLWK0DQLOODDQG Wire Rope. With fully interchangeable sheaves and supplied with either drop forged swivel hooks or eyes, this range comes with beckets standard on single and double blocks. Bronze Bushes and safety latches are also standard across the range. PWB Anchor Snatch Blocks - Wire Rope: Unit of Measure - Each
Sheave Dia. (mm)
PWB Anchor Manually Operated Sheave Blocks
ORDER CODE
Bullivants can supply a broad range of blocks including Single, Snatch, Double, Treble and the world renown Crosby range of pulley blocks, up to 50 tonne WLL. Types and Selection Blocks are used in a variety of applications from crane hoist and OXI¿QJV\VWHPVVKLSORDGHUVFRQFUHWHµWLOWVODE¶DUUDQJHPHQWV and many more.
Capacity (kg)
Head Fitting
PWB Part No..
5.0
250
Hook
45623
164081
75
6.0
250
Hook
45640
164090
100
8.0
500
Hook
45673
164099
125
10.0
1000
Hook
45707
ORDER CODE
Sheave Dia. (mm)
Rope Size (mm)
Capacity (kg)
164009
150
12.0
1000
Hook
45724
164021
63
5.0
250
Hook 45624
1.0
164010
200
16.0
2000
Hook
45758
164025
75
6.0
250
Hook 45641
1.0
165016
63
5.0
250
Eye
45615
164034
100
8.0
500
Hook 45674
2.3
164079
75
6.0
250
Eye
45632
164043
125
10.0
1000 Hook 45708
4.2
164088
100
8.0
500
Eye
45665
164049
150
12.0
1000 Hook 45725
6.7
164097
125
10.0
1000
Eye
45699
164054
200
16.0
2000 Hook 45759
13.8
164008
150
12.0
1000
Eye
45716
164019
63
5.0
250
Eye
45616
0.8
164111
200
16.0
2000
Eye
45750
164023
75
6.0
250
Eye
45633
1.0
164032
100
8.0
500
Eye
45666
2.1
164449
125
10.0
1000
Eye
45700
3.8
164450
150
12.0
1000
Eye
45717
6.1
164451
200
16.0
2000
Eye
45751
13.6
PWB Anchor Snatch Blocks - Manilla Rope: Unit of Measure - Each
Weight (kg)
Rope Size (mm)
63
PWB Part No.
Sheave Dia. (mm)
164078
Head Fitting
ORDER CODE
PWB Anchor Single Sheave Blocks - Wire Rope: Unit of Measure - Each
PWB Anchor Single Sheave Blocks – Manilla Rope: Unit of Measure - Each
WWW.BULLIVANTS.COM
143
75
12
250
Hook
45638
164033
100
16
500
Hook
45671
164042
125
20
1000
Hook
45705
164460
150
24
1000
Hook
45722
203749
200
32
2000
Hook
45756
164461
63
10
250
Eye
45613
164462
75
12
250
Eye
45630
164031
100
16
500
Eye
45663
164463
125
20
1000
Eye
45697
164464
150
24
1000
Eye
45714
164053
200
32
2000
Eye
45748
PWB Anchor Double Sheave Blocks – Wire Rope: Unit of Measure - Each
PWB Part No.
PWB Part No.
164024
Head Fitting
Head Fitting
45621
Capacity (kg)
Capacity (kg)
Hook
Rope Size (mm)
Rope Size (mm)
250
Sheave Dia. (mm)
Sheave Dia. (mm)
10
ORDER CODE
ORDER CODE
63
164017
63
10
250
Hook
45619
164022
75
12
250
Hook
45636
164495
100
16
750
Hook
45669
164040
125
20
1000
Hook
45703
164496
150
24
1500
Hook
45720
164497
63
10
250
Eye
45611
164498
75
12
250
Eye
45628
164499
100
16
750
Eye
45661
164500
125
20
1000
Eye
45695
164501
150
24
1500
Eye
45712
164502
200
32
3000
Eye
45746
Sheave Dia. (mm)
Rope Size (mm)
Capacity (kg)
Head Fitting
PWB Part No.
164018
63
5
250
Hook
45620
164487
75
6
250
Hook
45637
ORDER CODE
Sheave Dia. (mm)
Rope Size (mm)
Capacity (kg)
Head Fitting
PWB Part No.
PWB Anchor Treble Sheave Blocks – Wire Rope: Unit of Measure - Each
ORDER CODE
05 - HARDWARE
164020
164488
100
8
750
Hook
45670
164503
63
5
250
Hook
45626
164041
125
10
1000
Hook
45704
164504
75
6
250
Hook
45643
164048
150
12
1500
Hook
45721
164505
100
8
750
Hook
45676
164489
200
16
3000
Hook
45755
164506
125
10
1000
Hook
45710
164490
63
5
250
Eye
45612
164507
150
12
1500
Hook
45727
164491
75
6
250
Eye
45629
164508
200
16
4000
Hook
45761
164492
100
8
750
Eye
45662
164509
75
6
250
Eye
45635
164493
125
10
1000
Eye
45696
164510
100
8
750
Eye
45668
164047
150
12
1500
Eye
45713
164511
125
10
1000
Eye
45702
164494
200
16
3000
Eye
45747
164512
150
12
1500
Eye
45719
PWB Anchor Double Sheave Blocks – Manilla Rope: Unit of Measure - Each
144
PWB Anchor Treble Sheave Blocks – Manilla Rope:
1300 722 999
Unit of Measure - Each
Crosby Snatch Blocks
164026
75
12
250
Hook
45642
164514
100
16
750
Hook
45675
164515
125
20
1000
Hook
45709
164516
150
24
1500
Hook
45726
164517
75
12
250
Eye
45634
164518
100
16
750
Eye
45667
164519
125
20
1000
Eye
45701
164520
150
24
1500
Eye
45718
PWB Anchor Trawl Blocks: Unit of Measure - Each
Type
WLL (tonnes)
Sheave Dim. (in.)
Rim Thickness
Net Weight (kg)
164521
Needle
5
6
2¾
11.9 46732
164522
Tapered
10
8
2 7/8 19.7 46741
5
6
2¾
164523 Bronze Brushed
WWW.BULLIVANTS.COM
PWB Part No.
ORDER CODE
*Distributed PWBsteel Anchor • Manufactured with the highestby quality available • Corrosive resistant for increased block life in a salt water environment ‡%ORFNVDUHVXSSOLHGZLWKDSUHVVXUHOXEHG¿WWLQJIRUD longer lock life • Bearings are sealed for increased block life and performance • Each block is individually tested for maximum safety
14.2 46736
165450
*3
BB
8-10
2
1.90
165342
**3
BB
8-10
2
1.81
165343 **4-1/2
BB
10-13
4
5.44
165344
6
BB
16-19
8
12.6
165345
6
RB
16-19
8
12.6
165346
8
BB
16-19
8
15.4
165347
8
RB
16-19
8
15.4
165348
10
BB
16-19
8
19.1
165349
10
RB
16-19
8
19.1
165350
12
BB
16
8
22.2
165351
12
RB
16
8
22.2
165352
12
BB
19
8
22.2
165353
12
RB
19
8
22.2
165354
14
BB
16
8
25.4
165355
14
RB
16
8
25.4
165356
14
BB
19
8
25.4
165357
14
RB
19
8
25.4
165358
16
BB
19
15
61
165359
16
RB
19
15
61
165360
16
BB
22
15
61
165361
16
RB
22
15
61
165362
18
BB
22
15
70
165363
18
RB
22
15
70
165364
18
BB
26
15
70
165365
18
RB
26
15
70
145
05 - HARDWARE
45625
Weight Each (kg.)
PWB Part No.
Hook
WLL (tonnes)*
Head Fitting
250
Wire Rope Size (mm)
Capacity (kg)
10
Bearing Code
Rope Size (mm)
63
Sheave Dia. (in.)
Sheave Dia. (mm)
164513
ORDER CODE
ORDER CODE
• Drop forged, heat treated swivel hook or swivel shackle. • Hook and shackle assemblies on 8” through 14” sizes can be interchanged. • Can be furnished with bronze bushings or roller bearings. ‡3UHVVXUHOXEH¿WWLQJV • 430 and 431 blocks have exclusive bolt retaining spring to assure no lost bolts. • Can be furnished with hook latch. • 8” and 10” models furnished with dual rated wireline sheaves. • Fatigue Rated. • All sizes are RFID EQUIPPED. Crosby 419 Snatch Blocks Unit of Measure - Each
26-28
39.5
165367
20
8
RB
26-28
39.5
165368
20
10
BB
26-28
45.8
165369
20
10
RB
26-28
45.8
165370
20
12
BB
26
52
165371
20
12
RB
26
52
165372
20
12
BB
28
52
165373
20
12
RB
28
52
165374
20
14
BB
26
61
165375
20
14
RB
26
61
165376
20
14
BB
28
61
165377
20
14
RB
28
61
165378
25
18
BB
26
118
165379
25
18
RB
26
118
165380
25
18
BB
28
118
165381
25
18
RB
28
118
165382
30
20
BB
28
181
165383
30
20
RB
28
181
165384
30
20
BB
32
181
165385
30
20
RB
32
181
165386
30
24
BB
28
215
165387
30
24
RB
28
215
165388
30
24
BB
32
215
165389
30
24
RB
32
215
Weight Each (kg.)
Weight Each (kg.)
BB
Wire Rope Size (mm)
Wire Rope Size (mm)
8
Sheave Dia. (mm)
Bearing Code
20
WLL (tonnes)*
Sheave Dia. (in.)
165366
‡$ZLGHYDULHW\RIFRQ¿JXUDWLRQV • 4, 8, 12 or 15 metric ton capacity • 10mm to 25mm wire line sizes ‡3DLQWHGRU*DOYDQL]HG¿QLVK • 203mm and 254mm blocks furnished with dual rated wireline sheaves. • Forged steel swivels, tees, yokes and shackles are Quenched & Tempered. • Sheave lubrication through center pin for easy maintenance. • Design factor of 4 to 1 • All blocks 356mm and larger are furnished with McKissick® 5ROO)RUJHGŒVKHDYHVZLWKÀDPHKDUGHQHGJURRYHV • Recessed sideplate design reduces the gap between the sheave rim and the sideplate, allowing the sheave assembly to be captured in the block if loss of center pin occurs. • Sealed tapered roller bearings extend the life of the center pin and bearings, and allows for faster line speeds than recommended with standard snatch blocks. ‡6KDFNOH¿WWLQJVZLYHOVIRUHDV\SRVLWLRQLQJ • Suitable for hoisting personnel, contingent upon all employees, including the winch operator, being trained to follow any applicable Federal, local and industry standards. • Tugger/Derrick applications: API RP54 • Tower applications: OSHA directive L 2-1.36 • Holes through side plates are available for secondary block securement device. ‡0DQXIDFWXUHGE\DQ$3,4&HUWL¿HGIDFLOLW\ ‡7\SH$SSURYDODQGFHUWL¿FDWLRQLQDFFRUGDQFHZLWK ABS 2006 Steel Vessel Rules 1-1-17.7, and ABS Guide IRU&HUWL¿FDWLRQRI&UDQHV • All sizes are RFID EQUIPPED. ORDER CODE
WLL (tonnes)*
Crosby M-491 Tower Derrick Hoist Block: Unit of Measure - Each
ORDER CODE
05 - HARDWARE
Crosby 431 Snatch Blocks: Unit of Measure - Each
165407
4
203
10 - 13
16
165390
8
254
10 - 13
25
165391
8
254
13 - 14
25
165392
12
254
13 - 14
25
165393
12
356
16
43
165394
12
356
19
43
165395
15
406
22
68
165396
15
406
25
48
*Ultimate Load is 4 times the Working Load Limit
146
1300 722 999
To Suit Wire Size (in.)
100
3/8-1/2
Weight (kg)
Sheave Dia. (mm)
4
Gunnebo Part No.
WLL (tonnes)
164075
Head Fitting
ORDER CODE
Gunnebo Johnson Swivel Hook - Snatch Block Wire: Unit of Measure - Each
Swivel Hook JSB04S04BS
7
Other sizes and capacities available.
Sheave Dia. (mm)
To Suit Wire Size (in.)
WLL (tonnes)
Head Fitting
Gunnebo Part No.
Weight (kg)
164004
75
5/16-3/8
2
Swivel Shackle
SB2S3BS
2.4
164005
100
3/8-1/2
4
Swivel Shackle
SB4S4BS
6.8
164076
152
3/8-1/2
4
Swivel Shackle
SB4S6BS
8.2
164006
150
5/8-3/4
8
Swivel Shackle
SB8S6BS
13.2
164007
203
5/8-3/4
8
Swivel Shackle
SB8S8BS
16.5
164441
250
3/4-7/8
12
Swivel Shackle SB12S10BS
30
164442
350
3/4-7/8
15
Swivel Shackle SB15S14BS
50
164443
400
1-1 1/8
20
Swivel Shackle SB22S16BS
80
164444
500
1 1/8-1 1/4
30
Swivel Shackle SB30S20BS
155
05 - HARDWARE
ORDER CODE
Gunnebo Johnson Swivel Shackle - Snatch Block Wire: Unit of Measure - Each
Other sizes and capacities available.
Hooks
Grip Clip (R Clip): Unit of Measure - Each
Alloy Shank Hook with Latch: Unit of Measure - Each
Types and Selection
4
12-22
Weight (kg)
160034
121525
11
6.12
165030
15
8.16
Other sizes available.
Other sizes available.
ORDER CODE
WLL (tonnes)
Eye Size (mm)
Weight (kg)
Fitted with industrial thrust bearing to rotate under load and seals. Compact design for easy handling.
164132
16
88
15.8
164133
18
105
16
Other sizes available.
Lynch Pin: Unit of Measure - Each
Pin Diameter (mm)
10-12
WLL (tonnes)
To suit Shaft Size (mm)
3
ORDER CODE
Size (mm)
160033
ORDER CODE
ORDER CODE
Swivel Crane hooks and Shank hooks are available in a standard range up to 25t with larger available. Are manufactured in accordance with AS3777. Swivel Alloy Hooks with Thrust 6DIHW\ODWFK¿WWHGDVVWDQGDUG Bearing & Seals: Unit of Measure - Each
165046
4.5
165135
6
165136
8
165251
11
Other sizes available.
WWW.BULLIVANTS.COM
147
Shackles Eyebolts Eyenuts, Lifting Loops & Concrete Lifting Eyes Rigging Screws & Turnbuckles Wire Rope Terminations Thimbles Ferrules NCG Cable Stockings Sheave Blocks Hooks
106 - 147
Shackles
Grade M Black Screw Dee Shackles: Unit of Measure - Each
WLL (tonnes)
D (mm)
W (mm)
L (mm)
10
13
25
Screw 0.09
160629
3/8”
9.53
0.50
13
19
38
Screw 0.18
160630
1/2”
12.70
0.75
16
28
54
Screw 0.37
160631
5/8”
15.88
1.50
19
32
63
Screw 0.66
160632
3/4”
19.05
2.00
22
38
73
Screw 1.04
160634
7/8”
22.23
3.00
25
44
83
Screw 1.61
160639
1”
25.40
3.80
29
51
95
Screw 2.27
160640 1 1/8” 28.58
5.00
32
54 105 Screw 3.24
05 - HARDWARE
Weight (kg)
Size d (mm)
0.25
Closing Method
Size d (in.)
6.35
Other sizes available. Tolerances on Dimensions +8% - 5% as per AS2741.
WLL (tonnes)
D (mm)
W (mm)
L (mm)
Weight (kg)
Grade M Galvanised Screw Dee Shackles: Unit of Measure - Each
Size d (mm)
The colour of the Shackle pin is related to the supplier and not the Standards.
1/4”
Size d (in.)
• Ensure that all markings are clearly legible. • Ensure pin is the correct type. Never replace the pin of a shackle with a bolt. • The threads of the pin and body are undamaged and the pin screws freely into position. • The body and pin is not unduly worn and free from distortion, nicks, gouges, cracks and excessive wear and corrosion. • The pin is screwed tightly with the collar and the pin is bedded evenly on the surface of the shackle eye. • The correct type of pin is used for the application. • A bolt type shackle has a split cotter (safety pin) attached correctly. • Shackles should not be heat treated as this may affect their working load limit. • Never modify, repair or reshape a shackle by welding, heating or bending as this will affect the working load limit.
160638
ORDER CODE
Screw Pin Shackles mainly used for non-permanent applications. Bolt with Safety Pin Shackles preferable for long term or permanent applications or where the load may slide on the pin causing rotation to the pin. Also used on equipment that may vibrate to ensure pin does not become dislodged. Dee Shackles only used for single leg applications - never multi leg as the body and pin may distort. Bow Shackles can be used on either single or multi-leg applications. Grade M Shackles generally comply with AS2741. In accordance with AS2741 shackles should be marked with ://PDQXIDFWXUHUVLGHQWL¿FDWLRQJUDGHRIPDWHULDODQGEDWFK number. Grade S Shackles generally comply with Australian Standard 2741 with approximately twice the working load limit of Grade M Shackles. In accordance with AS2741 shackles should EHPDUNHGZLWK://PDQXIDFWXUHUVLGHQWL¿FDWLRQJUDGHRI material and batch number. Commercial Grade Shackles are not to be used for lifting purposes. Stainless Steel Shackles are not to be used for lifting purposes. Care & Use
ORDER CODE
A shackle is used for interconnecting components in lifting, tensioning and staying systems. A shackle consists of a body, a removable pin and any applicable locking device. Types of Shackles
160628
1/4”
6.35
0.25
10
13
25
0.09
160625
3/8”
9.53
0.50
13
19
38
0.18
160626
1/2”
12.70
0.75
16
28
54
0.37
160627
5/8”
15.88
1.50
19
32
63
0.66
160633
3/4”
19.05
2.00
22
38
73
1.04
160635
7/8”
22.23
3.00
25
44
83
1.61
160636
1”
25.40
3.80
29
51
95
2.27
160637 1 1/8” 28.58
5.00
32
54
105
3.24
160644 1 1/4” 31.75
6.00
35
60
114
4.5
160641 1 3/8” 34.93
7.00
38
67
127
6.18
160642 1 1/2” 38.10
9.50
44
70
137
8.22
Other sizes available.
WWW.BULLIVANTS.COM
107
ORDER CODE
Size d (mm)
WLL (tonnes)
D (mm)
W (mm)
B (mm)
L (mm)
Weight (kg)
160554
5
0.33
6
10
15
22
0.02
160555
6
0.50
8
12
20
29
0.06
160556
8
0.75
10
13
21
31
0.11
160557
10
1.00
11
17
26
37
0.15
160558
11
1.50
13
18
29
43
0.21
160559
13
2.00
16
21
33
48
0.37
160560
16
3.25
19
27
43
61
0.65
160561
19
4.70
22
32
51
72
1.06
160562
22
6.50
25
37
58
84
1.56
160563
25
8.50
29
43
68
95
2.32
160573
29
9.50
32
46
74
108
3.30
160564
32
12.00
35
52
83
119
4.51
160574
35
13.50
38
57
92
133
5.93
160575
38
17.00
41
60
98
146
7.89
160577
44
25.00
51
73
127
178
14.99
160600
51
35.00
57
83
146
197
18.85
Other sizes available.
Size d (mm)
WLL (tonnes)
D (mm)
W (mm)
L (mm)
Weight (kg)
Grade S Tested Galvanised Screw Dee Shackles: Unit of Measure - Each ORDER CODE
05 - HARDWARE
Grade S Tested Galvanised Screw Bow Shackles: Unit of Measure - Each
160508
6
0.50
8
12
22
0.60
160509
8
0.75
10
13
26
0.11
160510
10
1.00
11
17
32
0.15
160511
11
1.50
13
18
37
0.21
160512
13
2.00
16
21
41
0.37
160513
16
3.20
19
27
51
0.65
160514
19
4.70
22
32
60
1.06
160515
22
6.50
25
37
71
1.56
160516
25
8.50
29
43
81
2.32
160528
29
9.50
32
46
90
3.28
160517
32
12.00
35
52
100
4.51
160529
35
13.50
38
57
113
5.93
160531
38
17.00
41
60
124
7.89
160532
44
25.00
51
73
146
14.99
Other sizes available.
108
1300 722 999
Size d (mm)
WLL (tonnes)
D (mm)
w (mm)
B (mm)
L (mm)
Weight (kg)
160565
13
2.00
16
21
33
48
0.44
160567
16
3.25
19
27
43
61
0.79
160569
19
4.75
22
32
51
72
1.06
160570
22
6.50
25
37
58
84
1.88
160572
25
8.50
29
43
68
95
2.78
160589
29
9.50
32
46
74
108
3.87
160591
32
12.00
35
52
83
119
5.26
160594
35
13.50
38
57
92
133
6.94
160595
38
17.00
41
60
98
146
8.79
160576
44
25.00
51
73
127
178
14.99
160598
51
35.00
57
83
146
197
20.65
160618
57
42.50
63
95
160
222
29.10
160602
63
55.00
70
105
184
267
41.05
160604
76
85.00
83
127
200
330
62.24
165024
89
120.00
95
146
241
381
110.00
05 - HARDWARE
ORDER CODE
Grade S Tested Galvanised Safety Pin Bow Shackles: Unit of Measure - Each
Other sizes available.
Green Pin Shackles
ORDER CODE
Size (in.)
Size (mm)
WLL (tonnes)
Pin Dia. (mm)
Weight (kg)
Van Beest manufacture high quality Green Pin® Shackles. The Shackles can be LGHQWL¿HGE\WKHJUHHQFRORXUHGSLQDQGWKHPDUNLQJVRQWKHVKDFNOHERG\DQG pin. Galvanised Safety Pin Bow Shackles: Unit of Measure - Each
160581
3/8”
10
1.00
11
0.16
160605
7/16”
11
1.50
13
0.22
160584
1/2”
13
2.00
16
0.42
160585
5/8”
16
3.25
19
0.74
160607
3/4”
19
4.75
22
1.18
160608
7/8”
22
6.50
25
1.77
160587
1”
25
8.50
28
2.58
160592
1 1/4”
32
12.00
35
4.91
160599
2”
51
35.00
57
19.85
160619
2 1/4”
57
42.50
65
28.33
160603
2 1/2”
65
55.00
70
39.59
160623
3 1/2”
95
120.00
95
110.00
160624
4”
105
150.00
108
160.00
Other sizes available.
WWW.BULLIVANTS.COM
109
ORDER CODE
Size (in.)
Size (mm)
WLL (tonnes)
Pin Dia. (mm)
Weight (kg)
160578
3/16”
5
0.33
6
0.02
160579
1/4”
6
0.50
8
0.05
160580
5/16”
8
0.75
10
0.10
160582
3/8”
10
1.00
11
0.14
160583
7/16”
11
1.50
13
0.19
160566
1/2”
13
2.00
16
0.36
160568
5/8”
16
3.25
19
0.63
160586
3/4”
19
4.75
22
1.01
160571
7/8”
22
6.50
25
1.50
160588
1”
25
8.50
28
2.21
160590
1 1/8”
29
9.50
32
3.16
160593
1 1/4”
32
12.00
35
4.31
160613
1 3/8”
35
13.50
38
5.55
160596
1 1/2”
38
17.00
42
7.43
160597
1 3/4”
45
25.00
50
12.84
160601
2”
51
35.00
57
18.15
Other sizes available.
Size (in.)
Size (mm)
WLL (tonnes)
Pin Dia. (mm)
Weight (kg)
Galvanised Screw Dee Shackles: Unit of Measure - Each ORDER CODE
05 - HARDWARE
Galvanised Screw Bow Shackles: Unit of Measure - Each
160518
1/4”
6
0.50
6
0.05
160519
5/16”
8
0.75
10
0.09
160520
3/8”
10
1.00
11
0.14
160521
7/6”
11
1.50
13
0.19
160523
1/2”
13
2.00
16
0.32
160524
5/8”
16
3.25
19
0.54
160525
3/4”
19
4.75
22
0.87
160526
7/8”
22
6.50
25
1.34
160530
1 3/8”
35
13.50
38
5.14
160533
1 3/4”
44
25.00
50
11.45
Other sizes available.
110
1300 722 999
ORDER CODE
Nom. Size (in.)
WLL (tonnes) *
Weight Each (kg)
Crosby G-2130 Safety Shackles: Unit of Measure - Each
160676
1/2
2
0.36
20.6
16.0
47.8
12.7
33.3
30.2
83.5
58.5
12.7
3.30
1.50
160701
5/8
3-1/4
0.62
26.9
19.1
60.5
16.0
42.9
38.1
106.0
74.5
17.5
6.35
1.50
160702
3/4
4-3/4
1.23
31.8
22.4
71.5
19.1
51.0
46.0
126.0
89.0
20.6
6.35
1.50
160703
7/8
6-1/2
1.79
36.6
25.4
84.0
22.4
58.0
53.0
148.0
102.0
24.6
6.35
1.50
160704
18
8-1/2
2.28
42.9
28.7
95.5
25.4
68.5
60.5
167.0
119.0
26.9
6.35
1.50
160705
1-1/8
9-1/2
3.75
46.0
31.8
108.0
28.7
74.0
68.5
190.0
131.0
31.8
6.35
1.50
160706
1-1/4
12
5.31
51.5
35.1
119.0
31.8
82.5
76.0
210.0
146.0
35.1
6.35
1.50
160707
1-3/8
13-1/2
7.18
57.0
38.1
133.0
35.1
92.0
84.0
233.0
162.0
38.1
6.35
3.30
160708
1-1/2
17
8.62
60.5
41.4
146.0
38.1
98.5
92.0
254.0
175.0
41.1
6.35
3.30
160709
1-3/4
25
15.4
73.0
51.0
178.0
44.5
127.0
106.0
313.0
225.0
57.0
6.35
3.30
160710
2
35
23.7
82.5
57.0
197.0
51.0
146.0
122.0
348.0
253.0
61.0
6.35
3.30
Tolerance +/-
A
B
C
D
E
F
H
L
N
C
A
* NOTE: Maximum Proof Load is 2.0 times the Working Load Limit. Minimum Ultimate Strength is 6 times the Working Load Limit.
ORDER CODE
WLL (tonnes)*
Weight Each (kg)
Crosby G-209R ROV Shackles: Unit of Measure - Each
160711
6-1/2
1.79
36.6
25.4
84.0
148
102
50
58
17
10
160712
8-1/2
2.28
42.9
28.7
95.5
167
119
50
61
18
10
160713
9-1/2
3.75
46.0
31.8
108
190
131
70
83
18
12
160714
12
5.31
51.5
35.1
119
210
146
70
84
23
12
160715
13-1/2
7.18
57.0
38.1
133
233
162
75
91
23
15
160716
17
9.43
60.5
41.4
146
254
175
75
93
24
15
160717
†25
15.4
73.0
51.0
178
313
225
90
114
29
17.5
160718
†35
23.7
82.5
57.0
197
348
253
106
132
30
20
160719
†55
44.6
105
70.0
267
453
327
120
145
45
25
Dimensions (mm)
A +/- 6.35
B
C
H
L
O
P
S
T
* Minimum Ultimate Load is 5 times the Working Load Limit. † Furnished with Galvanized Finish.
WWW.BULLIVANTS.COM
111
05 - HARDWARE
Dimensions (mm)
Commercial Grade Shackles Galvanised Screw Pin Bow Shackles Commercial Grade: Unit of Measure - Each
Gunnebo Standard Shackle No. 855 : Unit of Measure - Each
ORDER CODE
Size (mm)
Grade
Weight (kg)
160666
5
Untested
0.28
160658
6
Untested
0.34
160659
8
Untested
0.70
160660
10
Untested
0.13
160661
12
Untested
0.26
160662
16
Untested
0.50
160663
20
Untested
0.80
Other sizes available.
Standard: • U.S. Fed. Spec. RR.C-271/EN-13889 • DNV 2.7-1 Type Approval No. • S-5661 (WLL 2.0 to 25 tonnes) Material: • High Tensile strength • Quenched and Tempered, Grade 6 Finish: • All parts hot dip galvanised • Brown colour marking Documentation: ‡7HVWFHUWL¿FDWHDQGWUDFHDEOHFHUWL¿FDWHRI WKHERZDQGWKHEROWLQ¿QLVKHGFRQGLWLRQ Temperature:
112
WLL (tonnes)
kgs/100 pcs
Gunnebo Part No.
0.50
7
A085506
160814
8
0.75
13
A085508
160815
9
1.00
17
A085509
160816
11
1.50
25
A085511
160817
13
2.00
42
A085513
160818
16
3.25
70
A085516
19
4.75
120
A085519
160820
22
6.50
170
A085522
160821
25
8.50
250
A085525
Weight (kg)
6
160819
Grade
160813
Size (mm)
Not approved for lifting applications.
Nominal Size
Galvanised Screw Pin Dee Shackles Commercial Grade: Unit of Measure - Each
ORDER CODE
• -20°C to 200°C
ORDER CODE
05 - HARDWARE
Not approved for lifting applications.
160654
5
Untested
0.19
160822
28
9.50
340
A085528
160651
6
Untested
0.34
160823
32
12.00
480
A085532
160652
8
Untested
0.70
160824
35
13.50
700
A085535
160653
10
Untested
0.13
160825
38
17.00
900
A085538
160655
12
Untested
0.24
160826
45
25.00
1500
A085545
160656
16
Untested
0.55
160827
50
35.00
2100
A085552
160657
20
Untested
0.80
160828
57
42.50
2900
A085556
160664
22
Untested
1.30
160829
65
55.00
4100
A085564
160665
25
Untested
2.00
160830
75
85.00
6200
A085576
160831
89
120
11000
A085589
1300 722 999
Gunnebo Arctic Shackle No. 856: Unit of Measure - Each
Gunnebo Super Shackle No. 858: Unit of Measure - Each
Standard:
Standard:
• U.S. Fed. Spec. RR.C-271/EN-13889 • DNV 2.7-1 Type Approval No. • S-5661 (WLL 2.0 to 25 tonnes) Material:
• U.S. Fed. Spec. RR.C-271 • Type IVA Class 3, Grade B Material: • High Tensile Steel. • Quenched and Tempered, Grade 8 Finish:
• Special Alloy Steel, • Quenched and Tempered, Grade 8 Finish:
• 5:1 Documentation:
‡7HVWFHUWL¿FDWHDQGWUDFHDEOHFHUWL¿FDWHRI WKHERZDQGWKHEROWLQ¿QLVKHGFRQGLWLRQ Temperature:
Gunnebo Part No.
0.42
A085613
160833
5/8” - 16
3.30
0.70
A085616
160844
3/4” - 19
4.80
1.20
A085619
160845
7/8” - 22
6.50
1.70
A085622
160846
1” - 25
8.50
2.50
A085625
160847
1.1/8” - 28
9.50
3.40
A085628
160848
1.1/4” - 32
12.00
4.80
A085632
160849
1.3/8” - 35
13.50
7.00
A085635
160850
1.1/2” - 38
17.00
9.00
A085638
160851
1.3/4” - 45
25.00
15.00
A085645
160852
2” - 50
35.00
21.00
A085652
160853
2 1/2” - 65
55.00
41.00
A085664
160854
3” - 75
85.00
62.00
A085676
Gunnebo Part No.
Weight (kgs)
2.00
Weight(kgs)
WLL (tonnes)
1/2” - 13
WLL (tonnes)
Nominal Size
160832
Nominal Size
ORDER CODE
• -40°C to 200°C
ORDERCODE
‡7HVWFHUWL¿FDWHDQGWUDFHDEOH
160855
1/2” - 13
3.30
0.42
A085813
160856
5/8” - 16
5.00
0.70
A085816
160857
3/4” - 19
7.00
1.20
A085819
160858
7/8” - 22
9.50
1.70
A085822
160859
1” - 25
12.50
2.50
A085825
160860
1.1/8” - 28
15.00
3.40
A085828
160861
1.1/4” - 32
18.00
4.80
A085832
160862
1.3/8” - 35
21.00
7.00
A085835
160863
1.1/2” - 38
30.00
8.80
A085838
160864
1.3/4” - 45
40.00
15.00
A085845
160865
2” - 57
55.00
22.00
A085857
160866
2.1/2” - 70
85.00
38.00
A085870
160867
3.1/4” - 83
120
70.00
A085883
160868
4” - 95
150
110
A085895
All lifting shackles conforming to AS2741 are recognisable by markings showing - WLL, manufacturers id, grade of material and batch number - and will have a larger pin material than the body of the shackle. If in doubt Bullivants who have a trained team on hand to assist with your compliance and safety.
WWW.BULLIVANTS.COM
113
05 - HARDWARE
• All parts hot dip galvanised • Brown colour marking Safety factor:
• All parts hot dip galvanised • Brown colour marking Documentation:
Gunnebo ROV Shackle No. 860: Unit of Measure - Each
RUD VIP Foolproof Shackles - VV - GSCH: Unit of Measure - Each
Material:
Weight (kgs)
Gunnebo Part No.
32
12
4.80
A086032
160870
38
17
9.00
A086038
160871
45
25
15.00
A086045
160872
50
35
20.00
A086052
160873
65
55
41.00
A086064
RUD Part No.
WLL (tonnes)
160869
WLL (tonnes)
Nominal Size
‡7HVWFHUWL¿FDWHDQGWUDFHDEOH ‡FHUWL¿FDWHFDQEHVXSSOLHG ORDER CODE
05 - HARDWARE
• 5:1 Documentation:
Chain Size (mm)
• All parts hot dip galvanised • Brown colour marking Safety factor:
ORDER CODE
• Clevis mounting • Bolt-pin retained by roll-pin for extra security
• High Tensile Steel. • Quenched and Tempered Finish:
121911
6
1.5
VV GSCH 6
121912
8
2.5
VV GSCH 8
121913
10
4.0
VV GSCH 10
121914
13
6.7
VV GSCH 13
121915
16
10.0
VV GSCH 16
121916
20
16.0
VV GSCH 20
121626
22
20.0
VV GSCH 22
Secured with threads and lock pin.
Eyebolts
Care & Use
Eyebolts of 12mm or smaller should not be used in general lifting, staying or tensioning purposes, because high torsional stresses are easily induced in smaller sizes by being screwed up too tightly. When installing an eyebolt it should be screwed fully down to the face of the lifted load. Types of Eyebolts
• WLL markings are clear and suit the application. • Conduct a visual inspection for deformation and cracking. • Conduct a visual inspection of the inside eye for wear. • Conduct a visual inspection and check for damaged threads. • Ensure the thread centre is aligned with centre of eye. • Ensure the eyebolt’s thread form and the thread form in the corresponding hole or nut is the same. • Avoid excessive tightening of eyebolts. • Metric and imperial eyebolts that conform to the; Australian Standard have a safety factor of 6:1, DIN Standard have a safety factor of 5:1 and Grade 100 have a safety factor of 4:1. • When using eyebolts in pairs, it is essential that care be taken to properly align them. Eyebolts must not be forced into alignment as overstress will cause a reduction in the WLL. • A continuous sling should not be used with pairs of eyebolts. When lifting with pairs of eyebolts ed by slings, always use slings with individual lengths. Eyebolts should be inspected periodically by a competent person as per AS2317.
Forged Collared Eyebolts generally complies with AS2317. In accordance with AS2317 eyebolts should be marked with PDQXIDFWXUHUVLGHQWL¿FDWLRQWKUHDGW\SHQRPLQDOVL]HDQG WLL. DIN Standard 580/582 Eyebolts these eyebolts can be used for lifting but do not conform to AS2317. Normally supplied with metric coarse thread. Commercial Grade Eyebolts are not to be used for lifting purposes and should not be used for ing loads. Stainless Steel Eyebolts are not to be used for lifting purposes. *HQHUDOO\VXSSOLHGLQ*UDGH7KHVH¿WWLQJVDUHORDGUDWHG and can be used for tensioning.
114
1300 722 999
Lifting Collared Eyebolts - AS2317: Unit of Measure - Each
Metric Nominal Size (mm)
Imperial Nominal (in.)
WLL Axial (t)
Trunion Type Mounting WLL (tonnes)
Perpendicular Type Mounting WLL (tonnes)
0º to 30º WLL (tonnes)
31º to 60º WLL (tonnes)
61º to 90º WLL (tonnes)
Thread Pitch
Net Weight (kg)
164178
M10
3/8”
0.25
0.06
0.12
0.31
0.2
0.12
1.5
0.06
164170
M12
1/2”
0.4
0.1
0.2
0.5
0.32
0.2
1.75
0.15
164172
M16
5/8”
0.8
0.2
0.4
1
0.64
0.4
2
0.28
164184
M20
3/4”
1.6
0.4
0.8
2
1.28
0.8
2.5
0.46
164197
M22
7/8”
2
0.5
1
2.5
1.6
1
2.5
0.85
164185
M24
1”
2.5
0.62
1.25
3.1
2
1.25
3
1.1
164201
M30
1 1/8”
4
1
2
5
3.2
2
3.5
2.1
164302
M36
n/a
6.3
1.57
3.1
7.9
5
3.1
4
3.7
0.4
0.25
Reduction factor for single eyebolt use 1 BSW Lifting Collared Eyebolts: Unit of Measure - Each
0.25
0.25
0.63
UNC Thread Lifting Collared Eyebolts: Unit of Measure - Each
General Purpose Zinc Eyebolts: Unit of Measure - Each
ORDER CODE
Size (in.)
WLL (tonnes)
Thread Pitch
Net Weight (kg)
ORDER CODE
Size (in.)
WLL (tonnes)
Thread Pitch
Net Weight (kg)
ORDER CODE
Size (mm)
Thread Pitch
Net Weight (kg)
Not approved for lifting applications.
164176
3/8
0.25
16
0.06
164177
3/8
0.25
16
0.06
164191
M8
1.25
0.03
164179
1/2
0.4
12
0.14
164171
1/2
0.4
13
0.15
164263
M10
1.5
0.06
164180
5/8
0.8
11
0.32
164181
5/8
0.8
11
0.28
164193
M12
1.75
0.13
164182
3/4
1.6
10
0.53
164183
3/4
1.6
10
0.46
164278
M16
2
0.21
164198
7/8
2
9
0.85
164199
7/8
2
9
0.85
164286
M20
2.5
0.38
164200
1
2.5
8
1.1
164186
1
2.5
8
1.1
164291
M24
3
0.83
164202
1 1/4
5
7
2.2
164203
1 1/2
7
6
3.7
Other sizes available.
Other sizes available.
WWW.BULLIVANTS.COM
115
05 - HARDWARE
ORDER CODE
Ensure that eyebolts are not screwed into threaded holes of a different size or type of thread.
RUD Starpoint Eyebolts - Grade 100 - VRS-F: Unit of Measure - Each
RUD Eyebolt - Grade 80 - RS: Unit of Measure - Each
WLL F1 (kg)
WLL F2 (kg)*
C (mm)
D (mm)
RUD Part No.
164445
400
100
12
25
RS-M6
1600
400
18
30
RS-M12
164446
3000
750
21
35
RS-M14
164280
4000
1000
24
35
RS-M16
RUD Part No.
164194
L (mm)
RS-M8 RS-M10
K (mm)
25 25
164264
D (mm)
12 15
WLL F2 (kg)*
200 250
WLL F1 (kg)
800 1000
ORDER CODE
164255
164234
1000
400
25
47
12
VRS-F-M8
164287
6000
1500
30
40
RS-M20
164235
1000
400
25
47
15
VRS-F-M10
164293
8000
2000
36
50
RS-M24
164238
2000
750
30
56
18
VRS-F-M12
164298 12000 3000
45
60
RS-M30
54
90
RS-M36
164243
4000
1500
35
65
24
VRS-F-M16
164303 16000 4000
164245
6000
2300
40
75
30
VRS-F-M20
164307 24000 6000
63
90
RS-M42
164447 32000 8000
68
90
RS-M48
164247
8000
3200
48
90
36
VRS-F-M24
164396 12000 4500
60
112
45
VRS-F-M30
Eyenuts, Lifting Loops & Concrete Lifting Eyes
164397 16000 7000
72
135
54
VRS-F-M36
RUD Weld-On Eye Plates - VRBS: Unit of Measure - Each
164398 24000 9000
82
158
63
VRS-F-M42
164266 32000 12000
94
180
72
VRS-F-M48
RUD Starpoint Eyebolt - UNC Imperial Thread - VRS-F: Unit of Measure - Each
WLL F1 (kg)
WLL F2 (kg)*
D (mm)
K (mm)
L (mm)
RUD Part No.
164236
1000
400
25
47
15
VRS-F 3/8” UNC
164239
2000
750
30
56
18
VRS-F 1/2” UNC
165460
4000
1500
35
63
24
VRS-F 5/8” UNC
165461
6000
2300
40
75
30
VRS-F 3/4” UNC
164391
6000
2300
40
75
32
VRS-F 7/8” UNC
ORDER CODE
WLL (kg)
B (mm)
D (mm)
E (mm)
Weight (kg)
• Starpoint Eye Bolt with locking component (UNC thread) • 360° rotation • *Stamped with F2 WLL ORDER CODE
165462
8000
3200
48
90
36
VRS-F 1” UNC
165041
4000
16
48
135
0.8
VRBS - 4
6700
20
60
170
1.8
VRBS - 6.7
65
195
2.8
VRBS - 10
• Multi-directional loading • Rated capacity can be • Weld-on design LQFUHDVHGLQVSHFL¿F • Forged alloy steel load ring lashing applications ‡5LQJIROGVÀDW RUD Part No.
05 - HARDWARE
• 1 to 32 tonne • Multi-directional threaded design • *Stamped with F2 WLL • Adjusts to direction of pull • Can be used for both axial and angular loading ‡8QLTXHNH\GHVLJQIRUHDV\¿WWLQJ • Available in metric and UNC thread sizes
ORDER CODE
• Can be used for both axial and angular loading • Metric (coarse) threads • Rated for use in both single-part and multi-part lifts • *Stamped with F2 WLL.
164248 12000 4500
60
112
45
VRS-F 1 1/4” UNC
165042
165463 16000 7000
72
135
54
VRS-F 1 1/2” UNC
165043 10000
22
165464 24000 9000
82
158
63
VRS-F 1 3/4” UNC
165044 16000
30
90
266
6.6
VRBS - 16
165045 30000
42
130
375
19
VRBS - 30
165449 50000
70
250
620
85.0
VRBS - 50
165465 32000 12000
116
94
180
72
VRS-F 2” UNC
1300 722 999
Nominal Size (kg)
Grade
C (mm)
H (mm)
T (mm)
164347
300
10.9
34
11
75
VLBG 0.3t M8
164220
630
10.9
34
16
75
VLBG 0.63t M10
164222
1000
10.9
34
21
75
VLBG 1t M12
164399
1500
10.9
36
24
85
VLBG 1.5t M16
164400
2500
10.9
54
32
110
VLBG 2.5t M20
164401
4000
10.9
54
37
125
VLBG 4t M24
164402
4000
10.9
65
39
147
VLBG 4t M27
164403
5000
10.9
65
49
147
VLBG 5t M30
164404
7000
8.8*
65
52
146
VLBG 7t M36
164365
8000
10.9
82
63
197
VLBG 8t M36
164369
10000
10.9
80
73
162
VLBG 10t M42
164405
15000
10.9
100
63
222
VLBG 15t M42
164406
20000
10.9
100
73
222
VLBG 20t M48
05 - HARDWARE
RUD Part No.
ORDER CODE
RUD Uni Directional Ring Bolts - Grade 100: Unit of Measure - Each • 0.3 - 20 tonne • Load ring manufactured from • Omni directional Grade 80 material • Simple mounting with only • Rotates through 360° one hole required • Fully rated for loading in • Compact design any direction • In-built clamping spring secures • Available in metric and ULQJLQÀDWSRVLWLRQ UNC thread sizes • Longer bolts available for all sizes
*Captive bolt: VLBG automatically turns in direction of load
ORDER CODE
Nominal Size (kg)
Grade
C (mm)
H (mm)
T (mm)
RUD Part No.
RUD Ring Bolt with Longer Vario Bolts - VLBG: Unit of Measure - Each
165466
300
10.9
34
60
75
VLBG 0.3 M8 With Vario Bolt (H Max = 60)
165467
630
10.9
34
77
75
VLBG 0.63 M10 With Vario Bolt (H Max = 77)
165468
1000
10.9
34
91
75
VLBG 1 M12 With Vario Bolt (H Max = 91)
421252
1500
10.9
36
116
85
VLBG 1.5 M16 With Vario Bolt (H Max = 116)
421253
2500
10.9
54
152 110
VLBG 2.5 M20 With Vario Bolt (H Max 152)
421254
4000
10.9
54
176 125
VLBG 4 M24 With Vario Bolt (H Max = 176)
165469
5000
10.9
65
213 147
VLBG 5 M30 With Vario Bolt (H Max = 213)
421255
8000
10.9
82
421256 10000 10.9
80
158 197 VLBG 8 M36 With Vario Bolt (H Max = 158) 198 162 VLBG 10 M42 With Vario Bolt (H Max = 198)
165470 15000 10.9 100 188 222 VLBG 15 M42 With Vario Bolt (H Max = 188) 165471 20000 10.9 100 223 222 VLBG 20 M48 With Vario Bolt (H Max = 223)
Nominal Size (kg)
C (mm)
H (mm)
T (mm)
164221
1000
34
22
75
VLBG-Z 1 1/2” UNC
164223
1500
36
24
85
VLBG-Z 1.5 5/8” UNC
164226
2500
54
28
110
VLBG-Z 2.5 3/4” UNC
164353
2500
54
27
110
VLBG-Z 2.5 7/8” UNC
164228
4000
54
41
125
VLBG-Z 4 1” UNC
165482
5000
82
41
147
VLBG-Z 5 1 1/4” UNC
WWW.BULLIVANTS.COM
RUD Part No.
ORDER CODE
RUD Ring Bolt with UNC Bolt (Imperial) - VLBG-Z: Unit of Measure - Each
117
RUD Uni-Directional Variable Length Swivel Lifting Rings Grade 100 - VWBG-V: Unit of Measure - Each
A (mm)
C (mm)
F (mm)
8
29
12
VWBG-V-0.3 M8
450
8
29
15
VWBG-V-O.5 M10
13.5
VLBS-1.5
165472
2500
45
48
13.5
VLBS-2.5
165050
4000
51
52
16.5
VLBS-4
165051
6700
67
73
22.5
VLBS-6.7
165052
10000
67
71
26.5
VLBS-10
165053
16000 100 105 26.5
VLBS - 16
F (mm)
40
E (mm)
38
C (mm)
1500
WLL (kg)
165049
164384
RUD Part No.
WLL (kg)
300
RUD Part No.
ORDER CODE
164407 164378 164379
600
10
35
21
VWBG-V-0.6 M12
164381
1300
10
35
30
VWBG-V-1.3 M16
164408
2000
13
35
33
VWBG-V-2.0 M20
3500
18
40
40
VWBG-V-3.5 M24
164409
5000
22
50
50
VWBG-V-5.0 M30
RUD Heavy-duty Uni-Directional Swivel Lifting Rings Grade 100 - VWBG: Unit of Measure - Each
RUD Weld-On Load Rings with Spring: Unit of Measure - Each
VLBS-1.5 with spring
165474
2500
45
48
13.5
VLBS-2.5 with spring
165475
4000
51
52
16.5
VLBS-4 with spring
165476
6700
67
73
22.5
VLBS-6.7 with spring
165477 10000
67
71
26.5
VLBS-10 with spring
118
RUD Part No.
13.5
F (mm)
RUD Part No.
40
C (mm)
F (mm)
38
A (mm)
E (mm)
1500
WLL (kg)
C (mm)
165473
• 8 - 40 tonne • Designed for loads that need to be turned or rotated • Will rotate 360° under load • Thread size M36 - M90 • Oversized load rings ORDER CODE
WLL (kg)
• With captive position holding spring ORDER CODE
05 - HARDWARE
• 1.5 to 16 tonne • Multi-directional loading • Weld-on design • Forged alloy steel load ring with captive position holding spring ‡5DWHGFDSDFLW\FDQEHLQFUHDVHGLQVSHFL¿F lashing applications • Available with and without internal position holding springs
• 0.3 - 5 tonne • Designed for loads that need to be turned or rotated • Will rotate 360° under load • Thread size M8 - M30 • Oversized load rings • Longer bolts available for all sizes ORDER CODE
RUD Weld-On Load Rings - Grade 100: Unit of Measure - Each
164385
8000
22
50
54
VWBG 8 M36
164386 12000
26
65
63
VWBG 12 M42
164410 13000
26
65
68
VWBG 13 M48
164411 16000
32
70
84
VWBG 16 M56
164412 16000
32
70
94
VWBG 16 M64
164413 40000
46
90
135
VWBG 40 M90
1300 722 999
RUD Metric Course Eyenut - Grade 80 - RM: Unit of Measure - Each
RUD Bolt-On Eye Plates - Grade 80 - RBG/VRBG: Unit of Measure - Each
RM-M6 RM-M8 RM-M10 RM-M12 RM-M14 RM-M16 RM-M20 RM-M24 RM-M30 RM-M36 RM-M42 RM-M48
164426
3200
48
178
M16 x 50
RBG - 3
164427
10000
65
194
M20 x 70 VRBG - 10
164428
16000
90
270
M30 x 90 VRBG - 16
RUD Weld-On Swivelling Eye Connection - WPP-B: Unit of Measure - Each ORDER CODE
WLL (kg)
A (mm)
B (mm)
C (mm)
D (mm)
E (mm)
G (mm)
RUD Part No.
• Non swivelling versions available on request
121900 121024 121901 121902 121903 121904
630 1500 2500 4000 5000 8000
9 11 13 16 21 24
65 65 74 95 130 140
35 35 40 45 60 65
40 46 61 80 95 100
105 115 135 172 223 242
40 50 61 77 93 102
WPP-B 0.63t WPP-B 1.5t WPP-B 2.5t WPP-B 4t WPP-B 5t WPP-B 8t
RUD Weld-On Swivelling Universal Connection - WPP-S: Unit of Measure - Each
ORDER CODE
WLL (kg)
A (mm)
B (mm)
C (mm)
D (mm)
E (mm)
F (mm)
RUD Part No.
• Will rotate 360° under load • Complete with welding instructions • Fixed welded versions also available
121905 121906 121907 121908 121909 121910
630 1500 2500 4000 5000 8000
13 20 28 36 37 49
75 97 126 150 174 208
18 25 30 35 40 48
40 46 61 80 95 100
115 147 187 227 267 310
40 50 61 77 93 102
WPP-S 0.63t WPP-S 1.5t WPP-S 2.5t WPP-S 4t WPP-S 5t WPP-S 8t
WWW.BULLIVANTS.COM
119
05 - HARDWARE
RUD Part No.
25 25 25 30 35 35 40 50 60 90 90 90
RUD Part No.
D (mm)
11 11 11 13 15 15 17 21 26 43 43 43
Bolt
C (mm)
35 35 35 41 48 48 55 70 85 130 130 130
L (mm)
A (mm)
100 200 250 400 750 800 1500 2000 3000 4000 6000 8000
D (mm)
WLL F2 (kg)
400 800 1000 1600 3000 3200 6000 8000 12000 16000 24000 32000
WLL (kg)
WLL F1 (kg)
164414 164415 164416 164417 164418 164419 164420 164421 164422 164423 164424 164425
• 3 to 80 tonne • Multi-directional loading • Bolt-On design • Load ring manufactured from Grade 80 material ‡5LQJIROGVÀDW ‡5DWHGFDSDFLW\FDQEHLQFUHDVHGLQVSHFL¿F lashing applications ORDER CODE
ORDER CODE
• Can be used for both axial and angular loading • Metric (coarse) threads • Rated for use in both single-part and multi-part lifts
ORDER CODE
WLL (kg)
A (mm)
B (mm)
C (mm)
D (mm)
E (mm)
F (mm)
G (mm)
M (mm)
SW (mm)
RUD Part No.
RUD PP-B Bolt-On Swivelling: Unit of Measure - Each
164429
630
9
65
35
40
105
18
41
12
36
PP-B M12
164430
1500
11
65
35
46
115
24
50
16
41
PP-B M16
164431
2500
13
75
40
61
135
30
61
20
55
PP-B M20
164432
4000
16
95
45
78
172
36
78
24
70
PP-B M24
164433
5000
21
130
60
95
223
45
93
30
85
PP-B M30
164434
8000
24
140
65
100 242
54
102
36
90
PP-B M36
RUD PP-S Bolt-On Swivel Universal Connection - Metric: Unit of Measure - Each
ORDER CODE
WLL (kg)
A (mm)
B (mm)
C (mm)
D (mm)
E (mm)
F (mm)
G (mm)
M (mm)
SW (mm)
RUD Part No.
164435
630
3
75
18
40
116
18
41
12
36
PP-S M12
164436
1500
20
9
25
46
147
25
50
16
41
PP-S M16
164437
2500
28
126
30
61
187
30
61
20
55
PP-SM20
164438
4000
36
150
35
78
227
36
77
24
70
PP-S M24
164439
5000
37
174
40
95
267
45
93
30
85
PP-S M30
164440
8000
49
208
48
100 310
54
102
36
90
PP-S M36
RUD ABA Weld-On Lifting Point: Unit of Measure - Each
C (mm)
D (mm)
E (mm)
F (mm)
30
16
100
35
16
57
165479
3200
41
23
137
50
21
80
59
1.1
ABA 3.2t
165480
5000
51
27
172
60
27.5
99
71.5
2.3
ABA 5t
165481 10000
70
38
228
80
35
130
95
5.3
ABA 10t
165483 20000
90
52
272
115
40
175
135 10.7
ABA 20t
165484 31500 108
64
320
130
50
204
154 18.3 ABA 31.5t
120
41.5 0.44
RUD Part No.
B (mm)
1600
Weight (kg)
A (mm)
165478
T (mm)
WLL (kg)
• Manufactured in using high tensile CrNiMo - steel • 100% Electro-magnetic crack detection tested • Complies with DIN 5691 and EN 1677 • 4:1 safety factor on WLL • Temperature Range -40°C to 100°C no reduction in WLL • Full working load in all directions • Patented wear markings on the inside and on the outside ORDER CODE
05 - HARDWARE
• New generation bolt-on lifting system • Quick and easy to mount • Double ball-bearings provide 360° rotation under load • 4:1 safety factor on WLL
ABA 1.6t
1300 722 999
Gunnebo ELP Eye Lifting Point Grade 80: Unit of Measure - Each
ORDER CODE
WLL (tonnes)
B (mm)
D (mm)
G (mm)
H (mm)
L (mm)
M (mm)
Weight (kg)
Gunnebo Part No.
• Suitable for 1 legged slings ‡(\HZLWKÀDWWHQHGVHFWLRQIRUXVHZLWK%HUJORN • Forged in Grade 80 material that permits higher WLL than conventional DIN 580 eyebolts. ‡0DJQDÀX[FUDFNWHVWHG
164279
1.0**
72
16
42
55
24
M16
0.4
ELP-M16-8
165028
1.5 **
72
16
42
57
30
M20
0.5
ELP-M20-8
164292
2.0 **
88
19
48
70
36
M24
0.9
ELP-M24-8
164297
3.0 **
106
22
60
84
45
M30
1.4
ELP-M30-8
165029
4.0 **
127
26
72
100
54
M36
2.3
ELP-M36-8
05 - HARDWARE
** In case of 1-leg application where loading is limited to straight loading in the direction of thread (no bending force) it is possible to use ELP with four times higher WLL Note: Threaded depths need to be at least 1xM for steel, 1.25 x M for cast iron and 2 x M for aluminium alloy.
Gunnebo RLP Rotating Lifting Point Grade 10: Unit of Measure - Each
ORDER CODE
WLL (all directions) tonnes
WLL (straight lift) tonnes
Bolt Size (mm)
B (mm)
D (mm)
G (mm)
H (mm)
L (mm)
Weight (kg)
Gunnebo Part No.
Suitable for applications where a conventional lifting point would not be fully adequate. Intended to be used as a Lifting Point, Lashing Point or Towing attachment. • Dismountable open D-ring. Enables assembly of roundsling, master link, link or hook directly onto the RLP. • Hexagon-headed screw for easy assembly/disassembly by means of ordinary wrench. • Forged in Grade 10 material permits higher WLL than Grade 8 and DIN 580 eyebolts. • For lifting with single or multi-leg slings. • Safety factor 4:1. • RLP can rotate 360° and articulate 180°. • Longer bolt can be supplied on request.
164346**
0.3
0.6
M8
42
12
35
60
15
0.3
RLP M8-10
164349**
0.5
1.0
M10
42
12
34
60
20
0.3
RLP M10-10
164350**
0.75
1.5
M12
57
19
46
85
19
0.9
RLP M12-10
164352**
1.5
3.0
M16
57
19
44
85
24
0.9
RLP M16-10
164354**
2.5
5.0
M20
83
28
56
111
32
2.8
RLP M20-10
164356
3.5
7.0
M24
83
28
53
111
37
2.8
RLP M24-10
165031
6.0
12.0 M30 114
34
69
144
49
7
RLP M30-10
165032
8.0
14.0 M36 114
34
65
144
61
7.3
RLP M36-10
165033
14.0
16.0 M42 149
40
90
185
65
14
RLP M42-10
165034
16.0
20.0 M48 149
40
86
185
75
14.9 RLP M48-10
** Available in UNC thread; 5/16”, 3/8”, 7/16”, 5/8”, 3/4”
WWW.BULLIVANTS.COM
121
Gunnebo SLP Screw-on Lifting Points Grade 80: Unit of Measure - Each
WLL (tonnes)
B (mm)
C (mm)
D (mm)
H (mm)
L (mm)
R (mm)
Weight (kg)
Gunnebo Part No.
165025
1.0
50
72
14
98
55
M14 139
24
0.9
SLP-1T
165026
3.0
58
84
17
114
50
M16 144
29
1.4
SLP-3T
164374
5.0
64
116
22
160
74
M20 203
33
2.9
SLP-5T
T (mm)
M (mm)
ORDER CODE
• For use in applications where welding is not possible. • Forged D-ring and housing in Grade 80 material. ‡'LVPRXQWDEOHÀDWGHVLJQ ‡7HVWORDGHGDQG0DJQDÀX[FUDFNWHVWHG
Gunnebo Weldable Lifting Point type WLP without Spring Grade 8: Unit of Measure - Each
ORDER CODE
WLL (tonnes)
B (mm)
D (mm)
G (mm)
L (mm)
R (mm)
T (mm)
Weight (kg)
Gunnebo Part No.
164174
1.0
50
14
27
53
24
95
0.5
WLP-1T
164175
3.0
58
17
34
48
29
97
0.9
WLP-3T
164230
5.0
64
22
41
73
33
135
1.7
WLP-5T
165002
8.0
60
25
50
68
35
145
24
WLP-8T*
164232
15.0
88
34
65
92
40
190
5.8
WLP-15T*
* Painted red, without spring.
WLL (tonnes)
B (mm)
C (mm)
G (mm)
H (mm)
K (mm)
L (mm)
S(mm)
Weight (kg)
Gunnebo Part No.
Gunnebo Universal Weld-on Hook UKN: Unit of Measure - Each ORDER CODE
05 - HARDWARE
Weld-on lifting point for towing, lashing and lifting applications. • Forged D-ring and housing in Grade 80 material. ‡7HVWORDGDQG0DJQDÀX[FUDFNWHVWHG • Flat design • Can be supplied with or without spring for stay up function.
121307
1.0
20
72
17
25
25
95
6
0.6
UKN-1***
121138
2.0
26
86
20
30
30
114
8
1.0
UKN-2***
121139
3.0
30
105
23
32
35
132
10
1.3
UKN-3
121309
4.0
29
114
29
38
42
140
11
1.9
UKN-4
121310
5.0
34
131
30
47
45
165
12
2.9
UKN-5
121312
8.0
34
133
40
51
50
172
13
3.5
UKN-8
121313
10.0
47
170
43
58
55
220
14
6.4
UKN-10
121928
15.0
53
188
50
67
60
240
15
8.8
UKN-15
If welding on to an excavator or its accessories we recommend that the working load limit is reduced, where necessary, to meet any appropriate legislative requirements. Please Bullivants for further information. ***Welding plate slightly curved
122
1300 722 999
PWB Grade 80 Weld-On Hook: Unit of Measure - Each
WLL (tonnes)
P (mm)
L (mm)
T (mm)
H (mm)
W (mm)
A (mm)
M (mm)
Mass (kg)
PWB Part No..
122555
1
18
70
18
27
95
7
4
0.6
40915Y
122556
2
25
85
20
30
115
8
5
1
40916Y
122557
3
28
107
23
30
133
9
6
1.4
40919Y
122558
4
28
114
30
38
142
10
7
2
40920Y
122559
5
30
135
31
47
167
12
7
3
40917Y
122560
8
32
137
39
52
176
12
8
3.8
40921Y
122561
10
44
170
42
56
222
13
8
6.3
40918Y
*Distributed by PWB Anchor
05 - HARDWARE
ORDER CODE
)RUXVHDVDVSUHDGHUEHDPOLIWLQJDWWDFKPHQWRUIRU¿[HGDQFKRUSRLQW$OORZV for axial loading and positive locking with the safety latch. Welding instructions supplied with each unit.
PWB Grade 80 Weld-On Lifting Point: Unit of Measure - Each ORDER CODE
WLL (tonnes)
W (mm)
K (mm)
R (mm)
L (mm)
Mass (kg)
PWB Part No..
‡'HVLJQHGIRU¿[HGDQFKRURUOLIWLQJSRLQW
122562
1
50
38
24
105
0.5
42285
122563
3
58
48
29
112
0.8
42286
122564
5
64
61
33
154
1.8
42287
122565
8
61
73
34
169
2.6
42288
122566
10
75
73
41
191
3.1
42289
122567
15
91
93
50
234
6.5
42290
*Distributed by PWB Anchor
PWB Grade 80 Bolt-On Tie-Down Point: Unit of Measure - Each
ORDER CODE
WLL (tonnes)
A (mm)
B (mm)
R (mm)
M (mm)
K (mm)
L (mm)
Mass (kg)
PWB Part No..
‡'HVLJQHGIRU¿[HGDQFKRURUWLHGRZQSRLQW • Supplied without bolt assembly.
122568
1
50
72
24
14
98
139
0.8
42277
122569
3
58
84
29
16
114
144
1.1
42278
122570
5
64
116
33
20
160
203
2.5
42279
WWW.BULLIVANTS.COM
*Distributed by PWB Anchor
123
Black Metric Eyenuts: Unit of Measure - Each
ORDER CODE
Size (mm)
Thread Pitch
Net Weight (kg)
164314
M10
1.5
0.12
ORDER CODE
Size (in.)
Thread Pitch
Net Weight (kg)
BSW Thread Eyenut: Unit of Measure - Each
164316
M12
1.75
0.18
164320
5/8
11
0.3
164321
M16
2
0.3
164328
1
8
1.20
164207
M20
2.5
0.57
3/8” to 3” available
Other sizes available.
Net Weight (kg)
0.1
164317
M12
1.75
0.15
164206
M16
2
0.24
Weight (kg)
Thread Pitch
1.5
Thread Pitch
Size (mm)
M10
Nom. Size (mm)
ORDER CODE
164315
164173
24
3
1.28
20mm & 45mm also available Concrete Lifting Eye: Unit of Measure - Each
Other sizes available.
Size (in.)
Thread Pitch
Net Weight (kg)
ORDER CODE
WLL (tonnes)
UNC Thread Eyenut: Unit of Measure - Each
ORDER CODE
05 - HARDWARE
Not approved for lifting applications.
ORDER CODE
Forged Lifting Loop: Unit of Measure - Each
Zinc Metric Eyenuts: Unit of Measure - Each
633121
1.3
164319
1/2”
13
0.18
633122
3/8” to 3” available
124
2.5
633131
5
1300 722 999
WELD ON LIFTING POINT Bullivants BlueLink Weld On Lifting Point: Unit of Measure - Each Features: • Australian made • Forged D-ring and housing in Grade 100 material • Flat design ‡7HVWORDGDQGPDJQDÀX[WHVWORDGHG • Multi directional loading
05 - HARDWARE
‡5DWHGFDSDFLW\FDQEHLQFUHDVHGLQVSHFL¿F lashing applications
ORDER CODE
Working Load Limits (in tonnes) for symmetrical loading
2, 3 or 4 Point Single Point WLL (tonne)
Maximum Included Angle 60°
90°
120°
165451
2.0
3.4
2.8
2.0
164453
4.0
6.9
5.6
4.0
165452
6.7
11.6
9.5
6.7
WARNING - NEVER EXCEED THE WORKING LOAD LIMIT (WLL).
1300 722 999 www.bullivants.com
MANUFACTURED IN AUSTRALIA USING ONLY HEAT CERTIFIED AUSTRALIAN STEEL.
125
Rigging Screws & Turnbuckles Types of Turnbuckles and Rigging Screws Grade L Rigging Screws & Turnbuckles must comply with AS2319. In accordance with AS2319 turnbuckles and rigging screws VKRXOGEHPDUNHGZLWKPDQXIDFWXUHUVLGHQWL¿FDWLRQQRPLQDOVL]HZKHUHWKHTXDOLW\RIWKHJUDGHLVRWKHUWKDQ/WKHTXDOLW\RI JUDGHVKDOOEHPDUNHGRQWKHHQG¿WWLQJ://LQWRQQHVLGHQWL¿FDWLRQPDUNLQJWRFRUUHODWHWKHULJJLQJVFUHZRUWXUQEXFNOHWRWKH WHVWFHUWL¿FDWH Commercial Grade Turnbuckles are not to be used for lifting purposes. Commercial Grade Turnbuckles are not made to any standard. Usually used for tensioning or ing light loads. Care & Use • Ensure the WLL suits the application. • Markings can be clearly read. ‡7KHERG\DQG¿WWLQJRIWKHULJJLQJVFUHZRUWXUQEXFNOHLVQRWGLVWRUWHG • Conduct a visual inspection for nicks, gouges, cracks and corrosion. • Conduct a visual inspection for damaged screw threads. • Care should be taken to ensure that rigging screws and turnbuckles are not excessively tightened. Turnbuckles and rigging screws should be inspected periodically by a competent person as per AS2319 Rigging Screws are used to provide a means for length adjustment and for tensioning. They are also used with guys for masts, towers and other structures and engineering applications. 5LJJLQJ6FUHZVJHQHUDOO\KDYHHORQJDWHGH\HVRUFOHYLVHQG¿WWLQJVIRUFRQQHFWLRQWRVKDFNOHVZLUHURSHDVVHPEOLHVSDGH\HV and the like. An observation hole is provided at the inner end of the thread, at each end of the body, which permits visual observation of the PD[LPXPSHUPLWWHGH[WHQGHGSRVLWLRQRIWKHHQG¿WWLQJ Additionally, rigging screws have the innate facility for continuing lubrication as the enclosed section of the body provides a suitable reservoir for grease or other lubrication. Hence, they have an advantage in relative corrosive applications such as ship’s rigging and permanent outdoor guys. Rigging screws are not designed for continuous adjustment under rated load conditions. Turnbuckles Turnbuckles have the same applications as rigging screws, but generally have smaller size range and shorter adjustment. 7KHPDLQEHQH¿WRIDWXUQEXFNOHLVWKDWLWPD\KDYHDJUHDWHUDELOLW\WREHWLJKWHQHGXQGHUORDG$OVRWKHUHPD\EHDZLGHUVFRSH for providing means for locking while in service. Turnbuckles are not designed for continuous adjustment under rated load.
Grade L Rigging Screws ORDER CODE
Size (mm)
A (mm) Closed
A (mm) Open
C (mm)
D (mm)
E (mm)
F (mm)
K (mm)
WLL (tonnes)
Weight (kg)
Grade L Rigging Screw - Clevis & Clevis (Jaw & Jaw): Unit of Measure - Each
160063
12
340
525
15
35
8.5
230
10
0.5
0.97
160068
16
360
535
20
40
9
230
12
0.75
1.36
160070
20
390
555
22
46
10.5
230
16
1.25
2.35
160075
24
555
740
30
58
13
360
20
2.5
4.2
Other sizes available.
Size (mm)
A (mm) Closed
A (mm) Open
E (mm)
F (mm)
G (mm)
H (mm)
J (mm)
WLL (tonnes)
Weight (kg)
Grade L Rigging Screw - Eye & Eye: Unit of Measure - Each ORDER CODE
05 - HARDWARE
Rigging Screws
160046
16
350
525
9
230
17
36
12
0.75
1.09
160047
20
380
545
10.5
230
21
42
12
1.25
1.72
160072
24
540
725
13
360
25
51
17
2.5
3.2
Other sizes available.
126
1300 722 999
Grade P Rigging Screws ORDER CODE
Size (mm)
A (mm) Closed
A (mm) Open
C (mm)
D (mm)
E (mm)
F (mm)
K (mm)
WLL (tonnes)
Weight (kg)
Grade P Rigging Screws - Clevis & Clevis (Jaw & Jaw): Unit of Measure - Each
160064
12
340
525
15
35
8.5
230
10
1.00
0.97
160069
16
360
535
20
40
9.0
230
12
1.60
1.36
160071
20
390
555
22
46
10.5
230
16
2.50
2.35
165005
24
555
740
30
58
13.0
360
20
4.00
5.20
160079
M33
628
904
38
75
14.0
380
24
8.00 11.20
Other sizes available.
Size (mm)
A (mm) Closed
A (mm) Open
E (mm)
F (mm)
G (mm)
H (mm)
J (mm)
WLL (tonnes)
Weight (kg)
160675
16
350
525
9.0
230
17
36
12
1.60
1.09
160048
20
380
545
10.5
230
21
42
12
2.50
1.72
165006
24
540
725
13.0
360
25
51
17
4.00
3.20
160785
M33
660
936
14.0
380
33
70
24
8.00
9.11
05 - HARDWARE
ORDER CODE
Grade P Rigging Screws - Eye & Eye: Unit of Measure - Each
Other sizes available.
Grade L Turnbuckles ORDER CODE
Size (mm)
A (mm) Closed
A (mm) Open
B (mm)
C (mm)
D (mm)
F (mm)
K (mm)
WLL (tonnes)
Weight (kg)
Grade L Turnbuckles - Clevis & Clevis (Jaw & Jaw): Unit of Measure - Each
160875
10
240
350
30
14
30
150.0
10
0.30
0.50
160099
12
335
470
36
15
35
190.5
10
0.50
0.84
160053
16
355
490
45
20
40
204.0
12
0.75
1.53
160114
20
440
520
46
22
46
216.5
16
1.25
2.79
160123
24
450
585
59
30
58
232.0
20
2.50
4.57
Other sizes available.
ORDER CODE
Size (mm)
A (mm) Closed
A (mm) Open
F (mm)
G (mm)
H (mm)
J (mm)
WLL (tonnes)
Weight (kg)
Grade L Turnbuckles - Eye & Eye: Unit of Measure - Each
160093
10
230
335
150.0
11
21
7
0.30
0.35
160094
12
330
470
190.5
15
30
9
0.50
0.67
160102
16
350
485
204.0
17
36
12
0.75
1.55
160111
20
385
515
216.5
21
42
14
1.25
2.16
160119
24
440
570
232.0
25
51
17
2.50
3.20
Other sizes available.
WWW.BULLIVANTS.COM
127
A (mm) Closed
A (mm) Open
B (mm)
C (mm)
D (mm)
F (mm)
G (mm)
H (mm)
J (mm)
K (mm)
10
235
340
30
14
30
150.0
11
21
7
10
0.30 0.30
160097
12
330
470
36
15
35
190.5
15
30
9
10
0.50 0.50
165012
16
355
490
45
20
40
204.0
17
36
12
12
0.75 0.75
160055
20
390
520
55
22
46
215.5
21
42
14
16
1.25 1.25
160121
24
445
580
59
30
58
232.0
25
51
17
20
2.50 2.50
Weight (kg)
Size (mm)
165011
WLL (tonnes)
ORDER CODE
Grade L Turnbuckles - Clevis (Jaw) & Eye: Unit of Measure - Each
Other sizes available.
Grade P Turnbuckles ORDER CODE
Size (mm)
A (mm) Closed
A (mm) Open
B (mm)
C (mm)
D (mm)
F (mm)
K (mm)
WLL (tonnes)
Weight (kg)
160050
12
335
470
36
15
35
190.5
10
1.00
0.84
160105
16
355
490
45
20
40
204.0
12
1.60
1.60
160115
20
440
520
46
22
46
216.5
16
2.50
2.80
160124
24
450
585
59
30
58
232.0
20
4.00
4.57
160876
M33
630
780
78
38
76
252.0
24
8.00
8.00
Other sizes available.
ORDER CODE
Size (mm)
A (mm) Closed
A (mm) Open
F (mm)
G (mm)
H (mm)
J (mm)
WLL (tonnes)
Weight (kg)
Grade P Turnbuckles - Eye & Eye: Unit of Measure - Each
160103
16
350
485
204.0
17
36
12
1.60
1.50
160112
20
385
515
216.5
21
42
14
2.50
2.16
160120
24
440
570
232.0
25
51
17
4.00
3.50
160877
M33
656
806
252.0
33
70
24
8.00
6.50
Other sizes available.
A (mm) Open
B (mm)
C (mm)
D (mm)
F (mm)
G (mm)
H (mm)
J (mm)
K (mm)
12
330
470
36
15
35
190.5
15
30
9
10
1.00 0.70
160113
20
390
520
55
22
46
215.5
21
42
14
16
2.50 2.50
160122
24
445
580
59
30
58
232.0
25
51
17
20
4.00 4.00
643
793
78
38
76
252.0
33
70
24
24
8.00 7.50
160878 M33
Weight (kg)
A (mm) Closed
160098
WLL (tonnes)
Size (mm)
Grade P Turnbuckles - Clevis (Jaw) & Eye: Unit of Measure - Each ORDER CODE
05 - HARDWARE
Grade P Turnbuckles - Clevis & Clevis (Jaw & Jaw): Unit of Measure - Each
Other sizes available.
128
1300 722 999
Weight (kg)
ORDER CODE
Size (mm)
Style
Weight (kg)
Not approved for lifting applications.
Style
Not approved for lifting applications.
Size (mm)
Commercial Grade Hook & Eye Turnbuckles: Unit of Measure - Each
ORDER CODE
Commercial Grade Eye & Eye Turnbuckles: Unit of Measure - Each
160153
5
Eye & Eye
0.02
160158
5
Hook & Eye
0.02
160154
6
Eye & Eye
0.16
160144
6
Hook & Eye
0.16
160148
8
Eye & Eye
0.24
160145
8
Hook & Eye
0.24
160149
10
Eye & Eye
0.36
160146
10
Hook & Eye
0.36
160150
12
Eye & Eye
0.64
160147
12
Hook & Eye
0.64
160151
16
Eye & Eye
1.44
160152
16
Hook & Eye
1.44
160155
20
Eye & Eye
2.55
160156
20
Hook & Eye
2.55
160160
22
Eye & Eye
3.53
160161
22
Hook & Eye
3.53
160163
25
Eye & Eye
4.34
160157
25
Hook & Eye
4.34
05 - HARDWARE
Commercial Grade Turnbuckles
6XSHUEXFNOHV86)HG6SHFLÀFDWLRQV))7% • Hot dip galvanised steel. ‡(QG¿WWLQJVDUHTXHQFKHGDQGWHPSHUHGERGLHVKHDWWUHDWHGE\QRUPDOL]LQJ • Turnbuckles recommended for straight on in-line pull only. ‡0HHWVWKHSHUIRUPDQFHUHTXLUHPHQWVRI)HGHUDO6SHFL¿FDWLRQV))7% Type 1, Form 1 - Class 7, except those provisions required by the contractor. • Proof load is 2.5 times the WLL. Ultimate load is 5 times the WLL.
ORDER CODE
Thread Dia. & Take up (in.)
Thread Dia. & Take up (mm)
WLL (tonnes)
Style
A (mm)
B (mm)
E (mm)
G (mm)
J (mm)
K (mm)
M (mm)
N (mm)
BB (mm)
Weight (kg)
Superbuckles - Clevis & Clevis (Jaw & Jaw): Unit of Measure - Each
165007
3/8 x 6
9.53 x 152
0.54
Jaw & Jaw
9.65
13.7
54
22.1
410
258
441
289
152
0.37
160051
1/2 x 12
12.7 x 305
1.00
Jaw & Jaw 12.70
16.5
70
26.9
775
445
813
483
305
1.09
160052
5/8 x 12
15.9 x 305
1.59
Jaw & Jaw 16.00
20.1
89
33.3
814
478
867
530
305
1.77
160054
3/4 x 12
19.1 x 305
2.36
Jaw & Jaw 19.10
23.9
106
38.1
851
508
917
574
305
2.98
160109
3/4 x 18
19.1 x 457
2.36
Jaw & Jaw 19.10
23.9
106
38.1
1156
660
1222
726
457
3.64
160057
7/8 x 12
22.2 x 305
3.27
Jaw & Jaw 22.40
28.7
123
44.5
892
543
967
618
305
3.71
160128
1 x 12
25.4 x 305
4.54
Jaw & Jaw 25.40
34.0
140
52.5
933
577
1018
662
305
5.53
160135
1-1/4 x 18
31.8 x 457
6.89
Jaw & Jaw 31.80
44.5
183
71.5
1317
796
1423
903
457
11.2
160143
1-1/2 x 18
38.1 x 457
9.71
Jaw & Jaw 38.10
52.3
200
71.5
1359
826
1486
953
457
16.7
160139
2 x 24
51.0 x 610
16.80
Jaw & Jaw 51.00
66.5
301
93.5
1766
1157
1949 1339
610
42.8
160140
2-1/2 x 24
63.5 x 610
27.20
Jaw & Jaw
76.5
344
113.0 1854 1244 2087 1478
610
75
63.5
Other sizes available.
WWW.BULLIVANTS.COM
129
ORDER CODE
Thread Dia. & Take up (in.)
Thread Dia. & Take up (mm)
WLL (tonnes)
Style
A (mm)
J (mm)
K (mm)
M (mm)
N (mm)
R (mm)
S (mm)
X Closed (mm)
BB (mm)
Weight (kg)
Superbuckles - Eye & Eye: Unit of Measure - Each
160108
3/4 x 12
19.1 x 305
2.3
Eye & Eye
19.1
911
568
943
600
53
25.4
119
304
2.49
160056
7/8 x 12
22.2 x 305
3.27
Eye & Eye
22.4
942
592
980
630
60.4
31.7
130
304
3.27
160130
1-1/4 x 12
31.8 x 305
6.89
Eye & Eye
31.8
1087
719
1145
776
90.5
46
196
304
8.62
Other sizes available.
E Closed (mm)
G (mm)
J Open (mm)
K Closed (mm)
M Open (mm)
N Closed (mm)
Jaw & Eye
16.0 20.1
89
33.3
838
501
877
541
160058
1-3/4 x 18
44.5 x 457
12.7
Jaw & Eye
44.5
66
239
86
1407
949
165010
1-3/4 x 24
44.5 x 610
12.7
Jaw & Eye
44.5
66
239
86
1711
1102
99
304
1.64
1518 1061
117
60.4
254
457
24.4
1823 1214
117
60.4
254
609
27.5
S (mm)
44.4 22.3
R (mm)
Weight (kg)
Style
1.59
BB (mm)
WLL (tonnes)
15.9 x 305
X Closed (mm)
Thread Dia. & Take up (mm)
5/8 x 12
B (mm)
Thread Dia. & Take up (in.)
165009
A (mm)
ORDER CODE
05 - HARDWARE
Superbuckles - Clevis (Jaw) & Eye: Unit of Measure - Each
Other sizes available
130
1300 722 999
Wire Rope Terminations Wedge Sockets Wedge - type sockets are used in lifting, pulling, tensioning and staying systems as a simple mechanical connection to steel wire ropes, especially where steel wire ropes may require shortening. One end of the wedge type socket is able to clamp a rope with a ZHGJLQJDFWLRQDQGWKHRWKHUHQGLVDEOHWRFRQQHFWWRDQRWKHU¿WWLQJRUDQFKRUDJH The wedge - type socket is designed for use on wire ropes up to and including 1770 grade wire with a wire rope core, however higher grade wire rope may be used, provided it meets the intent of this Standard. Metal or Spelter Sockets - Open and Closed The load is transferred between the rope and the socket forging or casting by means of adhesion between the rope wires and the metal or resin used in the socket bowl and subsequent wedging action provided by the bond between the rope’s wires and the metal or resin in the socket. Care should be taken to follow the correct socketing procedure. Properly applied poured socket attachments will withstand the actual breaking force of the wire rope.
Sockets
(in.)
160720
6
1/4
0.24
160721
8
5-16
0.51
160722
9-10
3/8
0.59
160723
11-12
7/16
0.94
160724
13
1/2
0.94
160725
14
9/16
2.12
160418
16
5/8
2.05
160403
18-20
3/4
3.62
160406
22
7/8
5.23
160726
24-26
1
8.07
160727
28
1-1/8
11.5
160728
32
1-1/4
16.1
160729
34-36
1-3/8
19.8
160730
38-40
1-1/2
26.5
160731
44
1-3/4
40.3
160732
48-52
2
66
WWW.BULLIVANTS.COM
Rope Size*
Weight Each (kg)
(mm)
• Forged from special bar quality carbon steel, suitable for cold forming. ‡6ZDJH6RFNHWWHUPLQDWLRQVKDYHDQHI¿FLHQF\UDWLQJRI 100% based on the catalogue strength of wire rope. • Hardness controlled by spheroidize annealing. ‡6WDPSIRULGHQWL¿FDWLRQDIWHUVZDJLQJZLWKRXWFRQFHUQIRU fractures (as per directions in National Swaging Brochure). • U.S. Patent 5,152,630 and foreign equivalents. ORDER CODE
Rope Size*
Weight Each (kg)
ORDER CODE
• Forged from special bar quality carbon steel, suitable for cold forming. ‡6ZDJH6RFNHWWHUPLQDWLRQVKDYHDQHI¿FLHQF\UDWLQJRI 100% based on the catalogue strength of wire rope. • Hardness controlled by spheroidize annealing. ‡6WDPSIRULGHQWL¿FDWLRQDIWHUVZDJLQJZLWKRXWFRQFHUQIRU fractures (as per directions in National Swaging Brochure). • U.S. Patent 5,152,630 and foreign equivalents.
(mm)
(in.)
160733
6
1/4
0.15
160734
8
5/16
0.34
160735
9-10
3/8
0.33
160736
11-12
7/16
0.64
160737
13
1/2
0.64
160738
14
9/16
1.32
160739
16
5/8
1.29
160740
18-20
3/4
2.27
160741
22
7/8
3.08
160742
24-26
1
4.72
160678
28
1-1/8
6.72
160743
32
1-1/4
9.78
160744
34-36
1-3/8
12.9
160398
38-40
1-1/2
17.3
160399
44
1-3/4
23.1
160677
48-52
2
40.5
131
05 - HARDWARE
Crosby S-501 Open Swage Sockets: Unit of Measure - Each Crosby S-502 Closed Swage Sockets: Unit of Measure - Each
Crosby G-416 Open Spelter Sockets: Unit of Measure - Each
Crosby G-417 Closed Speltor Sockets: Unit of Measure - Each
(mm)
(in.)
Structural Strand Dia.(mm)
Ultimate Load (t)
Weight Each (kg)
Ultimate Load (t)
ORDER CODE
(in.)
Structural Strand Dia. (mm)
Weight Each (kg)
(mm)
160745
6-7
1/4
-
4.50
0.50
160757
6-7
1/4
-
4.50
116
160746
8-10
5/16 - 3/8
-
12.0
0.59
160465
8 - 10
5/16 - 3/8
-
12.0
0.34
160478
11-13
7/16 - 1/2
-
20.0
1.02
160466
11 - 13
7/16 - 1/2
-
20.0
0.68
160480
14-16
9/16 - 5/8
12-13
27.0
1.63
160758
14 - 16
9/16 - 5/8
12-13
30.8
1.13
160747
18
3/4
14-16
43.0
2.64
160467
18
3/4
14-16
43.5
1.92
160487
20-22
7/8
18-19
55.0
4.38
160759
20 - 22
7/8
18-19
65.3
3.28
160748
24-26
1
20-22
78.0
7.03
160760
24 - 26
1
20-22
81.6
4.76
160492
28-30
1 - 1/8
24-26
92.0
9.75
160761
28 - 30
1 - 1/8
24-26
100
6.46
160495
32-35
1 - 1/4 - 1-3/8
28
136
14.1
160762
32 - 35
1 - 1/4 - 1 - 3/8
28
136
8.95
160749
38
1 - 1/2
30-32
170
21.4
160763
38
1 - 1/2
30-32
170
13.24
160750 *40 - 42
* 1 - 5/8
33-35
188
24.9
160764 †40 - 42
†1 - 5/8
33-35
188
16.32
160751 *44 - 48
*1 - 3/4 - 1-7/8
36-40
268
37.2
160765 †44 - 48 †1 - 3/4 - 1 - 7/8 36-40
268
25.96
160752 *50 - 54
*2 - 2 - 1/8
42-45
291
59
160766 †50 - 54
42-45
309
35.83
160753 *56 - 60 *2 - 1/4 - 2 - 3/8 46-48
360
76
160767 †56 - 60 †2 - 1/4 - 2 - 3/8 46-48
360
47.62
160754 * 64 - 67 *2 - 1/2 - 2-5/8
50-54
424
114
160768 †64 - 67 †2 - 1/2 - 2 - 5/8 50-54
424
63.50
160755 *70 - 73 *2 - 3/4 - 2 - 7/8 56-62
511
143
160769 †70 - 73 †2 - 3/4 - 2 - 7/8 56-62
549
99.79
160756 *75 - 80
563
172
160770 †75 - 80
656
125
ORDER CODE
05 - HARDWARE
• Forged Steel Sockets thru 38 mm, cast alloy steel • Forged Steel Sockets thru 38 mm, cast alloy steel 40mm - 102mm. 40mm - 100mm. ‡6SHOWHUVRFNHWWHUPLQDWLRQVKDYHDQHI¿FLHQF\UDWLQJ ‡6SHOWHUVRFNHWWHUPLQDWLRQVKDYHDQHI¿FLHQF\UDWLQJ of 100%, based on the catalogue strength of wire rope. of 100%, based on the catalogue strength of wire rope. Ratings are based on recommended use with 6 x 7, 6 x 19, Ratings are based on the recommended use with 6 x 7, or 6 x 37, IPS or XIP (EIP), XXIP (EEIP), RRL, FC, or IWRC 6 x 19 or 6 x 37, IPS or XIP (EIP) , XXIP (EEIP), RRL, wire rope. FC or IWRC wire rope.
132
Rope Dia.
*3 - 3 - 1/8
64-67
Rope Dia.
†2 - 2 - 1/8
†3 - 3 - 1/8
64-67
1300 722 999
ORDER CODE
160443
Wire Rope Dia.
(mm)
(in.)
9 - 10
3/8
160879 Self Colour
6-7
1/4
12
0.2
46812
160880 Self Colour
8
5/16
18
0.7
46813
160881 Self Colour
9-10
3/8
18
0.6
46814
160882 Self Colour 11-12
7/16
23
1.2
46818
160883 Self Colour
½
23
0.9
46819
160884 Self Colour 14-15
13
9/16
30
2.1
46820
160885 Self Colour
5/8
30
2.1
46821
160886 Self Colour 18-20
¾
36
3.8
46822
160887 Self Colour 22-23
7/8
40
5.4
46823
160387 Self Colour 24-25
1
46
8.8
46824
16
160888 Self Colour
28
1-1/8
52
12.6
46826
160889 Self Colour
32
1-1/4
59
17.2
46827
160890 Self Colour
36
1-3/8
65
20.8
46828
160891 Self Colour
38
1-1/2
72
26.5
46829
160892 Self Colour
45
1-3/4
78
40.3
43830
160893 Self Colour
50
2
91
66.4
46831
160894 Galvanised
6-7
1/4
12
0.2
46796
160895 Galvanised
8
5/16
18
0.7
46797
160896 Galvanised
9-10
3/8
18
0.6
46798
160897 Galvanised 11-12
7/16
23
1.2
46799
½
23
0.9
46800
160899 Galvanised 14-15
9/16
30
2.1
46801
160900 Galvanised
5/8
30
2.1
46802
160901 Galvanised 18-20
¾
36
3.8
46803
160902 Galvanised 22-23
7/8
40
5.4
46804
160898 Galvanised
13 16
160446
11 - 13
1/2
160449
14 - 16
5/8
160451
18 - 19
3/4
1
46
8.8
46805
160771
20 - 22
7/8
160904 Galvanised
28
1-1/8
52
12.6
46806
160463
24 - 26
1
160905 Galvanised
32
1-1/4
59
17.2
46807
160772
28
1-1/8
160906 Galvanised
36
1-3/8
65
20.8
46808
160773
30 - 32
1-1/4
160907 Galvanised
38
1-1/2
72
26.5
46809
160908 Galvanised
45
1-3/4
78
40.3
46810
160909 Galvanised
50
2
91
66.4
46811
WWW.BULLIVANTS.COM
160903 Galvanised 24-25
133
05 - HARDWARE
(in.)
PWB Part No.
(mm)
Net Weight (kg)
Rope Size
Max After Swage (mm)
*Distributed by PWB Anchor • Forged from special bar quality carbon steel with superior hardness controlled by spheroidize annealing. • When correctly assembled Swage socket terminations KDYHDQHI¿FLHQF\UDWLQJRIEDVHGRQWKHFDWDORJXH strength of wire rope. • Recommended for use with 6 x 19, 6 x 37 and IWRC wire rope and are approved for use with galvanized bridge rope. • All slings swaged with sockets shall be proof loaded in accordance with AS1666.1/2009 1275HFRPPHQGHGIRUXVHRQ¿EUHFRUHRIODQJOD\URSH
Finish
‡:HGJHVRFNHWWHUPLQDWLRQVKDYHDQHI¿FLHQF\UDWLQJRI 80% based on the catalogue strength of XXIP wire rope. • Crosby products meet or exceed all requirements of $60(%LQFOXGLQJLGHQWL¿FDWLRQGXFWLOLW\GHVLJQ factor, proof load and temperature requirements. Importantly, Crosby products meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26. ‡7\SH$SSURYDODQGFHUWL¿FDWLRQLQDFFRUGDQFHZLWK ABS 2006 Steel Vessel Rules 1-1-17.7, and ABS Guide IRU&HUWL¿FDWLRQRI&UDQHV • Individually magnetic particle inspected. • Pin diameter and jaw opening allows wedge and socket to be used in conjunction with closed swage and spelter sockets. • Secures the tail or “dead end” of the wire rope to the wedge, thus eliminates loss or “Punch out” of the wedge. • Eliminates the need for an extra piece of rope, and is easily installed. • The TERMINATOR™ wedge eliminates the potential breaking off of the tail due to fatigue. • The tail, which is secured by the base of the clip and the wedge, is left undeformed and available for reuse. • Utilises standard Crosby Red-U-Bolt® wire rope clip. • The 9-10mm thru 30-32mm standard S-421 wedge VRFNHWFDQEHUHWUR¿WWHGZLWKWKHQHZVW\OH7(50,1$725Œ wedge. • Available with Bolt, Nut, and Cotter Pin. • U.S. patent 5,553,360, Canada patent 2,217,004 and foreign equivalents.
PWB Forged Open Swage Socket, with Round Pin: Unit of Measure - Each
ORDER CODE
Crosby S-421T Terminator Wedge Sockets: Unit of Measure - Each
PWB Forged Closed Swage Wire Rope Socket (Self Colour): Unit of Measure - Each
(mm)
(in.)
Max After Swage (mm)
Net Weight (kg)
PWB Part No.
160910
6-7
1/4
12
0.2
46832
160911
8
5/16
18
0.3
46833
160912
9-10
3/8
18
0.3
46834
160913
11-12
7/16
23
0.7
46835
160914
13
1/2
23
0.6
46836
160915
14-15
9/16
30
1.4
46837
160916
16
5/8
30
1.3
46838
160917
18-20
3/4
36
2.2
46839
160394
22-23
7/8
39
3.1
46840
160918
24-25
1
46
4.8
46841
160919
28
1-1/8
52
6.7
46842
160920
32
1-1/4
58
10.1
46843
160921
36
1-3/8
65
12.9
46844
160922
38
1-1/2
71
16.9
46845
160923
45
1-3/4
78
24.3
46846
160924
50
2
90
40.5
46847
Rope Size
*Distributed by PWB Anchor
PWB Forged Closed Spelter Wire Rope Socket (Self Colour): Unit of Measure - Each • Forged from special bar quality carbon steel with superior hardness controlled by spheroidize annealing. ‡:KHQFRUUHFWO\DVVHPEOHG6ZDJHVRFNHWWHUPLQDWLRQVKDYHDQHI¿FLHQF\ rating of 100% based on the catalogue strength of wire rope. • Socket size 1/4” thru 3/4” use one groove, 7/8” thru 1-1/2” use 2 grooves • In accordance with AS1666.1/2009 all assembly slings with poured Spellter Sockets, shall be proof loaded
(mm)
(in.)
(mm)
(in.)
Net Weight (kg)
PWB Part No.
ORDER CODE
05 - HARDWARE
ORDER CODE
• Forged from special bar quality carbon steel with superior hardness controlled by spheroidize annealing. ‡:KHQFRUUHFWO\DVVHPEOHG6ZDJHVRFNHWWHUPLQDWLRQVKDYHDQHI¿FLHQF\ rating of 100% based on the catalogue strength of wire rope. • Recommended for use with 6 x 19, 6 x 37 and IWRC wire rope and are approved for use with galvanized bridge rope. • All slings swaged with sockets shall be proof loaded in accordance with AS1666.1/2009 1275HFRPPHQGHGIRUXVHRQ¿EUHFRUHRIODQJOD\URSH
160925
6-7
1/4
-
-
0.3
46770
160926
8-10
5/16-3/8
-
-
0.4
46771
160927
11-13
7/16-1/2
-
-
1.5
46772
160928
14-16
9/16-5/8
13
1/2
2.6
46773
160929
18-20
3/4
14-16
9/16-5/8
4.3
46774
160930
22-23
7/8
18-20
1 1/16 – 3/4
7.9
46775
160932
28-30
1 1/8
24-25
15/16-1
15.2
46780
160933
32-35
1 ¼-1 3/8
26-28
1 1/16- 1 1/8
22.7
46781
160934
36-39
1 1/2
30-32
1 3/16 – 1 1/4
30.9
46782
134
Rope Size
Structural Strand Dia.
*Distributed by PWB Anchor
1300 722 999
PWB Forged Open Spelter Wire Rope Socket, with round pin: Unit of Measure - Each
(in.)
(mm)
(in.)
PWB Part No.
160935
6-7
1/4
-
-
0.5
46783
160936
8-10
5/16-3/8
-
-
0.6
46785
160937
11-13
7/16-1/2
-
-
1.1
46786
160938
14-16
9/16-5/8
13
1/2
1.7
46787
160939
18-20
3/4
14-16
9/16-5/8
2.6
46788
160940
22-23
7/8
18-20
11/16-3/4
4.7
46789
160941
24-26
1
22-23
13/16-7/8
7.4
46791
160942
28-30
1 1/8
24-25
15/16-1
10.0
46793
160943
32-35
1 1/4-1 3/8
26-28
1 1/16-1 1/8
14.9
46794
160944
36-39
1 1/2
30-32
1 3/16-1 1/4
20.8
46795
Rope Size
Structural Strand Dia.
*Distributed by PWB Anchor
05 - HARDWARE
(mm)
Net Weight (kg)
ORDER CODE
• Forged from special bar quality carbon steel with superior hardness controlled by spheroidize annealing. ‡:KHQFRUUHFWO\DVVHPEOHG6ZDJHVRFNHWWHUPLQDWLRQVKDYHDQHI¿FLHQF\ rating of 100% based on the catalogue strength of wire rope. • Socket size 1/4” thru 3/4” use one groove, 7/8” thru 1-1/2” use 2 grooves • In accordance with AS 1666.1/2009 all assembly slings with poured Spelter Sockets, shall be proof loaded
ORDER CODE
Rope Size (in.)
Max After Swage Dim. (in.)
Net Weight (Lbs)
PWB Part No.
PWB Steel Swage Sleeve (Zinc Plated): Unit of Measure - Each
164465
¼
0.57
0.05
46848
164466
5/16
0.75
0.14
46849
164467
3/8
0.75
0.14
46850
164468
7/16
1.01
0.3
46851
164469
½
1.01
0.4
46852
164470
5/8
1.24
0.6
46854
164471
¾
1.46
0.9
46855
164472
7/8
1.68
1.3
46856
164473
1
1.93
2.0
46857
164474
1-1/8
2.13
2.6
46858
164475
1-1/4
1.32
3.6
46859
164476
1-3/8
2.52
4.2
46860
164477
1-1/2
2.71
5.0
46861
164478
1-3/4
3.10
8.0
46862
164479
2
3.56
11.3
46863
164480
2-1/4
4.12
19.4
46864
164481
2-1/2
4.50
23.5
46865
164482
2-3/4
4.70
28.0
46866
164483
3
4.96
29.4
46867
164484
3-1/2
5.77
46.4
46868
164485
3-3/4
6.23
55.0
46869
164486
4
6.69
68.0
46870
WWW.BULLIVANTS.COM
*Distributed by PWB Anchor
135
Wire Rope Grips
Thimbles
Wire Rope Grips AS2076: Unit of Measure - Each
Thimbles are used at the ends of wire rope to reinforce the eye and obviate damage and wear to the wire rope from any connected lifting tackle or other connection. Types of Thimbles
10
M10
49
27
10
0.12
160004
12
M12
59
32
12
0.21
160010 13-14
M14
70
38
14
0.23
160005
16
M14
77
41
14
0.48
160011
18-19
M16
89
47
16
0.53
160007
22
M20
108
58
20
0.58
160008
26
M20
117
61
20
1.12
160012
28
M22
127
66
22
1.41
160013
32
M22
136
70
22
2.07
Other sizes up to 75mm are available upon request.
Commercial Grade Wire Rope Grips: Unit of Measure - Each
31
12
3.6
9
4.4
160316
10
25
38
15
4.5
11
5.5
160317
12
30
46
18
5.4
13
6.6
160333
14
35
54
21
6.3
15
7.7
160318
16
40
61
24
7.2
18
8.8
Rope Size (mm)
20
ORDER CODE
8
Rope Size (mm)
160315
ORDER CODE
Not for lifting applications.
J (mm)
160003
H (mm)
Weight (kg)
0.06
G (mm)
G (mm)
8
F (mm)
D (mm)
22
B (mm)
B (mm)
41
A (mm)
A (mm)
M8
Size (mm)
Size (mm)
8
ORDER CODE
ORDER CODE
160002
160041
3
160036
12
160319
20
50
76
31
9
22
11
160029
3/4
160042
14
160321
22
55
84
34
9.9
24
12
160030
5
160037
16
165054
24
60
92
37
11
26
13
160031
6
160043
20
160337
26
65
99
40
12
28
14
160032
8
160044
22
160323
28
70
107
43
13
30
15
160035
10
160045
25
160324
32
80
122
49
15
35
24
160327
36
90
137
55
17
39
27
160340
44
110
168
68
20
48
33
160329
52
130
198
80
24
56
39
Other sizes available.
Rope Dia. (mm)
Bearing Surface (mm)
Width (mm)
Dia. of “U” Bolt (mm)
Double Throat Grips: Unit of Measure - Each ORDER CODE
05 - HARDWARE
Not for lifting applications.
Wire Rope Thimbles are made from mild steel and are hot dipped galvanised with blue paint on the tips in accordance with AS1138. Commercial Grade Thimbles are not manufactured to any standard and are made from light gauge material. Normally used in light applications and supplied in electro galvanised ¿QLVK Stainless Steel Thimbles are not manufactured to any standard and are usually used with stainless steel wire rope when corrosion could be a cause for concern. Solid Thimbles are used for loads that are secured by a bolt or pin and can be drilled (bored) out to match that pin or bolt, refer to AS1138. Wire Rope Thimbles - AS1138: Unit of Measure - Each
160009
10/12
40
52
10
160016
16
46
58
10
136
1300 722 999
Solid Heart Thimbles: Unit of Measure - Each
Rope Size (mm)
Weight (kg)
8
E (mm)
160375
D (mm)
6
C (mm)
160373
B (mm)
5
160374
A (mm)
3
Rope Dia. (mm)
160380
ORDER CODE
Order Code
Commercial Grade Galvanised Thimbles: Unit of Measure - Each
160330
16
96
71
27
52
17
1
160376
10
160331
20
117
84
29
63
22
1.05
160377
12
160364
28
170
125
44
90
30
4.2
160382
16
05 - HARDWARE
Other sizes available.
Other sizes available.
Crosby G-414 Thimbles: Unit of Measure - Each
Rope Dia.
(mm)
(in.)
160774
*6-7
1/4
160775
*8
160776
Weight Per 100 (kg)
ORDER CODE
• Available in Hot Dip galvanized or Stainless Steel (Type 304). • Stainless steel recommended for more corrosive environments where greater protection is required. • Greater protection against wear and deformation of the wire rope eye. • Longer service life. Dimensions (mm)
A
B
C
D
E
F
G
H
2.95
55.5
41.4
38.1
22.4
11.2
7.10
1.50
5.85
5/16
5.35
63.5
47.8
46.0
26.9
14.0
8.65
2.05
7.10
*9-10
3/8
9.80
73.0
54.0
54.0
28.7
16.8
10.4
2.80
8.65
160777
11-12
7/16
15.7
82.5
60.5
60.5
31.8
18.8
11.9
3.30
9.65
160778
*13-15
1/2 - 9/16
23.1
92.0
70.0
70.0
38.1
23.4
13.5
3.55
10.4
160779
*16
5/8
34.3
108
82.5
79.5
44.5
26.2
16.8
4.05
12.7
160780
*18-20
3/4
72
127
95.5
96.5
51.0
33.0
19.8
5.60
16.8
160781
22
7/8
81
140
108
108
57.0
37.3
23.9
5.60
19.1
160782
24-26
1
142
156
114
125
63.5
44.5
26.9
6.35
22.4
160783
28-32
1 - 1/8 - 1-1/4
181
178
130
149
73.0
47.8
33.3
6.35
28.7
160784
32-35
1 - 1/4 - 1-3/8
402
230
165
173
89.0
57.2
36.6
9.65
28.7
160785
35-38
1 - 3/8 - 1-1/2
587
229
159
181
89.0
66.5
39.6
12.7
28.7
160786
40
1 - 5/8
771
286
203
207
102
76.2
43.7
12.7
35.1
160787
44
1 - 3/4
805
310
229
216
114
77.7
46.7
12.7
33.3
160788
48-52
1 - 7/8 - 2
1259
384
305
264
152
85.9
53.0
12.7
38.1
160789
56
2 - 1/4
1792
435
356
302
178
98.6
60.5
16.0
41.4
WWW.BULLIVANTS.COM
137
Ferrules
160237
4.5
160176
5
160164
6
160200
6.5
160177
7
160165
8
160166
9
160167
10
160178
11
160168
12
160179
13
160169
14
160170
16
160171
18
160180
20
160172
22
160181
3.5
160188
4
160211
4.5
160189
5
160190
6
160191
6.5
160212
7
160213
8
160192
9
160193
10
160214
11
160194
12
160215
13
160195
14
160216
16
160217
18
160218
22
Brand
4
160187
160196
1/2
160220
3
Bridge & Co
160197
5/8
160222 3.2 Dolphin Marine
160227
3/4
160224
4
Dolphin Marine
160289
1
160260
4
Bridge & Co
160290
1-1/8
160293
1-3/4
160294
2
Other sizes available. Hand Swaged Copper Ferrules: Unit of Measure - Each
160219
1.6
160221
3.2
160223
4
24
160225
4.8
160182
26
Other sizes available.
160183
28
160184
30
160243
32
160185
34
160201
38
160202
40
165040
16
160203
42
160282
18
160245
44
160285
22
160204
46
160228
26
160205
54
160229
32
138
Steel Ferrules: Unit of Measure - Each
Hand Swaged Alloy Ferrules: Unit of Measure - Each
Size (mm)
160175
3
Size (mm)
3.5
160209
3/8
ORDER CODE
160174
2.5
160226
ORDER CODE
3
160208
Size (in.)
160173
2
Size (mm)
2.5
160186
ORDER CODE
160199
1.5
ORDER CODE
2
Size (mm)
160198
160207
Size (mm)
1.5
ORDER CODE
Size (mm)
160233
Copper Ferrules DIN Grade Australoc Ferrules – Grade Hand Swaged Nickel 3093: Unit of Measure - Each S505: Unit of Measure - Each Plated Copper Ferrules: Unit of Measure - Each
ORDER CODE
ORDER CODE
05 - HARDWARE
Aluminium Ferrules DIN Grade 3093: Unit of Measure - Each
160206
4
160249
4.8
160250
5
160251
6
160252
6.4
1300 722 999
Crosby S-409 Swage Buttons: Unit of Measure - Each
Size No.
160790
1 SB
3
1/8
0.91
10.7
12.7
3.56
10.2
15.5
160791
3 SB
5
3/16
1.81
14.2
17.8
5.08
13.2
21.3
160792
5 SB
6-7
1/4
3.63
17.3
26.9
7.87
14.7
33.5
160793
7 SB
8
5/16
7.26
22.4
28.7
9.14
19.6
33.8
160794
8 SB
9-10
3/8
6.80
22.4
37.6
10.7
19.6
42.9
160795
9 SB
11
7/16
13.6
28.7
41.4
12.2
26.2
49.3
160796
10 SB
13
1/2
22.7
33.3
48.0
14.0
29.5
55.1
160797
11 SB
14
9/16
31.8
36.6
51.3
15.5
32.8
61.2
160798
12 SB
16
5/8
45.4
39.6
61.5
17.0
36.1
73.4
160799
13 SB
18-20
3/4
59
42.7
69.6
20.3
39.6
82.6
160800
14 SB
22
7/8
100
50.8
83.1
23.9
45.7
98.0
160801
15 SB
25-26
1
141
57.2
93.2
26.9
52.1
111
160802
16 SB
28-29
1-1/8
204
65.0
103
30.2
58.4
122
160803
17 SB
31-32
1-1/4
295
71.4
116
33.8
65.0
138
(mm)
(in.)
Before Swage Dimensions (mm)
After Swage Dimensions (mm)
A
B
C
D Max. After Swage Dimensions
E Length*
05 - HARDWARE
Rope Size
Weight Per 100 (kg)
ORDER CODE
‡6ZDJH%XWWRQWHUPLQDWLRQVKDYHDQHI¿FLHQF\UDWLQJRIEDVHG on the catalog strength of wire rope. • Special processed, low carbon steel. • COLD TUFF® for better swageability. ‡6WDPSIRULGHQWL¿FDWLRQDIWHUVZDJLQJZLWKRXWFRQFHUQIRUIUDFWXUHV (as per directions in National Swaging Brochure).
* NOTE: Length is measured from outside end of termination.
WWW.BULLIVANTS.COM
139
NCG Cable Stockings
Single Eye “Cap” Style (Tubular): Unit of Measure - Each
Cable stockings are available in a variety of designs to suit different applications including cable hauling, load restraint, cable splicing (ing), re-roping cranes and airline or hydraulic hose restraint. Our cable stockings are serial numbered, stamped with LGHQWL¿FDWLRQDQGDQ\SURWUXGLQJZLUHHQGVDUHFRYHUHGZLWK plastic adhesive to reduce manual handling risks. Fitting Precautions
Lace Up: Unit of Measure - Each
165130
14-19
165131
19-28
165189
28-40
165196
40-55
165200
55-75
165209
75-95
165212
95-120
Offset Eye (Tubular): Unit of Measure - Each
140
14-19
165441
19-28
165443
28-40
165445
40-55
165446
55-75
165447
75-95
165448
95-120
To Suit Diameter of Cable (mm)
165439
This design allows the cable to through the stocking so it FDQEH¿WWHGDQ\GLVWDQFHIURPWKHFDEOHHQG,WVPDLQXVHLV to electrical and hydraulic and other hoses in marine, industrial and mining applications. Also used for strain relief on trailing supply lines.
ORDER CODE
To Suit Diameter of Cable (mm)
7KLVW\SHLVDÀDWZRYHQGHVLJQWKDWFDQEHZUDSSHGDURXQGWKH cable or rope at any position, and secured with a lace. This type FDQEHXVHGZKHUHLWLVQRWSRVVLEOHWR¿WDWXEXODUVWRFNLQJRYHU the end of the cable.
ORDER CODE
05 - HARDWARE
Standard Cable Stockings
To Suit Diameter of Cable (mm)
• Any sizes outside this range available on request • 2070 Galvanised Strand OR 316 Stainless Steel Strand • Copper OR Stainless Steel Ferrules • Soft Eye OR Thimbles
This is the most commonly used type of cable stocking. It is ¿WWHGRQWRWKHHQGRIWKHFDEOHLQRUGHUWRSXOOLWLQWRSODFH
ORDER CODE
1. Always ensure the entire plaited length of the stocking is in with the cable to be hauled. 2. Ease out any ‘bubbles’ or slack in the stocking to ensure maximum of grip to cable. 3. Always fasten the mouth end of the stocking to the cable by means of tie wire or similar. This will guard against accidental release, especially in the case of a reverse haul. 4. Always tape over the fastening at the mouth end to ensure a smooth transition from stocking to cable. Variations
165336
14-19
165337
19-28
165190
28-40
165338
40-55
165339
55-75
165340
75-95
165341
95-120
1300 722 999
Double Eye (Tubular): Unit of Measure - Each
Open Both Ends (Tubular): Unit of Measure - Each
This design has similar properties to the offset eye in that it can EH¿WWHGWRDQ\SRVLWLRQRQWKHFDEOH7KHH[WUDH\HLVSURYLGHG WROLIWWKHDVVHPEO\ZKLOHWKHRWKHUH\HLVPDGHRIIWRD¿[WXUH When hauling with only one eye the breaking strength is greatly reduced. To Suit Diameter of Cable (mm)
165432
19-28
165433
28-40
ORDER CODE
To Suit Diameter of Cable (mm)
165434
40-55
165408
10-14
165201
55-75
165409
14-19
165435
75-95
165178
19-28
165436
95-120
165410
28-40
165411
40-55
05 - HARDWARE
ORDER CODE
Stockings are a tubular design with no eye which allow a cable to be spliced or ed.
Specialty Stockings Heavy Duty (Tubular): Unit of Measure - Each
Non Conductive (Tubular): Unit of Measure - Each
ORDER CODE
To Suit Diameter of Cable (mm)
ORDER CODE
To Suit Diameter of Cable (mm)
Nylon stockings are available to suit Low and High Voltage Stockings are available for added tensile strength and durability. Aerial Bundled Conductor overhead lines.
165437
10-14
165412
2 x 35mm² LV ABC
165438
14-19
165413
2 x 50mm² LV ABC
165440
19-28
165414
2 x 95mm² LV ABC
165442
28-40
165415
3 x 120mm² HV ABC
165444
40-55
165416
3 x 150mm² HV ABC
WWW.BULLIVANTS.COM
141
Heavy Duty Graded Weave (Tubular): Unit of Measure - Each
ORDER CODE
To Suit Diameter of Cable (mm)
165417
8-11
165418
10-15
165419
15-21
165420
20-29
165421
27-35
165422
32-37
Hose Restraints (Tubular): Unit of Measure - Each
142
To Suit Diameter of Cable (mm)
These are double eyed cable stockings with a protective adhesive sheath over the “legs” of the stocking. They are designed to contain a pressurised hose in the event of hose connection failure. Hose Restraints are also available in custom lengths with double eyes at both ends to secure both ends and the entirety of a hose.
ORDER CODE
05 - HARDWARE
6WRFNLQJVDUHGHVLJQHGVSHFL¿FDOO\IRUKLJKWHQVLRQKDXOLQJRI bare or insulated conductor lines. They utilise extra material for higher breaking strengths at smaller cable diameters, and extra length for assured grip onto bare metal conductor.
165423
19-28
165425
28-40
165426
40-50
165427
50-60
165428
60-70
165429
70-85
165430
85-100
165431
100-120
1300 722 999
Sheave Blocks
Capacity (kg)
Head Fitting
PWB Part No..
164448
63
10.0
250
Hook
45622
164080
75
12.0
250
Hook
45639
164089
100
16.0
500
Hook
45672
164098
125
20.0
1000
Hook
45706
164102
150
24.0
1000
Hook
45723
164454
200
32.0
2000
Hook
45757
164455
63
10.0
250
Eye
45614
164456
75
12.0
250
Eye
45631
164087
100
16.0
500
Eye
45664
164457
125
20.0
1000
Eye
45698
164458
150
24.0
1000
Eye
45715
164459
200
32.0
2000
Eye
45749
05 - HARDWARE
Rope Size (mm)
An extensive range of manually operated Snatch and Sheave %ORFNVKDVEHHQVSHFL¿FDOO\GHVLJQHGIRUXVHZLWK0DQLOODDQG Wire Rope. With fully interchangeable sheaves and supplied with either drop forged swivel hooks or eyes, this range comes with beckets standard on single and double blocks. Bronze Bushes and safety latches are also standard across the range. PWB Anchor Snatch Blocks - Wire Rope: Unit of Measure - Each
Sheave Dia. (mm)
PWB Anchor Manually Operated Sheave Blocks
ORDER CODE
Bullivants can supply a broad range of blocks including Single, Snatch, Double, Treble and the world renown Crosby range of pulley blocks, up to 50 tonne WLL. Types and Selection Blocks are used in a variety of applications from crane hoist and OXI¿QJV\VWHPVVKLSORDGHUVFRQFUHWHµWLOWVODE¶DUUDQJHPHQWV and many more.
Capacity (kg)
Head Fitting
PWB Part No..
5.0
250
Hook
45623
164081
75
6.0
250
Hook
45640
164090
100
8.0
500
Hook
45673
164099
125
10.0
1000
Hook
45707
ORDER CODE
Sheave Dia. (mm)
Rope Size (mm)
Capacity (kg)
164009
150
12.0
1000
Hook
45724
164021
63
5.0
250
Hook 45624
1.0
164010
200
16.0
2000
Hook
45758
164025
75
6.0
250
Hook 45641
1.0
165016
63
5.0
250
Eye
45615
164034
100
8.0
500
Hook 45674
2.3
164079
75
6.0
250
Eye
45632
164043
125
10.0
1000 Hook 45708
4.2
164088
100
8.0
500
Eye
45665
164049
150
12.0
1000 Hook 45725
6.7
164097
125
10.0
1000
Eye
45699
164054
200
16.0
2000 Hook 45759
13.8
164008
150
12.0
1000
Eye
45716
164019
63
5.0
250
Eye
45616
0.8
164111
200
16.0
2000
Eye
45750
164023
75
6.0
250
Eye
45633
1.0
164032
100
8.0
500
Eye
45666
2.1
164449
125
10.0
1000
Eye
45700
3.8
164450
150
12.0
1000
Eye
45717
6.1
164451
200
16.0
2000
Eye
45751
13.6
PWB Anchor Snatch Blocks - Manilla Rope: Unit of Measure - Each
Weight (kg)
Rope Size (mm)
63
PWB Part No.
Sheave Dia. (mm)
164078
Head Fitting
ORDER CODE
PWB Anchor Single Sheave Blocks - Wire Rope: Unit of Measure - Each
PWB Anchor Single Sheave Blocks – Manilla Rope: Unit of Measure - Each
WWW.BULLIVANTS.COM
143
75
12
250
Hook
45638
164033
100
16
500
Hook
45671
164042
125
20
1000
Hook
45705
164460
150
24
1000
Hook
45722
203749
200
32
2000
Hook
45756
164461
63
10
250
Eye
45613
164462
75
12
250
Eye
45630
164031
100
16
500
Eye
45663
164463
125
20
1000
Eye
45697
164464
150
24
1000
Eye
45714
164053
200
32
2000
Eye
45748
PWB Anchor Double Sheave Blocks – Wire Rope: Unit of Measure - Each
PWB Part No.
PWB Part No.
164024
Head Fitting
Head Fitting
45621
Capacity (kg)
Capacity (kg)
Hook
Rope Size (mm)
Rope Size (mm)
250
Sheave Dia. (mm)
Sheave Dia. (mm)
10
ORDER CODE
ORDER CODE
63
164017
63
10
250
Hook
45619
164022
75
12
250
Hook
45636
164495
100
16
750
Hook
45669
164040
125
20
1000
Hook
45703
164496
150
24
1500
Hook
45720
164497
63
10
250
Eye
45611
164498
75
12
250
Eye
45628
164499
100
16
750
Eye
45661
164500
125
20
1000
Eye
45695
164501
150
24
1500
Eye
45712
164502
200
32
3000
Eye
45746
Sheave Dia. (mm)
Rope Size (mm)
Capacity (kg)
Head Fitting
PWB Part No.
164018
63
5
250
Hook
45620
164487
75
6
250
Hook
45637
ORDER CODE
Sheave Dia. (mm)
Rope Size (mm)
Capacity (kg)
Head Fitting
PWB Part No.
PWB Anchor Treble Sheave Blocks – Wire Rope: Unit of Measure - Each
ORDER CODE
05 - HARDWARE
164020
164488
100
8
750
Hook
45670
164503
63
5
250
Hook
45626
164041
125
10
1000
Hook
45704
164504
75
6
250
Hook
45643
164048
150
12
1500
Hook
45721
164505
100
8
750
Hook
45676
164489
200
16
3000
Hook
45755
164506
125
10
1000
Hook
45710
164490
63
5
250
Eye
45612
164507
150
12
1500
Hook
45727
164491
75
6
250
Eye
45629
164508
200
16
4000
Hook
45761
164492
100
8
750
Eye
45662
164509
75
6
250
Eye
45635
164493
125
10
1000
Eye
45696
164510
100
8
750
Eye
45668
164047
150
12
1500
Eye
45713
164511
125
10
1000
Eye
45702
164494
200
16
3000
Eye
45747
164512
150
12
1500
Eye
45719
PWB Anchor Double Sheave Blocks – Manilla Rope: Unit of Measure - Each
144
PWB Anchor Treble Sheave Blocks – Manilla Rope:
1300 722 999
Unit of Measure - Each
Crosby Snatch Blocks
164026
75
12
250
Hook
45642
164514
100
16
750
Hook
45675
164515
125
20
1000
Hook
45709
164516
150
24
1500
Hook
45726
164517
75
12
250
Eye
45634
164518
100
16
750
Eye
45667
164519
125
20
1000
Eye
45701
164520
150
24
1500
Eye
45718
PWB Anchor Trawl Blocks: Unit of Measure - Each
Type
WLL (tonnes)
Sheave Dim. (in.)
Rim Thickness
Net Weight (kg)
164521
Needle
5
6
2¾
11.9 46732
164522
Tapered
10
8
2 7/8 19.7 46741
5
6
2¾
164523 Bronze Brushed
WWW.BULLIVANTS.COM
PWB Part No.
ORDER CODE
*Distributed PWBsteel Anchor • Manufactured with the highestby quality available • Corrosive resistant for increased block life in a salt water environment ‡%ORFNVDUHVXSSOLHGZLWKDSUHVVXUHOXEHG¿WWLQJIRUD longer lock life • Bearings are sealed for increased block life and performance • Each block is individually tested for maximum safety
14.2 46736
165450
*3
BB
8-10
2
1.90
165342
**3
BB
8-10
2
1.81
165343 **4-1/2
BB
10-13
4
5.44
165344
6
BB
16-19
8
12.6
165345
6
RB
16-19
8
12.6
165346
8
BB
16-19
8
15.4
165347
8
RB
16-19
8
15.4
165348
10
BB
16-19
8
19.1
165349
10
RB
16-19
8
19.1
165350
12
BB
16
8
22.2
165351
12
RB
16
8
22.2
165352
12
BB
19
8
22.2
165353
12
RB
19
8
22.2
165354
14
BB
16
8
25.4
165355
14
RB
16
8
25.4
165356
14
BB
19
8
25.4
165357
14
RB
19
8
25.4
165358
16
BB
19
15
61
165359
16
RB
19
15
61
165360
16
BB
22
15
61
165361
16
RB
22
15
61
165362
18
BB
22
15
70
165363
18
RB
22
15
70
165364
18
BB
26
15
70
165365
18
RB
26
15
70
145
05 - HARDWARE
45625
Weight Each (kg.)
PWB Part No.
Hook
WLL (tonnes)*
Head Fitting
250
Wire Rope Size (mm)
Capacity (kg)
10
Bearing Code
Rope Size (mm)
63
Sheave Dia. (in.)
Sheave Dia. (mm)
164513
ORDER CODE
ORDER CODE
• Drop forged, heat treated swivel hook or swivel shackle. • Hook and shackle assemblies on 8” through 14” sizes can be interchanged. • Can be furnished with bronze bushings or roller bearings. ‡3UHVVXUHOXEH¿WWLQJV • 430 and 431 blocks have exclusive bolt retaining spring to assure no lost bolts. • Can be furnished with hook latch. • 8” and 10” models furnished with dual rated wireline sheaves. • Fatigue Rated. • All sizes are RFID EQUIPPED. Crosby 419 Snatch Blocks Unit of Measure - Each
26-28
39.5
165367
20
8
RB
26-28
39.5
165368
20
10
BB
26-28
45.8
165369
20
10
RB
26-28
45.8
165370
20
12
BB
26
52
165371
20
12
RB
26
52
165372
20
12
BB
28
52
165373
20
12
RB
28
52
165374
20
14
BB
26
61
165375
20
14
RB
26
61
165376
20
14
BB
28
61
165377
20
14
RB
28
61
165378
25
18
BB
26
118
165379
25
18
RB
26
118
165380
25
18
BB
28
118
165381
25
18
RB
28
118
165382
30
20
BB
28
181
165383
30
20
RB
28
181
165384
30
20
BB
32
181
165385
30
20
RB
32
181
165386
30
24
BB
28
215
165387
30
24
RB
28
215
165388
30
24
BB
32
215
165389
30
24
RB
32
215
Weight Each (kg.)
Weight Each (kg.)
BB
Wire Rope Size (mm)
Wire Rope Size (mm)
8
Sheave Dia. (mm)
Bearing Code
20
WLL (tonnes)*
Sheave Dia. (in.)
165366
‡$ZLGHYDULHW\RIFRQ¿JXUDWLRQV • 4, 8, 12 or 15 metric ton capacity • 10mm to 25mm wire line sizes ‡3DLQWHGRU*DOYDQL]HG¿QLVK • 203mm and 254mm blocks furnished with dual rated wireline sheaves. • Forged steel swivels, tees, yokes and shackles are Quenched & Tempered. • Sheave lubrication through center pin for easy maintenance. • Design factor of 4 to 1 • All blocks 356mm and larger are furnished with McKissick® 5ROO)RUJHGŒVKHDYHVZLWKÀDPHKDUGHQHGJURRYHV • Recessed sideplate design reduces the gap between the sheave rim and the sideplate, allowing the sheave assembly to be captured in the block if loss of center pin occurs. • Sealed tapered roller bearings extend the life of the center pin and bearings, and allows for faster line speeds than recommended with standard snatch blocks. ‡6KDFNOH¿WWLQJVZLYHOVIRUHDV\SRVLWLRQLQJ • Suitable for hoisting personnel, contingent upon all employees, including the winch operator, being trained to follow any applicable Federal, local and industry standards. • Tugger/Derrick applications: API RP54 • Tower applications: OSHA directive L 2-1.36 • Holes through side plates are available for secondary block securement device. ‡0DQXIDFWXUHGE\DQ$3,4&HUWL¿HGIDFLOLW\ ‡7\SH$SSURYDODQGFHUWL¿FDWLRQLQDFFRUGDQFHZLWK ABS 2006 Steel Vessel Rules 1-1-17.7, and ABS Guide IRU&HUWL¿FDWLRQRI&UDQHV • All sizes are RFID EQUIPPED. ORDER CODE
WLL (tonnes)*
Crosby M-491 Tower Derrick Hoist Block: Unit of Measure - Each
ORDER CODE
05 - HARDWARE
Crosby 431 Snatch Blocks: Unit of Measure - Each
165407
4
203
10 - 13
16
165390
8
254
10 - 13
25
165391
8
254
13 - 14
25
165392
12
254
13 - 14
25
165393
12
356
16
43
165394
12
356
19
43
165395
15
406
22
68
165396
15
406
25
48
*Ultimate Load is 4 times the Working Load Limit
146
1300 722 999
To Suit Wire Size (in.)
100
3/8-1/2
Weight (kg)
Sheave Dia. (mm)
4
Gunnebo Part No.
WLL (tonnes)
164075
Head Fitting
ORDER CODE
Gunnebo Johnson Swivel Hook - Snatch Block Wire: Unit of Measure - Each
Swivel Hook JSB04S04BS
7
Other sizes and capacities available.
Sheave Dia. (mm)
To Suit Wire Size (in.)
WLL (tonnes)
Head Fitting
Gunnebo Part No.
Weight (kg)
164004
75
5/16-3/8
2
Swivel Shackle
SB2S3BS
2.4
164005
100
3/8-1/2
4
Swivel Shackle
SB4S4BS
6.8
164076
152
3/8-1/2
4
Swivel Shackle
SB4S6BS
8.2
164006
150
5/8-3/4
8
Swivel Shackle
SB8S6BS
13.2
164007
203
5/8-3/4
8
Swivel Shackle
SB8S8BS
16.5
164441
250
3/4-7/8
12
Swivel Shackle SB12S10BS
30
164442
350
3/4-7/8
15
Swivel Shackle SB15S14BS
50
164443
400
1-1 1/8
20
Swivel Shackle SB22S16BS
80
164444
500
1 1/8-1 1/4
30
Swivel Shackle SB30S20BS
155
05 - HARDWARE
ORDER CODE
Gunnebo Johnson Swivel Shackle - Snatch Block Wire: Unit of Measure - Each
Other sizes and capacities available.
Hooks
Grip Clip (R Clip): Unit of Measure - Each
Alloy Shank Hook with Latch: Unit of Measure - Each
Types and Selection
4
12-22
Weight (kg)
160034
121525
11
6.12
165030
15
8.16
Other sizes available.
Other sizes available.
ORDER CODE
WLL (tonnes)
Eye Size (mm)
Weight (kg)
Fitted with industrial thrust bearing to rotate under load and seals. Compact design for easy handling.
164132
16
88
15.8
164133
18
105
16
Other sizes available.
Lynch Pin: Unit of Measure - Each
Pin Diameter (mm)
10-12
WLL (tonnes)
To suit Shaft Size (mm)
3
ORDER CODE
Size (mm)
160033
ORDER CODE
ORDER CODE
Swivel Crane hooks and Shank hooks are available in a standard range up to 25t with larger available. Are manufactured in accordance with AS3777. Swivel Alloy Hooks with Thrust 6DIHW\ODWFK¿WWHGDVVWDQGDUG Bearing & Seals: Unit of Measure - Each
165046
4.5
165135
6
165136
8
165251
11
Other sizes available.
WWW.BULLIVANTS.COM
147
Related Documents 543cg
Bullivants Lifting Hardware 4m6266
December 2021 0
Bullivants Handbook 2rn4x
December 2019 105
Lifting Appliance Lifting Gear y4r6l
December 2019 80
Bullivants Fabricated Products Catalogue 3d5q4o
November 2019 40
Bullivants Rigging Handbook V2 p5y1x
December 2019 26
Bullivants Height Safety Catalogue h4k63
November 2019 51More Documents from "Ashok Kumar" 3b12
What Has Happened To Lulu By Charles Causley 514p1x
November 2019 97
2. Comparison Bw Hvdc And Hvac 6i6y
November 2021 0
Crane Calculation For Single Girder Bridge Crane 5g5738
December 2021 0
Bullivants Lifting Hardware 4m6266
December 2021 0
Cs Louvre Pressure Drop Calculator 1g1h3l
December 2019 88